LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2019-03-18	c00193a Browse files » Revert "fix zbarebox linking with new ld" ... --no-dynamic-linker is already added just a few lines below, do not add the option twice. This option also needs to be embedded in a test if the linker supports this option which we already have in the other place adding this option. This reverts commit `25de306`. Sascha Hauer committed on 18 Mar 2019
2019-03-18	4d9d350 Browse files » ARM: Makefile: restore kindle3 imxcfg-y setting ... Commit 45f38c1a846f ("ARM: Makefile: Drop unnecessary imxcfg-y settings") dropped the imximg generation for the kindle3. This device is not covered within multiimage support and can be configured with kindle3_defconfig. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 17 Mar 2019 Sascha Hauer committed on 18 Mar 2019
2019-03-07	369d39a Browse files » Merge branch 'for-next/spd' Sascha Hauer committed on 7 Mar 2019
	8f397a4 Browse files » Merge branch 'for-next/rpi' Sascha Hauer committed on 7 Mar 2019
	63557eb Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 7 Mar 2019
	cf99cb6 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 7 Mar 2019
	5c126a1 Browse files » Merge branch 'for-next/efi' Sascha Hauer committed on 7 Mar 2019
	9e72ea7 Browse files » images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded ... For platforms such as the at91, the boot ROM imposes an upper limit on barebox file size. Prior to 5a1a5ed253 ("ARM: images: use piggydata"), BAREBOX_MAX_PBLX_SIZE seems to have been the way to go for limiting the size of the final barebox binary when using the PBL. With pblx removed, this variable is of no use, so have the existing BAREBOX_MAX_IMAGE_SIZE replace its functionality. Currently BAREBOX_MAX_IMAGE_SIZE is only checked against in the non-PBL case, so add a check in the PBL case as well. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 19 Feb 2019 Sascha Hauer committed on 7 Mar 2019
	743d8ff Browse files » ARM: dts: imx6phytec: switch to new partitioning scheme ... Both Linux and barebox support this new scheme and it's the actually the recommended one. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 19 Feb 2019 Sascha Hauer committed on 7 Mar 2019
	006bdf8 Browse files » ARM: i.MX6UL: liteSOM: depend on DDR controller settings ... Initially we depended on DDR controller settings for liteSOM and liteboard. With 33fdc89d4cbd ("dts: update to v5.0-rc1") a `device_type = "memory";` property was added to imx6ul-litesom.dtsi file, which causes "ram0" to be added with 512MB size (value in dtsi) instead of the real 256MB size that is configured in barebox-grinn-liteboard-256mb.img. As a result Linux kernel fails to boot. Lets depend on DDR controller settings, by removing whole `/memory` node from device tree. This makes barebox-grinn-liteboard-256mb.img able to boot Linux kernel once again. Reported-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marcin Niestroj authored on 26 Feb 2019 Sascha Hauer committed on 7 Mar 2019
	25de306 Browse files » fix zbarebox linking with new ld ... Signed-off-by: 张忠山 <zzs213@126.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> 张忠山 authored on 6 Mar 2019 Sascha Hauer committed on 7 Mar 2019
2019-03-06	70187de Browse files » ARM: rpi: Add mini UART debug_ll support ... The raspberry pi 3 comes up with the mini UART as default, so allow to use it for debug_ll output. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2019
	b4db05f Browse files » ARM: rpi: move debug UART Kconfig settings ... In contrast to other architectures, R.Pi debug UART config was placed under the "System Type" menu, not under the "Debugging -> low-level debugging port". This made this setting easy to miss when enabling low level debug mesages. While at it use the existing base address defines rather than defining them again in Kconfig. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2019
	1b9f6ee Browse files » debug_ll: Move pl011 header file to architecture independent place ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2019
	c809f0b Browse files » ARM: rpi: Move UART base address definitions to header file ... Move defines to header file to make them reusable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2019
2019-03-05	49ffafe Browse files » esdhc-xload: Move to drivers/mci ... The esdhc-xload code will be used by upcoming Layerscape support aswell, so move it from architecture code to drivers/mci/. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Mar 2019
2019-03-04	2f054d3 Browse files » ddr_spd: Update from U-Boot ... This updates the ddr_spd.h header file from U-Boot-2019.01 with some small changes: - typedefs are removed - "_s" suffix from struct types removed - remove unnecessary "extern" from function declarations Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Mar 2019
	b88872f Browse files » ARM: Fix cpu_info for armv8 ... We have get_cr() to get the control register for the different exception levels. Use it rather than the variant hardcoded for EL1. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Mar 2019
