LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / video

2019-03-21	43e02c5 Browse files » treewide: surround Kconfig file paths with double quotes ... Based on Linux commit `8636a1f` This will be needed when you sync Kconfig with Linux 5.0 or later. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masahiro Yamada authored on 20 Mar 2019 Sascha Hauer committed on 21 Mar 2019
2019-03-18	bb414a6 Browse files » drivers: video: Fix parsing oftree timings ... This patch fixes the parsing of the display timings options if the range is specified (min/typ/max). Also fixed the double release of memory in case of failure. barebox 2018.12.0-00341-g23b28d33a-dirty #6 Fri Mar 15 09:20:25 MSK 2019 Board: Mega-Milas Informer i.MX6 detected i.MX6 Quad revision 1.2 i.MX reset reason POR (SRSR: 0x00000001) mdio_bus: miibus0: probed eth0: got preset MAC address: 50:2d:f4:07:71:0b nand: NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit), 1024MiB, page size: 2048, OOB size: 64 Bad block table found at page 524224, version 0x01 Bad block table found at page 524160, version 0x01 m25p80 flash@00: n25q128a13 (16384 Kbytes) imx-usb 2184000.usb@2184000: USB EHCI 1.00 imx-usb 2184200.usb@2184200: USB EHCI 1.00 imx-esdhc 2198000.usdhc@2198000: registered as mmc2 imx-ipuv3 2400000.ipu@2400000: IPUv3H probed ERROR: /ldb/lvds-channel@0/display-timings/PH320240T: illegal timing specification in clock-frequency ERROR: /ldb/lvds-channel@0/display-timings/PH320240T: error reading timing properties ERROR: /ldb/lvds-channel@0: error in timing 1 ERROR: unable to handle NULL pointer dereference at address 0x00000013 pc : [<4fe05742>] lr : [<4fe05849>] sp : 4ffefa80 ip : ffffffff fp : 2fefe84c r10: 2ff656e8 r9 : 0000002c r8 : 2ff19630 r7 : 00000000 r6 : 0000004c r5 : 2ff65960 r4 : 00000007 r3 : 00000013 r2 : 00000000 r1 : 4fe87584 r0 : 2fefb460 Flags: nzcv IRQs off FIQs off Mode SVC_32 [<4fe05742>] (remove_free_block+0xe/0x3e) from [<4fe05849>] (block_locate_free+0x7f/0x88) [<4fe05849>] (block_locate_free+0x7f/0x88) from [<4fe0599b>] (tlsf_malloc+0x17/0x32) [<4fe0599b>] (tlsf_malloc+0x17/0x32) from [<4fe0559b>] (malloc+0x13/0x24) [<4fe0559b>] (malloc+0x13/0x24) from [<4fe3a1f3>] (strdup+0x11/0x22) [<4fe3a1f3>] (strdup+0x11/0x22) from [<4fe006f3>] (pr_puts+0x33/0x84) [<4fe006f3>] (pr_puts+0x33/0x84) from [<4fe00803>] (dev_printf+0x6f/0x8c) [<4fe00803>] (dev_printf+0x6f/0x8c) from [<00000000>] (0x0) [<4fe54715>] (unwind_backtrace+0x1/0x60) from [<4fe00de1>] (panic+0x1d/0x34) [<4fe00de1>] (panic+0x1d/0x34) from [<4fe5285d>] (do_exception+0xd/0x10) [<4fe5285d>] (do_exception+0xd/0x10) from [<4fe528bd>] (do_data_abort+0x21/0x2c) [<4fe528bd>] (do_data_abort+0x21/0x2c) from [<4fe524d4>] (do_abort_6+0x48/0x54) ### ERROR ### Please RESET the board ### Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 15 Mar 2019 Sascha Hauer committed on 18 Mar 2019
2019-01-29	5c94085 Browse files » devfs: Drop dev_lseek_default() ... Only the following cdevs do not declare an .lseek() operation: - Console devices in common/console.c - Firmware framework in common/firmware.c - JTAG driver in drivers/misc/jtag.c - UBI in drivers/mtd/ubi/barebox.c Of those four, first two are marked DEVFS_IS_CHARACTER_DEV and implement only .write() operation and the last two don't implement anything but .ioctl(). While there's probably no meaningful way to use lseek() against any of those devices, there doesn't seem to be any harm in allowing it either. Change devfs_lseek() to ignore absense of .lseek() callback and drop dev_lseek_default() and all references to it in the codebase. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 29 Jan 2019 Sascha Hauer committed on 29 Jan 2019
2019-01-15	7c2517c Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 15 Jan 2019
2019-01-04	b02a0ed Browse files » video: mtl017: fix driver name variable ... It look like a copy-paste bug that the twl_driver name was used. Rename to the more sensible mtl_driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sam Ravnborg authored on 31 Dec 2018 Sascha Hauer committed on 4 Jan 2019
2018-12-17	426ba13 Browse files » video: mtl017: Make sure errno is not used as a regulator pointer ... Since regulator_get() can return an errno via regulator pointer, we need to make sure we handle that case without passing bogus pointers around. Add code to convert mtl017->regulator to a dummy regulator if regulator_get() fails. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 13 Dec 2018 Sascha Hauer committed on 17 Dec 2018
2018-12-13	802bfc4 Browse files » backlight: rave-sp: init all brightness to default level ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 10 Dec 2018 Sascha Hauer committed on 13 Dec 2018
2018-12-07	05bc268 Browse files » Merge branch 'for-next/missing-prototypes' Sascha Hauer committed on 7 Dec 2018
2018-12-07	1d8bb9b Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 7 Dec 2018
