net: cpsw: adopt to upstream device tree changes ...

Upstream device trees no longer have a "cpsw-phy-sel" property to find
the phy_sel register, instead they have a child device of the pinctrl
node compatible to "ti,am3352-phy-gmii-sel". Also the "rmii-clock-ext"
property is no longer global to the cpsw but instead can be selected
per slave. To adopt to these changes take the short way out for now
and find the new node by its compatible and hardcode the "rmii-clock-ext"
setting (which is set to true in am33xx-l4.dtsi and not overwritten
by any board).

This makes the cpsw driver work again. Tested on Beaglebone black
board.

Fixes: 1dc748b3b2 ("dts: update to v5.1-rc1")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/dma'

net: macb: dma_sync_* receive buffers ...

Receive buffers are properly synchronized only if Cadence is
GEM. Fix it for MACB as well.

Fixes: 86dc5259e25d (net: macb: no need for coherent memory for receive buffer)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: rtl8169: Do not zero out DMA coherent memory ...

Memory returned by dma_alloc_coherent() should already be zeroed
out, so there's no need to do this explicitly.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel ...

Use the potentially endianness-changing readl, writel and siblings
directly. They looks prettier and are the correct thing to do, as
even if the CPU is in big-endian mode, the peripherals are little-endian.

Unlike Linux, barebox readl,writel are the same Linux'
{readl,writel}_relaxed (they don't imply memory barriers)
and thus there shouldn't be any functional change.

Patch was generated by a mass search and replace. I looked it over,
adjust some whitespace and further verified by reviewing the output of

	git diff HEAD~1 --word-diff | \
		perl -pe 's/\[-(.*?)__raw_/{+$1/; s/-\]\{\+/+}{+/;' \
		-e 's/(\{\+.*?\+\})\1/__ALL_IS_WELL__/' | grep '+}{+'

which filters out the common case of lines where a single
__raw_{readT,writeT} had its __raw_ prefix stripped without any
further changes.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: replace '---help---' with 'help' in Kconfig files ...

In Linux, '---help---' was deprecated in favor of 'help', and
this is checked by the recent checkpatch.pl

See Linux commit 84af7a6

The number of '---help---' is gradually decreasing in Linux, but there
are still lots. However, '---help---' will be completely killed when
the time comes.

Fortunately, there are only some in Barebox. Replacing them is not hard.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fsl-fman: Sync rx buffers for device initially ...

The rx buffers must be given to the device initially to work properly.
Otherwise the first packets are corrupted.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/warnings'

Merge branch 'for-next/net'

treewide: Make locally used functions static ...

Many functions are only used locally but still are globally visible.
Make these function static. Avoids warnings generated with -Wmissing-prototypes

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Add Freescale FMan ethernet support ...

This adds ethernet support for the Freecale Layerscape SoCs. The
architecture in these SoCs is called "Data Path Acceleration
Architecture" (DPAA). It is comprised of:

- The Queue Manager (QMan)
- Buffer Manager (BMan)
- Frame Manager (FMan)
- Multirate Ethernet Media Access Controller (mEMAC)

The code is based on the corresponding U-Boot driver enriched with
device tree parsing and proper device driver support.

Tested on LS1046a, should work on other SoCs aswell with some minor
quirks. SerDes support has been removed for now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

realtek phy driver ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Add register access helper functions for phys ...

Linux has phy helpers to access paged registers and to modify phy
registers. Add them to barebox for upcoming realtek phy support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/nvme'

drivers: Make use of device_pci_driver() ...

Replace all of the generic PCI boilerplate with device_pci_driver().

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: cleanups ...

make local functions static and remove unused code

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

Merge branch 'for-next/lseek'

Merge branch 'for-next/imx'

Merge branch 'for-next/e1000'

net: ethernet: cpsw: cpsw-phy-sel: Use phandle for phy sel ...

With the usage of the interconnect target module hierarchy in device tree the
cpsw-phy-sel node moved to the system control module. An phandle has
been added instead to the device tree include.

Try to use the cpsw-phy-sel phandle first then fall back looking for the
cpsw-phy-sel child.

This patch is based on the upstream kernel patch:
18eb8aea7fb2 ("net: ethernet: cpsw-phy-sel: prefer phandle for phy sel")

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: micrel: backport ksz9031 125MHz ref-clk workaround ...

This patch backports linux commit e1b505a60366 ("net: phy: micrel: add
125MHz reference clock workaround").

8<--------------------- The original commit message -------------------

net: phy: micrel: add 125MHz reference clock workaround

The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be
used as reference clock for the MAC unit. The clock signal must meet the
RGMII requirements to ensure the correct data transmission between the
MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle
requirement if the phy is configured as slave. For a complete
describtion look at the errata sheets: DS80000691D or DS80000692D.

The errata sheet recommends to force the phy into master mode whenever
there is a 1000Base-T link-up as work around. Only set the
"micrel,force-master" property if you use the phy reference clock provided
by CLK125_NDO pin as MAC reference clock in your application.

Attenation, this workaround is only usable if the link partner can
be configured to slave mode for 1000Base-T.

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
[m.felsch@pengutronix.de: fix dt-binding documentation]
[m.felsch@pengutronix.de: use already existing result var for read/write]
[m.felsch@pengutronix.de: add error handling]
[m.felsch@pengutronix.de: add more comments]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
8<---------------------------------------------------------------------

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: skip fec_halt if the FEC wasn't started ...

If the FEC driver is enabled, but the ethernet device was never
opened due to booting from another source the wait for graceful
transmit stop will always fail. This introduces an unnecessary
boot delay and prints a distracting warning.

As there is no point in trying to shut down the FEC if it was
never started, just skip all of fec_halt in that case.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Do not hardcode TDBAH and RDBAH to 0 ...

While there currently no user of e1000 driver that places those rings
beyond 4GiB boundary, there's also no real reason not to initialize
those registers properly.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Improve RX buffer handling in e1000_fill_rx() ...

Drop explicit "volatile" specifier for struct e1000_rx_desc, "bla"
variable as well as explicit endiannes fix, by using little endian IO
accessors (readl, writel, etc.)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Consolidate next index calculation code ...

Consolidate next index calculation code into a helper function and
convert the code to make use of it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Remove pointer arithmetic from e1000_fill_rx() ...

Instead of relying on reles of pointer arithmetic (implicit
multiplication by the size of pointer type), change the code to
retreive address of an array elemet to clarify the intent.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Rename fill_rx() to e1000_fill_rx() ...

Rename fill_rx() to e1000_fill_rx() to match the naming convention of
other functions in the file.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/e1000: Make use of readl_poll_timeout() in e1000_transmit() ...

Simplify code of e1000_transmit() with readl_poll_timeout().

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>