Merge branch 'for-next/watchdog'

Merge branch 'for-next/stm32'

mfd: da9063: don't try to register gpiochip when GPIOLIB isn't built ...

Fixes: feee4b638048 (gpio: add DA9062 MFD gpio support)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: superio: add missing semicolon after EXPORT_SYMBOL ...

Fixes: efd517c35f12 (mfd: add basic Super I/O chip helpers)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9053: fix typo in variable name ...

Fixes: 06928c7d1758 (mfd: da9053: use new reset_source_set_device)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: stpmic1: use register define from header ...

A previous commit has copied over the upstream <linux/mfd/stpmic1.h>
header. Use it instead of replicating register definitions in the
MFD and watchdog cell driver. No functional change.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: always populate watchdog priority from device tree if possible ...

So far, only the da9063 and da9053 have made use of the optional barebox
watchdog-priority binding. Move it into the core, so other device
drivers automatically have their watchdog-priority property parsed as
well. This patch doesn't introduce any functional changes for upstream
boards.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/watchdog'

Merge branch 'for-next/stm32'

mfd: stpmic1: use dev_get_regmap instead of priv member ...

When we call regmap_init, the regmap is associated with the device
supplied and can be queried with dev_get_regmap. This is more natural
than expecting cell drivers to cast dev->parent->priv. Do it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9063: fix watchdog ping execution ...

The watchdog resets the system if the watchdog gets pinged to fast.
Between each watchdog ping must be a pause of at least 200ms. This
commit fixes that by rejecting two fast requests.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9063: fix TWDSCALE debug message ...

The TWDSCALE is the found scale + 1 as described in the datasheets
for the DA9062/3 devices. The driver logic is correct just the debug
message is wrong.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: superio: use strerrorp helper instead of open-coding ...

Apparently, we have a helper for strerror(-PTR_ERR(regmap)). Use it.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: superio: add base SMSC MFD driver ...

The SMSC FDC37C93xAPM is the Super I/O chip on the Dell Latitude 7490.
This adds device detection for it and its siblings, so device drivers
can be written against it or init scripts can use its regmap interface.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: superio: add Fintek MFD driver ...

Super I/O chips require a password to unlock access to the I/O ports.
Add a driver that pokes the password and registers the appropriate GPIO
and Watchdog devices as well as a regmap reflecting the Super I/O chip.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: add basic Super I/O chip helpers ...

Super I/O chips are ICs common to x86 that are used for interfacing
to low-bandwidth peripherals. They often contain serial ports, watchdog
timers and hardware monitoring units.

They are usually addressable via one of two I/O port pairs, either
0x2e-0x2f or 0x4e-0x4f, but they don't typically respond to reads from
their range unless a device-specific 'password' has been poked in.
After this is done, they are read and written in the same manner however.

On Linux, these devices aren't subject to any device/driver model.
Each driver for some function (e.g. watchdog or GPIO) duplicates the
device probe in the module_init and board-specific configuration
is handled via module parameters.

Lets do it a bit fancier in barebox and add a helper to register chips
and a regmap for the control and configuration registers as well as a
helper to register child devices for each function contained within the
Super I/O chip.
Board-specific configuration, e.g. which pin to use as a watchdog reset,
can then be realized using barebox device-specific parameters.

The regmap will be more of a debugging aid, however.
For ease of porting from Linux, it's expected that access to the
I/O ports won't happen via the regmap. For this reason, the new
<superio.h> header offers functions to read/write these chips' registers
as well.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: add DA9062 MFD gpio support ...

The DA9062 PMIC is a mfd device which have 5 gpios. These can be
configured to work as input/output or to have an alternate function.
This commit adds the support to configure the gpios as input or output.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9063: add support to populate subdevs ...

The upstream dt-bindings abstracts the DA9063/2 PMIC MFD by multiple
of-subnodes and the linux-mfd core creates platform-devices for each
node. Due to the lack of a mfd fw we need to add the platform-devices by
our own to reuse the upstream bindings.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/stm32'

Merge branch 'for-next/reset-source'

mfd: add support for STPMIC1 ...

The PMIC is addressable over I2C and, besides power management,
integrates a watchdog, a user power on key handling and 64 bit of
non-volatile memory.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: rave-sp: Emulate firmware/bootloader mode reporting on RDU2 ...

Add code to emulate firmware/bootloader mode reporting via
"general_status" field on RDU2. This is needed to correctly report if
RAVE SP is in bootloader of application mode during startup.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9063: use new reset_source_set_device() ...

Make use of the just introduced reset_source_set_device() to save some
boilerplate.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9053: use new reset_source_set_device() ...

Make use of the just introduced reset_source_set_device() to save some
boilerplate.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: syscon: add syscon_regmap_lookup_by_phandle() ...

This function is handy when syscon is passed as phandle to device_node
property.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: Add missing includes ...

Many files in the tree implement functions, but do not include the
header files which provide the prototypes for these functions. This
means conflicting prototypes remain undetected. Add the missing
includes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

regmap: Implement syscon_regmap_lookup_by_compatible() ...

Implement syscon_regmap_lookup_by_compatible() to simplify porting kernel code.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devfs: Drop dev_lseek_default() ...

Only the following cdevs do not declare an .lseek() operation:

  - Console devices in common/console.c
  - Firmware framework in common/firmware.c
  - JTAG driver in drivers/misc/jtag.c
  - UBI in drivers/mtd/ubi/barebox.c

Of those four, first two are marked DEVFS_IS_CHARACTER_DEV and
implement only .write() operation and the last two don't implement
anything but .ioctl(). While there's probably no meaningful way to use
lseek() against any of those devices, there doesn't seem to be any
harm in allowing it either.

Change devfs_lseek() to ignore absense of .lseek() callback and drop
dev_lseek_default() and all references to it in the codebase.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

mfd: syscon: Switch to using %pa to print memory addresses ...

Switch to using %pa to print memory addresses in order to be able to
support both 64 and 32 bit builds.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>