GitBucket
Newer
/**
* \file
*
* \brief Component description for SUPC
*
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _SAML21_SUPC_COMPONENT_
#define _SAML21_SUPC_COMPONENT_
/* ========================================================================== */
/** SOFTWARE API DEFINITION FOR SUPC */
/* ========================================================================== */
/** \addtogroup SAML21_SUPC Supply Controller */
/*@{*/
#define SUPC_U2117
#define REV_SUPC 0x110
/* -------- SUPC_INTENCLR : (SUPC Offset: 0x00) (R/W 32) Interrupt Enable Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t BOD33RDY:1; /*!< bit: 0 BOD33 Ready */
uint32_t BOD33DET:1; /*!< bit: 1 BOD33 Detection */
uint32_t B33SRDY:1; /*!< bit: 2 BOD33 Synchronization Ready */
uint32_t BOD12RDY:1; /*!< bit: 3 BOD12 Ready */
uint32_t BOD12DET:1; /*!< bit: 4 BOD12 Detection */
uint32_t B12SRDY:1; /*!< bit: 5 BOD12 Synchronization Ready */
uint32_t :2; /*!< bit: 6.. 7 Reserved */
uint32_t VREGRDY:1; /*!< bit: 8 Voltage Regulator Ready */
uint32_t APWSRDY:1; /*!< bit: 9 Automatic Power Switch Ready */
uint32_t VCORERDY:1; /*!< bit: 10 VDDCORE Ready */
uint32_t :21; /*!< bit: 11..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_INTENCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_INTENCLR_OFFSET 0x00 /**< \brief (SUPC_INTENCLR offset) Interrupt Enable Clear */
#define SUPC_INTENCLR_RESETVALUE 0x00000000ul /**< \brief (SUPC_INTENCLR reset_value) Interrupt Enable Clear */
#define SUPC_INTENCLR_BOD33RDY_Pos 0 /**< \brief (SUPC_INTENCLR) BOD33 Ready */
#define SUPC_INTENCLR_BOD33RDY (0x1ul << SUPC_INTENCLR_BOD33RDY_Pos)
#define SUPC_INTENCLR_BOD33DET_Pos 1 /**< \brief (SUPC_INTENCLR) BOD33 Detection */
#define SUPC_INTENCLR_BOD33DET (0x1ul << SUPC_INTENCLR_BOD33DET_Pos)
#define SUPC_INTENCLR_B33SRDY_Pos 2 /**< \brief (SUPC_INTENCLR) BOD33 Synchronization Ready */
#define SUPC_INTENCLR_B33SRDY (0x1ul << SUPC_INTENCLR_B33SRDY_Pos)
#define SUPC_INTENCLR_BOD12RDY_Pos 3 /**< \brief (SUPC_INTENCLR) BOD12 Ready */
#define SUPC_INTENCLR_BOD12RDY (0x1ul << SUPC_INTENCLR_BOD12RDY_Pos)
#define SUPC_INTENCLR_BOD12DET_Pos 4 /**< \brief (SUPC_INTENCLR) BOD12 Detection */
#define SUPC_INTENCLR_BOD12DET (0x1ul << SUPC_INTENCLR_BOD12DET_Pos)
#define SUPC_INTENCLR_B12SRDY_Pos 5 /**< \brief (SUPC_INTENCLR) BOD12 Synchronization Ready */
#define SUPC_INTENCLR_B12SRDY (0x1ul << SUPC_INTENCLR_B12SRDY_Pos)
#define SUPC_INTENCLR_VREGRDY_Pos 8 /**< \brief (SUPC_INTENCLR) Voltage Regulator Ready */
#define SUPC_INTENCLR_VREGRDY (0x1ul << SUPC_INTENCLR_VREGRDY_Pos)
#define SUPC_INTENCLR_APWSRDY_Pos 9 /**< \brief (SUPC_INTENCLR) Automatic Power Switch Ready */
#define SUPC_INTENCLR_APWSRDY (0x1ul << SUPC_INTENCLR_APWSRDY_Pos)
#define SUPC_INTENCLR_VCORERDY_Pos 10 /**< \brief (SUPC_INTENCLR) VDDCORE Ready */
#define SUPC_INTENCLR_VCORERDY (0x1ul << SUPC_INTENCLR_VCORERDY_Pos)
#define SUPC_INTENCLR_MASK 0x0000073Ful /**< \brief (SUPC_INTENCLR) MASK Register */
/* -------- SUPC_INTENSET : (SUPC Offset: 0x04) (R/W 32) Interrupt Enable Set -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t BOD33RDY:1; /*!< bit: 0 BOD33 Ready */
uint32_t BOD33DET:1; /*!< bit: 1 BOD33 Detection */
