mtd: nand: Fix retrieving nand_chip from mtd_info ...

With 76b6f74c53 we begin embedding a struct mtd_info into struct
nand_chip. With this mtd_to_nand() must be changed accordingly.

Fixes: 76b6f74c53 ("mtd: nand: Embed struct mtd_info into struct nand_chip")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tftp'

Merge branch 'for-next/stm32'

Merge branch 'for-next/reset-source'

Merge branch 'for-next/qemu'

Merge branch 'for-next/omap'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/fsanitize'

Merge branch 'for-next/arm'

i2c: port Linux i2c_parse_fw_timings ...

Linux has a generic function for extracting i2c timings parameters from
device-associated firmware nodes. Port this function to barebox, but
have it only work on device tree nodes for now.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: make dev_add_param_string_fixed value parameter const ...

The function is so far unused and the parameter's only use is to be passed
as argument to dev_add_param_fixed which is const as well.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: iopoll: implement gpio_poll_timeout_us ...

Sometimes we need to wait for state change on a GPIO, provide a helper
for future code to do this.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: rave-sp: Emulate firmware/bootloader mode reporting on RDU2 ...

Add code to emulate firmware/bootloader mode reporting via
"general_status" field on RDU2. This is needed to correctly report if
RAVE SP is in bootloader of application mode during startup.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

oftree: expose reset_source device in device tree ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

elf: add 64 bits elf loading support ...

This patch add elf64 loading support to the elf loader. Since
elf32 and elf64 uses completely different types, to avoid copying all
the code and simply replace elf32 with elf64, use a macro which will
return the appropriate field for each type of header. This macro
generates getter for elf structures according to the class of the loaded
elf.
All direct elf struct dereference are then replaced by call to generated
functions. This allows to keep a common loader code even if types are
different.

Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: fix out-of-bounds read in dputc(/dev/*, ...) ...

Trying to output a single character via
	echo -a /dev/serial0-1
currently results in garbage output after the newline, because console.c's
fops_write discards the buffer length and passes the buffer to
(struct cdev)::puts which only handles NUL-terminated strings.

Fix this by amending (struct cdev)::puts with a new nbytes parameter,
which is correctly propagated. All this functions now return at most the
nbytes parameter they were passed in. This fixes __console_puts, which
used to count new lines twice in its return value.

Fixes: b4f55fcf35 ("console: expose consoles in devfs")
Cc: Bastian Krause <bst@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Kconfig: retire empty <asm/barebox.h> ...

With the latest changes, this file is empty on all archs. Drop it.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Kconfig: create Kconfig symbol for ARCH_HAS_DATA_ABORT_MASK ...

Other arch-specific features are exposed in Kconfig too, so do here
likewise.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Kconfig: create Kconfig symbol for ARCH_HAS_STACK_DUMP ...

Other arch-specific features are exposed in Kconfig too, so do here
likewise.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: mmc_extcsd: describe missing bit ...

The EXT_CSD_EXCEPTION_EVENTS_STATUS array entry is wrongly duplicated.
Replace the index by the correct field at byte offset 58[1].

[1]: See http://webshop.atlantiksysteme.de/temp/FLEXXONeMMC4.5pSLCSPECV1.2.pdf

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: fix mismatched header guards ...

The header checks for ATA_DISK_H, but defines a different ATA_DISK,
which would lead to compilation errors when included multiple times.
Fix this.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset_source: implement helper to set a device as reset source ...

This allows to remove some boilerplate from drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset_source: drop reset_source_set_instance() ...

The semantic of reset_source_set_instance() required a separate call to
reset_source_set() (or reset_source_set_priority()) and checked right
usage only using the type. Make the set of functions a bit easier to use
by dropping reset_source_set_instance() and instead introduce a function
that can set all relevant parameters (source, priority and instance) in
one go.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset_source: fix ordering of exported functions ...

Declare and implement getters first, then setters. This syncs the order
of functions in reset_source.c and reset_source.h.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset_source: use instance = -1 as default ...

As with platform device id (does someone still remember?) 0 might be a
valid id. So use -1 for "unknown" or "doesn't apply" instead of 0.

Also don't pass the instance to the device tree if negative. (This ends
up as 0xffffffff otherwise.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: peb: Add function to write file ...

This adds a function to the mtd peb API to write a file spanning
multiple blocks to a mtd device. Bad blocks are automatically skipped
and before anything is done we check if the image will fit into the
remaining space (honouring bad blocks).

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: gpmc: Add BCH16 support ...

This adds support for BCH16 ECC encoding. The support is mostly taken
from Linux-5.3-rc6. One major change is the different wrap mode used.
The Kernel uses wrapmode 1, which means "pass all data through the BCH
engine". Still the Kernel has to skip the OOB marker which is done by
reading all user data, then use NAND_CMD_RNDOUT to position right
behind the OOB marker and then read the ECC data. Instead of doing this
we use wrap mode 4 which allows us to bypass the OOB marker from the
BCH engine automatically. This explains

bch_wrapmode = 1, eccsize0 = 0, eccsize1 = 52 vs.
bch_wrapmode = 4, eccsize0 = 4, eccsize1 = 52

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: gpmc: Add support for ELM ...

This adds support for the ELM (Error Location Module) found on
not-too-old OMAP SoCs. The driver has been taken from Linux-5.3-rc6
with interrupt support removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: Embed struct mtd_info into struct nand_chip ...

Similar to what is done in the Kernel. In the Kernel we have a struct
nand_device embedded into struct nand_chip and the nand_device has an
mtd_info embedded into it. Until we have struct nand_device we embed
mtd_info directly into the nand_chip.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>