ddr_spd: add routine for printing DDR2 SPD contents in human-readable format ...

---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62                    OK (0xDF)
Total number of bytes in EEPROM                  256
Fundamental Memory type                          DDR2 SDRAM
SPD Revision                                     1.2

---=== Memory Characteristics ===---
Maximum module speed                             800 MHz (PC2-6400)
Size                                             2048 MB
Banks x Rows x Columns x Bits                    8 x 14 x 10 x 64
Ranks                                            2
SDRAM Device Width                               8 bits
Module Height                                    30.0 mm
Module Type                                      SO-DIMM (67.6 mm)
DRAM Package                                     Planar
Voltage Interface Level                          SSTL 1.8V
Module Configuration Type                        No Parity
Refresh Rate                                     Reduced (7.8 us) - Self Refresh
Supported Burst Lengths                          4, 8
Supported CAS Latencies (tCL)                    6T
tCL-tRCD-tRP-tRAS                                6-6-6-18 as DDR2-800
Minimum Cycle Time                               2.5 ns at CAS 6
Maximum Access Time                              0.40 ns at CAS 6
Maximum Cycle Time (tCK max)                     8 ns

---=== Timing Parameters ===---
Address/Command Setup Time Before Clock (tIS)    0.17 ns
Address/Command Hold Time After Clock (tIH)      0.25 ns
Data Input Setup Time Before Strobe (tDS)        0.05 ns
Data Input Hold Time After Strobe (tDH)          0.12 ns
Minimum Row Precharge Delay (tRP)                15.00 ns
Minimum Row Active to Row Active Delay (tRRD)    7.50 ns
Minimum RAS# to CAS# Delay (tRCD)                15.00 ns
Minimum RAS# Pulse Width (tRAS)                  45.00 ns
Write Recovery Time (tWR)                        15.00 ns
Minimum Write to Read CMD Delay (tWTR)           7.50 ns
Minimum Read to Pre-charge CMD Delay (tRTP)      7.50 ns
Minimum Active to Auto-refresh Delay (tRC)       60.00 ns
Minimum Recovery Delay (tRFC)                    127 ns
Maximum DQS to DQ Skew (tDQSQ)                   0.20 ns
Maximum Read Data Hold Skew (tQHS)               0.30 ns

---=== Manufacturing Information ===---
Manufacturer JEDEC ID                            7f 98 00 00 00 00 00 00
Manufacturing Location Code                      0x05
Part Number
Manufacturing Date                               2014-W47
Assembly Serial Number                           0x43266892

Signed-off-by: Alexander Smirnov <alllecs@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: DDR3 SPD verification support ...

Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver.

This is based on the equivalent files from U-Boot version git-be937b5.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: DDR2 SPD checksum. ...

The code calculates the DDR2 SPD checksum as per JEDEC standard
No 21-C Appendix X (revision 1.2)

The code is based on the equivalent files from U-Boot version
git-a71d45d.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>