LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / watchdog

2019-10-14	d1cd3da Browse files » watchdog: add support for Fintek F718xx and, F818xx Super I/O ... This is an adaptation of the Linux v5.3 f71808e_wdt driver for the watchdog component of the Fintek Super I/O chips. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 11 Oct 2019 Sascha Hauer committed on 14 Oct 2019
2019-09-12	45d273f Browse files » Merge branch 'for-next/stm32' Sascha Hauer committed on 12 Sep 2019
2019-09-09	2a814c1 Browse files » watchdog: add support for STPMIC1 integrated watchdog ... The driver adds support for the PMIC's watchdog, reset, poweroff and reset reason query capabilities. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 9 Sep 2019 Sascha Hauer committed on 9 Sep 2019
2019-08-28	9354460 Browse files » reset_source: drop reset_source_set_instance() ... The semantic of reset_source_set_instance() required a separate call to reset_source_set() (or reset_source_set_priority()) and checked right usage only using the type. Make the set of functions a bit easier to use by dropping reset_source_set_instance() and instead introduce a function that can set all relevant parameters (source, priority and instance) in one go. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Aug 2019 Sascha Hauer committed on 28 Aug 2019
2019-07-11	9f30aa3 Browse files » watchdog: stm32_iwdg: remove left-over comment ... The reset reason part of the code is based on the i.MX6's and duplicated a comment from there, which isn't applicable to the STM32. Delete it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 10 Jul 2019 Sascha Hauer committed on 11 Jul 2019
2019-06-19	2714dad Browse files » watchdog: add stm32 watchdog and reset driver ... The driver supports setting watchdog timeout, system reset and querying reset reason. Disabling watchdog isn't possible in hardware, thus users should either only enable it before boot or have the poller take care of feeding it. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 17 Jun 2019 Sascha Hauer committed on 19 Jun 2019
2019-03-13	4d1456e Browse files » watchdog: imx: Add big endian register access support ... Layerscape SoCs feature the same watchdog as the i.MX SoCs, but in big endian mode. Add support for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Mar 2019
2019-03-13	d73e0cd Browse files » watchdog: imx: Add register accessor functions ... In preparation of adding big endian support in the next step. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Mar 2019
2019-03-07	8f397a4 Browse files » Merge branch 'for-next/rpi' Sascha Hauer committed on 7 Mar 2019
2019-03-07	63557eb Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 7 Mar 2019
2019-02-27	614e661 Browse files » watchdog: fix WATCHDOG_POLLER menuconfig ... make it properly represented by menuconfig Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 15 Feb 2019 Sascha Hauer committed on 27 Feb 2019
2019-02-18	73f2bc1 Browse files » watchdog: bcm2835: set timeout_max. ... BCM2835 watchdog timeout can be set to maximum 15 seconds (0xffffff >> 16). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tomaz Solc authored on 14 Feb 2019 Sascha Hauer committed on 18 Feb 2019
2019-02-18	520075d Browse files » watchdog: add (U)EFI driver ... This driver is using SetWatchdogTimer() UEFI interface and was tested on iBASE MI991AF Mini-ITX motherboard. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 15 Feb 2019 Sascha Hauer committed on 18 Feb 2019
2018-11-16	475eac0 Browse files » ARM: i.MX: When SRSR shows wdog then lookup reset source in wdog ... On i.MX6 when the watchdog has resetted the system then the SRSR register correctly shows that the watchdog has resetted the system. This is not the desired result though, a "reset" in barebox or "reboot" in Linux should result in "RST" as reset source. So instead of making the SRSR register value overwrite the reset source read from the watchdog registers, interpret the SRSR value corresponding to watchdog reset as "lookup details in the watchdog registers". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Sascha Hauer committed on 16 Nov 2018
2018-10-18	0568376 Browse files » drivers: Introduce dev_set_name() ... Introduce dev_set_name() in order to hide implementation details of setting device's name so it'd be easier to change it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 16 Oct 2018 Sascha Hauer committed on 18 Oct 2018
