ARM: stm32mp1: Add serial driver ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial_ns16550: add raspberry pi compatible and init ...

Add the compatible for the Raspberry Pi AUX UART and an init function which
enables it via the aux register and configures the correct shift value.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial_ns16550: handle default reg-io-width ...

According to the device tree bindings for 8250, width is an optional property.
Default to 1 which is the same default value as used by the kernel.
Before this change the driver would not work for device trees which do not
include the optional binding.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/missing-prototypes'

Merge branch 'for-next/misc'

serial: amba-pl011: fix "no previous prototype for 'pl011_init_port'" warning ...

The patch fixes the following compiler's warning:

drivers/serial/amba-pl011.c:151:5: warning: no previous prototype for ‘pl011_init_port’ [-Wmissing-prototypes]
 int pl011_init_port (struct console_device *cdev)
     ^~~~~~~~~~~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: clps711x: Determine device name from device tree ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: clps711x: Use DIV_ROUND_CLOSEST() for baudrate calculation ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: clps711x: Switch to SPDX identifier ...

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: clps711x: Change compatible string ...

This patch changes compatible string for CLPS711X serial driver
to "cirrus,ep7209-uart" for conform with linux kernel.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: amba-pl011: Fix regulator_get() return check ...

NULL is used to designate a dummy regulator, so it it should be safe
to use against regulator_enable(). Any value that would retrun true
for IS_ERR(), OTOH, is not. Such value would also pass "if (r)" check
without any problems.

Fix the code to use !IS_ERR() instead.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serdev: select POLLER ...

A lot of the inner working of the serdev framework depend on the poller,
so there is no point in allowing to build without poller support.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: lpuart: Avoid division by zero when requested baudrate is ...

With serdev device support added there's now a corner case where:

 1. There is a DT node for a serdev device on one of the UARTs
 2. There is no driver that binds against serdev device's compatibility
    string

with 1 and 2 being true it is possible to end up in a situation where
a particualr UART has not been initalized to any baudrate when
clock_notifier_call_chain() gets called. This effectively translates
to

	set_baudrate(uart, 0);

which for LPUART driver result in a division by zero.

To avoid this problem, convert lpuart_serial_setbaudrate() to treat
zero baudrate as a request to disable the UART. While we are at it add
a BUG_ON() to lpuart_setbrg() to simplify finding any future bugs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: i.MX: Add i.MX8 support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/serdev'

serial: Drop .remove functions from all drivers ...

Depending on specifics, some 'serdev' devices might need prevent
parent console device from being removed and corresponding memory
deallocated to properly function until the very end of Barebox's
execution. An example of such a use-case would be a reset handler
relying on a serdev device for transport.

To avoid having to develop complicatione reference counting/ownership
scheme drop all of the code that calls console_unregister() and frees
the memory effectively making the problem above impossible to arise.

All of the de-initialization that serial drivers were doing in their
.remove functions was somewhat superflous anyway, so this change
should be pretty harmless.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: Add simplified 'serdev' framework from Linux kernel ...

Port 'serdev' UART-slave deivce framework found in recent Linux
kernels (post 4.13) in order to be able to port 'serdev' slave drivers
from Linux.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial/lpuart: Do not enable UART FIFO ...

Using FIFO in LPUART results in subtle serial input draining issues
which are quite difficult to reproduce and troubleshoot. Since the
change offered only moderate performance gain revert the code to
operate in no-FIFO mode to avoid FIFO-related problems alltogether.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ns16550: provide big-endian support ...

we need it at least for QCA AR9344

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ns16550: emit an error message if getting the clock fails ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: fix registering multiple consoles ...

Consoles need to be registered with the "console" device name so that
they are probed by the correct driver. The barebox_register_console()
was already forcing this as it was overwriting the name that was being
passed as argument, but it was failing to provide a unique id for
each new console, so the underlying register_device() would just
return an error when wanting to re-register a device with device name
"console" and id 0.

We remove the unused name parameter from barebox_register_console() as
it is really nowhere used, and also specify DEVICE_ID_DYNAMIC as id,
so that a new unique device id is given to each newly registered
console device.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: atmel: Add DT compatibility table ...

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/efi'

serial: atmel: Check result of clk_get() ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: add serial driver support ...

So now we can stop to use the efi-stdio as this driver
print on the Framebuffer and the serial at the same time.

This is specially usefull if we want to use the framebuffer via efi-gop for
something else.

Do not forget to disable the efi-stdio device before enabling the console
otherwise you will get double printing.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move x86 efi boot support to x86 arch ...

prepare to drop the efi arch as efi boot up is not arch sepecific

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: move bus driver to driver/efi ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx'

Merge branch 'for-next/efi'

serial: ns16550: Set read/write functions depending on reg-io-width ...

Set proper register read/write functions depending on reg-io-width
device tree property.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>