LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2019-10-14	3042dd2 Browse files » pinctrl: add gpio and pinctrl driver for sama5d2 PIO4 ... The sama5d2 features a GPIO and pin controller different than the one we support in barebox. The device tree bindings are different as well, so it makes sense to have a separate driver for it. Add the pin control and GPIO driver as well as some helpers usable from PBL, should we want to do pinmuxing that early. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 26 Sep 2019 Sascha Hauer committed on 14 Oct 2019
	6210321 Browse files » ARM: at91: provide at91_mux_pio3_pin for use in first stage ... Low level init code may wish the ability to configure pins, e.g. for low level debug UART. The pinctrl-at91 driver already exports an at91_mux_pio3_pin function, but that one is only usable after driver probe. Instead, provide an at91_mux_pio3_pin function, which can be used at all times. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 26 Sep 2019 Sascha Hauer committed on 14 Oct 2019
	94e2382 Browse files » ARM: i.MX: phytec-som-imx6: phycore: fix updating pmic regulators ... Currently the fixup code assumes that only one i2c bus is active. If we reuse the board code for other boards this isn't always true. Fix that by using of_find_i2c_adapter_by_node() to address both cases. Fixes: b6bebb7aca ("ARM: i.MX: phytec-som-imx6: phycore: Set BUCK mode to SYNC") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marco Felsch authored on 2 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	c2cf944 Browse files » MIPS: net: ag71xx/ar9331: partially sync network support with upstream ... Ethernet support for ar9331 is upstream now. So, drop every thing what is provided by upstream devicetree and rename compatible in the driver. barebox network driver will need more work to be upstream compliant. For example we should not request or touch the gmac register directly. Since currently it is not clear how this should be implemented, patch the upstream dts with reg-names = "ge0", "gmac". Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 1 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	9a198b0 Browse files » trivial: fix typo lenght -> length ... Generated by perl -p -i -e 's/lenghte?/length/' arch/arm/boards/chumby_falconwing/falconwing.c arch/arm/mach-samsung/mem-s3c64xx.c fs/ext4/ext_common.h lib/gui/lodepng.c include/jtag.h There is another instance in dts/Bindings/usb/s3c2410-usb.txt, this is fixed in Linux v5.3-rc1 so supposed to be fixed soon in barebox, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 17 Sep 2019 Sascha Hauer committed on 14 Oct 2019
	0140182 Browse files » Convert latin1 files to utf-8 ... The source files are parsed by $(make docs). Currently this is done using python2 (actually 'python' which is still python2 on most machines). When using python3 however (which has a stricter encoding handling) it is easier if all input is in utf-8 encoding. So convert the few remaining latin1 encoded files to utf-8. This only affects code comments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Uwe Kleine-König authored on 17 Sep 2019 Sascha Hauer committed on 14 Oct 2019
	9bbaa74 Browse files » state: provide dummy implementations for some functions when STATE is disabled ... This allows to simplify some callers as can be seen from the phytec-som-am335x/board.c change. (The check for state != NULL could be dropped already before.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 11 Sep 2019 Sascha Hauer committed on 14 Oct 2019
	84cf5cf Browse files » ARM: dts: imx6qdl: pfla02: Remove fec phy-supply ... There is no driver for the phyFLEX-i.MX 6 phy-supply regulator in the barebox. Use a dummy regulator instead by simply deleting the phy-supply property. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Riedmueller authored on 8 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	29cdf13 Browse files » ARM: dts: vf610-zii-scu4-aib: Add "i2c-mux-idle-disconnect" to I2C muxes ... Add "i2c-mux-idle-disconnect" to I2C muxes to prevent identical slaves from different segments from interfering with each other. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 8 Oct 2019 Sascha Hauer committed on 14 Oct 2019
	c5d38e9 Browse files » lds: Add and use RO_DATA_SECTION macro ... We have many different pointer arrays which we put into linker sections and each time there's one added we have to adjust all linker scripts. This adds a common RO_DATA_SECTION define and uses it for all architectures. This makes it easier to add a new linker array. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2019
	52e5c35 Browse files » X86: lds: remove unnecessary alignments ... We do not seem to need all these alignments in the rodata sections, so remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2019