2018-06-26	edb4379 Browse files » watchdog: rave-sp-wdt: Explicitly access EEPROM for bootsource ... RAVE SP firmware versions found on RDU2 provide decicated bootsource manipulation commands, which, under the hood, are just thin wrappers around write/read to a particular location in EEPROM. Unfortunately, RAVE SP firmware found on RDU1, does not provide any dedicated bootsource commands and its users are expected to access EEPROM directly. In order to avoid having separate code paths for handling those two cases, convert the code to access EEPROM directly via NVMEM API. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 24 Jun 2018 Sascha Hauer committed on 26 Jun 2018
2018-06-26	a880a7f Browse files » watchdog: rave-sp-wdt: Remove bogus leftover code ... This code should've been removed when the driver was rebased against latest watchdog plumbing in Barebox. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 24 Jun 2018 Sascha Hauer committed on 26 Jun 2018
2018-05-09	ff47ec5 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 9 May 2018
2018-05-04	d472b86 Browse files » watchdog: Port RAVE SP watchdog driver from Linux kernel ... Port RAVE SP watchdog driver from Linux kernel Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 2 May 2018 Sascha Hauer committed on 4 May 2018
2018-04-25	e210349 Browse files » watchdog: omap: set hwdev before call watchdog_register ... Since watchdog_register access to hwdev (see commit `65a6443`) hwdev has to be initiate/set before calling watchdog_register. Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andreas Schmidt authored on 22 Apr 2018 Sascha Hauer committed on 25 Apr 2018
2018-04-25	361da8b Browse files » watchdog: core: check hwdev before use it ... Avoid null pointer access, if hwdev was not set before call watchdog_register. Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andreas Schmidt authored on 22 Apr 2018 Sascha Hauer committed on 25 Apr 2018
2018-03-26	098e703 Browse files » watchdog: add watchdog poller ... In some cases it is practical to supervise as much as possible of the barebox execution with a watchdog (or multiple watchdogs). This patch provides an async poller for watchdog core framework which can be enabled by the user and stores this configuration to nv. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 19 Mar 2018 Sascha Hauer committed on 26 Mar 2018
2018-03-23	10e3166 Browse files » watchdog: provide timeout_cur value ... timeout_cur will be used for watchdog poller. Provided values should be good enough for most users and still can be changed for separate projects and fit to needed requirements. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 13 Mar 2018 Sascha Hauer committed on 23 Mar 2018
	e22f2aa Browse files » watchdog: set some reasonable timeout_max value if no other is available ... Some drivers do not provide timeout_max value. Using some value is probably better then setting timeout_max to 0. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 13 Mar 2018 Sascha Hauer committed on 23 Mar 2018
	dc16077 Browse files » watchdog: move max timeout test in to wd_core ... this also will be needed for watchdog poller as well Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 13 Mar 2018 Sascha Hauer committed on 23 Mar 2018
	65a6443 Browse files » watchdog: register watchdog virtual device with short name wdog ... the watchdog hwdev is usually named with devicetree schema which is not practical for CLI. On device registration "wdog" will be extended with some index number extracted from devicetree (if awailable) or automatically assigned first available number. End result will be "wdog0" .. etc. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 13 Mar 2018 Sascha Hauer committed on 23 Mar 2018
2018-03-22	1ef7cd0 Browse files » watchdog: rename dev to hwdev ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Mar 2018
2018-02-09	e7158f2 Browse files » watchdog: implement bcm2835 watchdog ... Move out of architecture code and add some real watchdog functionality. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Feb 2018 Sascha Hauer committed on 9 Feb 2018
2018-01-05	b58e162 Browse files » watchdog: add ar9344-wdt driver ... This driver was developed and tested on QCA AR9344 WiSoC but it may work on most known Atheros/QCA WiSoCs. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 22 Nov 2017 Sascha Hauer committed on 5 Jan 2018
2017-06-14	442f634 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 14 Jun 2017