eeprom: at24: Select NVMEM as a dependency ...

NVMEM subsystem is now a mandatory dependecy for EEPROM_AT24.

Fixes: 815e7140de ("eeprom: at24: Convert the driver to NVMEM")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX8: Fix piggydata loading ...

We are running at MX8MQ_ATF_BL33_BASE_ADDR now, so we can't use
this as a temporary buffer. Add 32MiB to that address and use this
instead. Also copy the piggydata to the place where we expect it
later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>

Merge branch 'for-next/stm32'

Merge branch 'for-next/mtd-gpmi-nand'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx8-hab'

ARM: i.MX: scb9328: refurbish board suport ...

- switch the i.MX1 based scb9328 board to device tree
- Remove scb9328_defconfig and enable scb9328 board support in
  imx_defconfig
- Remove old environment and switch to new default environment

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

eeprom: at24: Convert the driver to NVMEM ...

Convert AT24 driver to use NVMEM subsystem instead of explicitly
creating a dedicated cdev. This way it becomes possible to access the
contenst of EEPROM via NVMEM API, which could be usefull for things
like MAC-addresses and such.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

eeprom: at24: Drop at24_cdev_protect() ...

Instead of exposing a dedictaed .protect() callback, mimic the
behaviour of corresponding driver in Linux and adjust the value of WP
pin in .write() callback as necessary. This is done in order to
convert this driver to NVMEM subsytem.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nvmem: Parse partitions information ...

Add code to parse partition information that might be specified as a
part of the DT config.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nvmem: Use already existing dev pointer in nvmem_register_cdev() ...

There's already a struct device_d * pointer variable. Use it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nvmem: Use helper variable in nvmem_register_cdev() ...

Add struct cdev * helper variable to nvmem_register_cdev() in order to
avoid repeating &nvmem->cdev a bunch of times

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: i.MX iomux-v1: Add i.MX1 support ...

This adds the device tree compatible for the i.MX1 iomux.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: i.MX iomux-v1: Make base address initialization unnecessary ...

So far we have imx_gpio_mode() to configure a pinmux entry for the older
i.MX pinmuxes. For this to work imx_iomuxv1_init() must be called
beforehand to configure the base address. Simplify this by introducing
SoC specific variants of imx_gpio_mode() which also pass the base
address. This makes initialization of the base address unnecessary and
the functions usable for PBL. Consequently also compile the code for
PBL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

esdhc-pbl: add piggy load function ...

Add a function to load and copy the piggy data to the correct offset
expected by barebox in the RAM. This way the PBL can later verify the
piggydata before uncompressing and loading the main barebox.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

esdhc-pbl: extract header parsing from image start ...

Extract the header parsing code from esdc_start_image. The header
parsing function will be used by the piggy loading code added in the
next commit.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: HABv4: implement interface for i.MX8MQ ...

The HAB interface for i.MX8MQ only implements the retrieval of status
and events. The SoC status is retrieved using the TF-A SIP API found in
the downstream imx TF-A. After calling into the TF-A the passed data
structures need to be invalidated, since otherwise the cached zero value
is used.
Currently the TF-A report event call only supports FAILURE events.
Testing the TF-A with other event types resulted in a freeze in the
bootrom code, which was not investigated further.
We instead walk the memory containing the events and retrieve the events
ourselves. They are exposed using the same API.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: HABv4: ignore return for i.MX28/6 initcalls ...

Move the status call below the explanations and return Null.
No functional changes intended.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: Make ecc strength configurable via device tree ...

According to the binding doc the mxs NAND driver supports the
"nand-ecc-strength" and "nand-ecc-step-size" options. This adds support
for these options to the driver. The "nand-ecc-step-size" is not
really configurable, the only accepted value is 512 so this is merely
to sanity check that there's nothing specified that we can't yet
support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: Add function to parse device tree properties ...

This adds nand_of_parse_node() which can be used to parse generic
NAND device properties. Not very complete yet, but it's a start.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: inline only once used function ...

mxs_nand_ecc_size_in_bits() is used only once and is simple enough to
be inlined.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: pass mtd_info to mxs_nand_get_mark_offset() ...

struct mtd_info * contains everything mxs_nand_get_mark_offset() needs,
so pass this pointer rather than several integer arguments.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: change API between NAND driver and fcb code ...

The imx-bbu-nand-fcb update handler code calls into the NAND driver
to get the ecc strength and bad block marker position. Change the
API so that only a single function is necessary and not three functions.
Also in future the ecc strength will be configurable via device tree.
This means static parameters like page size / oob size are no longer
enough to calculate the ecc strength and so we store a pointer to our
mtd_info struct in a static global variable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: Make locally used variable static ...

fake_ecc_layout is only used in the mxs nand driver, so make it static.
Also it's not necessary to zero the structure.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: calculate ecc_strength only once ...

Instead of calculating the ecc strength multiple times with each page
read just do it once and store the result in chip->ecc.strength.

While at it also store the correct value in chip->ecc.bytes instead of
writing a bogus value into it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-mxs: consistently rename struct nand_chip * to "chip" ...

The struct nand_chip * is sometimes named "nand" and sometimes "chip".
For consistency name it "chip" throughout the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

crypto: caam - Always do rng selftest ...

The caam rng selftest is known to be broken in several i.MX
incarnations. To be on the safe side just unconditionally execute
it rather than trying to guess from HAB failure events if this is
necessary.
We can only do the selftest once per boot though, doing it a second time
yields an error:

rng_self_test: Job Error:
2101000.jr0@1000.of: 20001953: CCB: desc idx 25: RNG: Instantiate

so only do the test when rng is not yet initialized as tested with the
RDSTA_IFx status bits.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx6: define an enum for ldb mux inputs ...

For better readability should this code be reviewed
in future, replace the hardcoded input numbers
with an enum.

This is just a cosmetic change and was verified
to not affect clk-imx6.o.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK ...

Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk
tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to
enter the ldb_di_ipu_div divider. If the divider gets locked up, no
ldb_di[x]_clk is generated, and the LVDS display will hang when the
ipu_di_clk is sourced from ldb_di_clk.

To fix the problem, both the new and current parent of the ldb_di_clk
should be disabled before the switch. This patch ensures that correct
steps are followed when ldb_di_clk parent is switched in the beginning
of boot. The glitchy muxes are then registered as read-only. The clock
parent can be selected using the assigned-clocks and
assigned-clock-parents properties of the ccm device tree node:

        &clks {
                assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
                                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
                assigned-clock-parents = <&clks IMX6QDL_CLK_MMDC_CH1_AXI>,
                                         <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
        };

The issue is explained in detail in EB821 ("LDB Clock Switch Procedure &
i.MX6 Asynchronous Clock Switching Guidelines") [1].

[1] http://www.nxp.com/files/32bit/doc/eng_bulletin/EB821.pdf

Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Akshay Bhat <akshay.bhat@timesys.com>
Tested-by Joshua Clayton <stillcompiling@gmail.com>
Tested-by: Charles Kang <Charles.Kang@advantech.com.tw>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
[afa: reviewed for barebox]
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[afa: ported to barebox from Linux commit 5d283b0838]
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>