2018-11-19	23c865d Browse files » video: ipuv3: use non-fractional clock for parallel display ... There is no need to keep DI and parent clock in sync for the parallel display interface, but some displays really don't like the jitter introduced by using a fractional clock. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Nov 2018 Sascha Hauer committed on 19 Nov 2018
	6b14328 Browse files » video: ipuv3: use closest fractional divider ... Currently the divider is always rounded down, which may lead to a rather big overshoot of the display clock. Try to match the clock better by rounding to closest. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Nov 2018 Sascha Hauer committed on 19 Nov 2018
	6694f0a Browse files » video/ssd1307fb: fix potential memory leak on error ... Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 16 Nov 2018 Sascha Hauer committed on 19 Nov 2018
2018-11-12	148437d Browse files » video: vpl: make locally used function static ... of_find_vpl() is only used locally, so make it static. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Nov 2018
2018-11-09	227426f Browse files » Merge branch 'for-next/net-switch-mv88e6xxx' Sascha Hauer committed on 9 Nov 2018
	9a8f531 Browse files » Merge branch 'for-next/missing-prototypes' Sascha Hauer committed on 9 Nov 2018
	b2cc1d1 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 9 Nov 2018
2018-11-06	393bba8 Browse files » ARM: at91: remove mach/io.h ... Remove at91_sys_read() and at91_sys_write() since these are no longer used. This makes mach/io.h empty so remove that aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
2018-10-19	d8fcbad Browse files » i2c: introduce device_i2c_driver() macro ... Add macro and dependency to avoid boilerplate code. Since now simple i2c drivers only have to include the i2c.h header and call the device_i2c_driver() macro to register a i2c device driver. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marco Felsch authored on 18 Oct 2018 Sascha Hauer committed on 19 Oct 2018
2018-10-18	0568376 Browse files » drivers: Introduce dev_set_name() ... Introduce dev_set_name() in order to hide implementation details of setting device's name so it'd be easier to change it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 16 Oct 2018 Sascha Hauer committed on 18 Oct 2018
2018-10-18	f78b9eb Browse files » video: imx-ipu-v3: Make locally used function static ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Oct 2018
2018-10-16	61850ba Browse files » rave-sp: backlight: Specify parent device correctly ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 15 Oct 2018 Sascha Hauer committed on 16 Oct 2018
2018-07-09	6af0422 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 9 Jul 2018
2018-06-21	782dd52 Browse files » video: Port RAVE SP backlight driver from Linux kernel ... This is a minimal port of a kernel commit 6552d3141064 ("backlight: Add RAVE SP backlight driver"). All of the changes were kept to a minimum and limited to impedance matching between Barebox/Linux driver API. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 19 Jun 2018 Sascha Hauer committed on 21 Jun 2018
2018-06-21	898ec20 Browse files » video: backlight: add slew time parameter ... Currently the backlight implementation stretches a brightness change over a period of 100ms. While this is a fine default for PWM backlights, a user might wish to change this slew time to meet other constraints or even completely disable it for some backlight devices. Add a parameter and provide the default value from the backlight device. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 20 Jun 2018 Sascha Hauer committed on 21 Jun 2018
2018-05-09	ff47ec5 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 9 May 2018
2018-04-25	d87e8e9 Browse files » video: tc358767: don't link AUX i2c adapter to parent OF node ... Otherwise the i2c core will try to populate the TC358767 child nodes as i2c devices, which is wrong. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 20 Apr 2018 Sascha Hauer committed on 25 Apr 2018
2018-04-09	2315670 Browse files » video: IPUv3-LDB: demote dual-channel message to info level ... Dual channel mode is a valid mode of operation, so there is no reason to print this at the warning level. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Apr 2018 Sascha Hauer committed on 9 Apr 2018
2018-04-09	395a0f5 Browse files » fb: reject enable request when framebuffer has no mode ... If no display is connected or the display modes are incompatible with the scanout hardware we might end up with a registered framebuffer with no modes. Trying to enable such a framebuffer will blow up with NULL ptr dereferences in various places, so just don't do it. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Apr 2018 Sascha Hauer committed on 9 Apr 2018
2018-04-06	a48f831 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 6 Apr 2018
2018-04-06	aa45c51 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 6 Apr 2018