uint32_t B33SRDY:1; /*!< bit: 2 BOD33 Synchronization Ready */
uint32_t BOD12RDY:1; /*!< bit: 3 BOD12 Ready */
uint32_t BOD12DET:1; /*!< bit: 4 BOD12 Detection */
uint32_t B12SRDY:1; /*!< bit: 5 BOD12 Synchronization Ready */
uint32_t :2; /*!< bit: 6.. 7 Reserved */
uint32_t VREGRDY:1; /*!< bit: 8 Voltage Regulator Ready */
uint32_t APWSRDY:1; /*!< bit: 9 Automatic Power Switch Ready */
uint32_t VCORERDY:1; /*!< bit: 10 VDDCORE Ready */
uint32_t :21; /*!< bit: 11..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_INTENSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_INTENSET_OFFSET 0x04 /**< \brief (SUPC_INTENSET offset) Interrupt Enable Set */
#define SUPC_INTENSET_RESETVALUE 0x00000000ul /**< \brief (SUPC_INTENSET reset_value) Interrupt Enable Set */
#define SUPC_INTENSET_BOD33RDY_Pos 0 /**< \brief (SUPC_INTENSET) BOD33 Ready */
#define SUPC_INTENSET_BOD33RDY (0x1ul << SUPC_INTENSET_BOD33RDY_Pos)
#define SUPC_INTENSET_BOD33DET_Pos 1 /**< \brief (SUPC_INTENSET) BOD33 Detection */
#define SUPC_INTENSET_BOD33DET (0x1ul << SUPC_INTENSET_BOD33DET_Pos)
#define SUPC_INTENSET_B33SRDY_Pos 2 /**< \brief (SUPC_INTENSET) BOD33 Synchronization Ready */
#define SUPC_INTENSET_B33SRDY (0x1ul << SUPC_INTENSET_B33SRDY_Pos)
#define SUPC_INTENSET_BOD12RDY_Pos 3 /**< \brief (SUPC_INTENSET) BOD12 Ready */
#define SUPC_INTENSET_BOD12RDY (0x1ul << SUPC_INTENSET_BOD12RDY_Pos)
#define SUPC_INTENSET_BOD12DET_Pos 4 /**< \brief (SUPC_INTENSET) BOD12 Detection */
#define SUPC_INTENSET_BOD12DET (0x1ul << SUPC_INTENSET_BOD12DET_Pos)
#define SUPC_INTENSET_B12SRDY_Pos 5 /**< \brief (SUPC_INTENSET) BOD12 Synchronization Ready */
#define SUPC_INTENSET_B12SRDY (0x1ul << SUPC_INTENSET_B12SRDY_Pos)
#define SUPC_INTENSET_VREGRDY_Pos 8 /**< \brief (SUPC_INTENSET) Voltage Regulator Ready */
#define SUPC_INTENSET_VREGRDY (0x1ul << SUPC_INTENSET_VREGRDY_Pos)
#define SUPC_INTENSET_APWSRDY_Pos 9 /**< \brief (SUPC_INTENSET) Automatic Power Switch Ready */
#define SUPC_INTENSET_APWSRDY (0x1ul << SUPC_INTENSET_APWSRDY_Pos)
#define SUPC_INTENSET_VCORERDY_Pos 10 /**< \brief (SUPC_INTENSET) VDDCORE Ready */
#define SUPC_INTENSET_VCORERDY (0x1ul << SUPC_INTENSET_VCORERDY_Pos)
#define SUPC_INTENSET_MASK 0x0000073Ful /**< \brief (SUPC_INTENSET) MASK Register */
/* -------- SUPC_INTFLAG : (SUPC Offset: 0x08) (R/W 32) Interrupt Flag Status and Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t BOD33RDY:1; /*!< bit: 0 BOD33 Ready */
uint32_t BOD33DET:1; /*!< bit: 1 BOD33 Detection */
uint32_t B33SRDY:1; /*!< bit: 2 BOD33 Synchronization Ready */
uint32_t BOD12RDY:1; /*!< bit: 3 BOD12 Ready */
uint32_t BOD12DET:1; /*!< bit: 4 BOD12 Detection */
uint32_t B12SRDY:1; /*!< bit: 5 BOD12 Synchronization Ready */
uint32_t :2; /*!< bit: 6.. 7 Reserved */
uint32_t VREGRDY:1; /*!< bit: 8 Voltage Regulator Ready */
uint32_t APWSRDY:1; /*!< bit: 9 Automatic Power Switch Ready */
uint32_t VCORERDY:1; /*!< bit: 10 VDDCORE Ready */
uint32_t :21; /*!< bit: 11..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_INTFLAG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_INTFLAG_OFFSET 0x08 /**< \brief (SUPC_INTFLAG offset) Interrupt Flag Status and Clear */
