{ "name": "cellular", "config": { "present": { "help": "MBED_CONF_CELLULAR_PRESENT will be defined if cellular is used", "value": 1 }, "use-apn-lookup": { "help": "Use APN database lookup", "value": false }, "use-sms": { "help": "Enable or disable SMS functionality in Cellular stack.", "value": false }, "random_max_start_delay": { "help": "Maximum random delay value used in start-up sequence in seconds", "value": 0 }, "debug-at": { "help": "Enable AT debug prints. Requires also mbed-trace to be enabled. Note! This can have impact on UART performance and might need increasing of drivers.uart-serial-rxbuf-size", "value": false }, "radio-access-technology": { "help": "Radio access technology to use. Value in integer: GSM=0, GSM_COMPACT=1, UTRAN=2, EGPRS=3, HSDPA=4, HSUPA=5, HSDPA_HSUPA=6, E_UTRAN=7, CATM1=8 ,NB1=9", "value": null }, "control-plane-opt": { "help": "Enables control plane CIoT EPS optimization", "value": false }, "offload-dns-queries" : { "help": "Use modem IP stack for DNS queries, null or numeric simultaneous queries", "value": null }, "clear-on-connect" : { "help": "Clear modem to a known default state on connect() before SIM pin is entered, null to disable", "value": null }, "max-cp-data-recv-len" : { "help": "Max length of the buffer storing data received over control plane", "value": 1358 }, "plmn-fallback-auto" : { "help": "If manual PLMN is selected, use mode 4 manual/automatic in AT+COPS to try automatic mode if manual selection fails. Set to null to disable", "value": null }, "at-handler-buffer-size" : { "help": "Size of the AT handler buffer", "value": 32 } } }