	67e38cd Browse files » ARM: rpi: save bootargs from VC FDT to vc.bootargs ... When booting a Raspberry Pi, it is useful to extract bootargs from the device tree that was created by the VideoCore firmware. These bootargs contain for example settings for the framebuffer that the kernel needs to properly set the video output. This commit extracts the bootargs in the board initialization code and saves them to the vc.bootargs global variable. For example, a bootloader environment can then add the contents of this variable to linux.bootargs.vc, which then gets included into the final bootargs for the kernel using CONFIG_FLEXIBLE_BOOTARGS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tomaz Solc authored on 27 Feb 2019 Sascha Hauer committed on 4 Mar 2019
	e390c87 Browse files » ARM: rpi: save fdt that was passed from VideoCore ... On Raspberry Pi, VideoCore firmware creates a device tree that contains information about peripherals that were initialized by VideoCore based on settings in config.txt. Normally this device tree is passed to the Linux kernel via a pointer in the r2 register. A bootloader needs to pass this device tree to the kernel, or some peripherals will not work correctly. Since the VideoCore device tree is not compatible with barebox, we can't just pass it to barebox_arm_entry() as the internal barebox device tree. This commit makes the prebootloader code copy the device tree from VideoCore into a scrap RAM area just above the area reserved for the bootloader. Board initialization code in the bootloader proper then copies it into a file /vc.dtb. The bootloader environment is then free to pass this file to the kernel at boot (e.g. via bootm -o). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tomaz Solc authored on 27 Feb 2019 Sascha Hauer committed on 4 Mar 2019
	49a46e5 Browse files » ARM: start: save end of memory passed to start. ... Knowing the address of the end of the memory area used by Barebox is useful if PBL stores some extra data after it, so that board init code can later retrieve it from there. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tomaz Solc authored on 27 Feb 2019 Sascha Hauer committed on 4 Mar 2019
	edde68e Browse files » ARM: imx8mq-zii-ultra: Add USB related nodes ... Add nodes for exposed USB ports as well as USB hub connected to one of them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Feb 2019 Sascha Hauer committed on 4 Mar 2019
	3228aba Browse files » ARM: dts: imx8mq: Add nodes for USB IP blocks ... Add node for USB IP block that is missing in upstream DTS. This patch should be reverted once that changes. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Feb 2019 Sascha Hauer committed on 4 Mar 2019
	c668288 Browse files » ARM: imx8mq-zii-ultra: Enable PCIE1 and PCIE2 ... Enable PCIE1 and PCIE2 used on both Zest and RMB3 boards. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Feb 2019 Sascha Hauer committed on 4 Mar 2019
2019-02-27	c86f65c Browse files » MIPS: ath79: increase malloc size to 8 MiB ... with 4 MiB we are not able even to start latest kernel. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 25 Feb 2019 Sascha Hauer committed on 27 Feb 2019
	5bb3254 Browse files » firmware-zynqmp: port from linux ... Port Xilinx Zynq MPSoC Firmware layer driver from linux. Signed-off-by: Thomas Haemmerle <thomas.haemmerle@wolfvision.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Thomas Haemmerle authored on 21 Feb 2019 Sascha Hauer committed on 27 Feb 2019
	e986cb4 Browse files » ARM: imx8mq: Add nodes for PCIE1 and PCIE2 IP blocks ... Add node for PCE1 and PCIE2 IP block that is missing in upstream DTS. This patch should be reverted once that changes. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Feb 2019 Sascha Hauer committed on 27 Feb 2019
	737487b Browse files » ARM: imx8mq: Add node for GPC IP block ... Add node for GPC IP block that is missing in upstream DTS. This patch should be reverted once that changes. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Feb 2019 Sascha Hauer committed on 27 Feb 2019
	226ba89 Browse files » ARM: imx8mq: Add node for SRC IP block ... Add node for SRC IP block that is missing in upstream DTS. This patch should be reverted once that changes. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Feb 2019 Sascha Hauer committed on 27 Feb 2019
2019-02-25	af5383e Browse files » clk: at91: update to PMC bindings ... Based on kernel 5.0-rc6 update at91 clk support to match the new PMC bindings. Manually added all changes done in the kernel from 4.9-rc3 to 5.0-rc6. New drivers required was added as seperate commits. This includes dt-compat code required to support at91sam5d3, as this is not yet ported to use the new PMC bindings. clk-programmable saw some extra changes - it had never been bulit. It is used only by at91sama5d2 - and barebox has no board support for this cpu (yet). The CONFIG_SOC symbols is used to select the relevant drivers. CONFIG_SOC_SAM9 selects several drivers, and in the future this can be split to keep the image size down. In the kernel CLK_OF_DECLARE_DRIVER() can be used for a two step init. In barebox this is a simple one step init. It was added to have less differences between the kernel and the barebox versions of the drivers. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 24 Feb 2019 Sascha Hauer committed on 25 Feb 2019