	b680d2e Browse files » lds: create and use BAREBOX_PCI_FIXUP macro ... No need to repeat the pci fixup sections in each linker script. Add a define for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2019
	22bdecc Browse files » lds: Move start/end address variables into defines ... For the older section defines we specify the start and end addresses outside the macro which means we have to repeat them in each linker script. Make the start/end addresses part of the define to simplify things. While at it, add a BAREBOX_ prefix to the INITCALLS and EXITCALLS macros for consistency to the other defines. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Sascha Hauer committed on 14 Oct 2019
	99fe1fc Browse files » ppc: remove unused variables from linker scripts ... __initcall_entries and __exitcall_entries are unused. Remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2019
	4cb19a1 Browse files » barebox.lds: Remove unnecessary braces ... The BAREBOX_CLK_TABLE and BAREBOX_DTB macros are defines that do not take a parameter, so we can remove the braces. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2019
2019-10-02	5952390 Browse files » ARM: aarch64: add image markers to linker script ... The __image_start and __image_end marker are used by barebox to calculate the size of the barebox binary inside the RAM. Without the definitions barebox calculates its own size to zero, which works until a certain size is exceeded, than the PBL will place the binary lower into memory than the calculation inside barebox. Fix this by adding the appropriate image markers to the linker script. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rouven Czerwinski authored on 1 Oct 2019 Sascha Hauer committed on 2 Oct 2019
	6c4ae8c Browse files » ARM: add common i.MX23 defconfig file ... Merge the defconfigs for the i.MX23 boards into a common imx23_defconfig. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	3e01b75 Browse files » ARM: add common i.MX28 defconfig file ... Merge the defconfigs for the i.MX28 boards into a common imx28_defconfig. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	736446b Browse files » ARM: mxs: Allow to compile all boards for a SoC together ... All boards in mach-mxs support multi image, so we no longer have to make the board type a choice. Let the user compile all boards for a SoC together. We cannot compile i.MX23 together with i.MX28 though, there are still many conflicting defines which use the IMX_ namespace which are really SoC specific. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	4b343a3 Browse files » ARM: mxs: Move HAVE_PBL_MULTI_IMAGES up to ARCH ... Now that all boards in mach-mxs select HAVE_PBL_MULTI_IMAGES we can move it up to ARCH_MXS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	6bc436b Browse files » ARM: mxs: chumby: Switch to multi image support ... Build the Chumby as multi image. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	30fe171 Browse files » ARM: mxs: imx23-evk: Switch to multi image support ... Build the i.MX23 EVK as multi image. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	8cec514 Browse files » ARM: mxs: cfa10036: Switch to multi image support ... Build the cfa10036 as multi image. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	1149c75 Browse files » ARM: Freescale i.MX23 evk: Check machine type in initcalls ... Check for the right machine type in initcalls before executing them to make the board multi image safe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	e82c880 Browse files » ARM: i.MX23 Chumby: Check machine type in initcalls ... Check for the right machine type in initcalls before executing them to make the board multi image safe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	e8fea1d Browse files » ARM: Crytalfonts cfa10036: Check machine type in initcalls ... Check for the right machine type in initcalls before executing them to make the board multi image safe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	e78de63 Browse files » ARM: i.MX23 olinuxino: Check machine type in initcalls ... Check for the right machine type in initcalls before executing them to make the board multi image safe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	fb6c774 Browse files » ARM: Freescale mx28evk: Check machine type in initcalls ... Check for the right machine type in initcalls before executing them to make the board multi image safe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	371cfb7 Browse files » ARM: duckbill: Check machine type in initcalls ... Check for the right machine type in initcalls before executing them to make the board multi image safe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019
	eefdd61 Browse files » ARM: tx28: Make locally used function static ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2019