/* * Copyright (c) 2020, Nuvoton Technology Corporation * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesCommon.h" #ifdef __cplusplus extern "C" { #endif typedef enum { // Not connected NC = (int)0xFFFFFFFF, // Generic naming PA_0 = NU_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15, PB_0 = NU_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15, PC_0 = NU_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14, PD_0 = NU_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14, PE_0 = NU_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15, PF_0 = NU_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11, PG_0 = NU_PINNAME(6, 0), PG_1, PG_2, PG_3, PG_4, PG_5, PG_6, PG_7, PG_8, PG_9, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15, PH_0 = NU_PINNAME(7, 0), PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11, // Arduino UNO naming A0 = PB_6, A1 = PB_7, A2 = PB_8, A3 = PB_9, A4 = PB_0, A5 = PB_1, D0 = PB_2, D1 = PB_3, D2 = PC_9, D3 = PC_10, D4 = PC_11, D5 = PC_12, D6 = PE_4, D7 = PE_5, D8 = PA_5, D9 = PA_4, D10 = PA_3, D11 = PA_0, D12 = PA_1, D13 = PA_2, D14 = PG_1, D15 = PG_0, // Note: board-specific // UART naming #if defined(MBED_CONF_TARGET_USB_UART_TX) USBTX = MBED_CONF_TARGET_USB_UART_TX, #else USBTX = NC, #endif #if defined(MBED_CONF_TARGET_USB_UART_RX) USBRX = MBED_CONF_TARGET_USB_UART_RX, #else USBRX = NC, #endif #if defined(MBED_CONF_TARGET_STDIO_UART_TX) STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX, #else STDIO_UART_TX = USBTX, #endif #if defined(MBED_CONF_TARGET_STDIO_UART_RX) STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX, #else STDIO_UART_RX = USBRX, #endif SERIAL_TX = D10, SERIAL_RX = D13, // I2C naming I2C_SCL = D15, I2C_SDA = D14, // LED naming LED_RED = PH_0, LED_YELLOW = PH_1, LED_GREEN = PH_2, LED1 = LED_RED, LED2 = LED_YELLOW, LED3 = LED_GREEN, LED4 = LED1, // No real LED. Just for passing ATS. // Button naming SW2 = PF_11, SW3 = PG_5, BUTTON1 = SW2, BUTTON2 = SW3, // Force PinName to 32-bit required by NU_PINNAME_BIND(...) FORCE_ENUM_PINNAME_32BIT = 0x7FFFFFFF, } PinName; #ifdef __cplusplus } #endif #endif // MBED_PINNAMES_H