#define SUPC_INTFLAG_RESETVALUE 0x00000000ul /**< \brief (SUPC_INTFLAG reset_value) Interrupt Flag Status and Clear */
#define SUPC_INTFLAG_BOD33RDY_Pos 0 /**< \brief (SUPC_INTFLAG) BOD33 Ready */
#define SUPC_INTFLAG_BOD33RDY (0x1ul << SUPC_INTFLAG_BOD33RDY_Pos)
#define SUPC_INTFLAG_BOD33DET_Pos 1 /**< \brief (SUPC_INTFLAG) BOD33 Detection */
#define SUPC_INTFLAG_BOD33DET (0x1ul << SUPC_INTFLAG_BOD33DET_Pos)
#define SUPC_INTFLAG_B33SRDY_Pos 2 /**< \brief (SUPC_INTFLAG) BOD33 Synchronization Ready */
#define SUPC_INTFLAG_B33SRDY (0x1ul << SUPC_INTFLAG_B33SRDY_Pos)
#define SUPC_INTFLAG_BOD12RDY_Pos 3 /**< \brief (SUPC_INTFLAG) BOD12 Ready */
#define SUPC_INTFLAG_BOD12RDY (0x1ul << SUPC_INTFLAG_BOD12RDY_Pos)
#define SUPC_INTFLAG_BOD12DET_Pos 4 /**< \brief (SUPC_INTFLAG) BOD12 Detection */
#define SUPC_INTFLAG_BOD12DET (0x1ul << SUPC_INTFLAG_BOD12DET_Pos)
#define SUPC_INTFLAG_B12SRDY_Pos 5 /**< \brief (SUPC_INTFLAG) BOD12 Synchronization Ready */
#define SUPC_INTFLAG_B12SRDY (0x1ul << SUPC_INTFLAG_B12SRDY_Pos)
#define SUPC_INTFLAG_VREGRDY_Pos 8 /**< \brief (SUPC_INTFLAG) Voltage Regulator Ready */
#define SUPC_INTFLAG_VREGRDY (0x1ul << SUPC_INTFLAG_VREGRDY_Pos)
#define SUPC_INTFLAG_APWSRDY_Pos 9 /**< \brief (SUPC_INTFLAG) Automatic Power Switch Ready */
#define SUPC_INTFLAG_APWSRDY (0x1ul << SUPC_INTFLAG_APWSRDY_Pos)
#define SUPC_INTFLAG_VCORERDY_Pos 10 /**< \brief (SUPC_INTFLAG) VDDCORE Ready */
#define SUPC_INTFLAG_VCORERDY (0x1ul << SUPC_INTFLAG_VCORERDY_Pos)
#define SUPC_INTFLAG_MASK 0x0000073Ful /**< \brief (SUPC_INTFLAG) MASK Register */
/* -------- SUPC_STATUS : (SUPC Offset: 0x0C) (R/ 32) Power and Clocks Status -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t BOD33RDY:1; /*!< bit: 0 BOD33 Ready */
uint32_t BOD33DET:1; /*!< bit: 1 BOD33 Detection */
uint32_t B33SRDY:1; /*!< bit: 2 BOD33 Synchronization Ready */
uint32_t BOD12RDY:1; /*!< bit: 3 BOD12 Ready */
uint32_t BOD12DET:1; /*!< bit: 4 BOD12 Detection */
uint32_t B12SRDY:1; /*!< bit: 5 BOD12 Synchronization Ready */
uint32_t :2; /*!< bit: 6.. 7 Reserved */
uint32_t VREGRDY:1; /*!< bit: 8 Voltage Regulator Ready */
uint32_t APWSRDY:1; /*!< bit: 9 Automatic Power Switch Ready */
uint32_t VCORERDY:1; /*!< bit: 10 VDDCORE Ready */
uint32_t BBPS:1; /*!< bit: 11 Battery Backup Power Switch */
uint32_t :20; /*!< bit: 12..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_STATUS_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_STATUS_OFFSET 0x0C /**< \brief (SUPC_STATUS offset) Power and Clocks Status */
#define SUPC_STATUS_RESETVALUE 0x00000000ul /**< \brief (SUPC_STATUS reset_value) Power and Clocks Status */
#define SUPC_STATUS_BOD33RDY_Pos 0 /**< \brief (SUPC_STATUS) BOD33 Ready */
#define SUPC_STATUS_BOD33RDY (0x1ul << SUPC_STATUS_BOD33RDY_Pos)
#define SUPC_STATUS_BOD33DET_Pos 1 /**< \brief (SUPC_STATUS) BOD33 Detection */
#define SUPC_STATUS_BOD33DET (0x1ul << SUPC_STATUS_BOD33DET_Pos)
#define SUPC_STATUS_B33SRDY_Pos 2 /**< \brief (SUPC_STATUS) BOD33 Synchronization Ready */
#define SUPC_STATUS_B33SRDY (0x1ul << SUPC_STATUS_B33SRDY_Pos)
#define SUPC_STATUS_BOD12RDY_Pos 3 /**< \brief (SUPC_STATUS) BOD12 Ready */
#define SUPC_STATUS_BOD12RDY (0x1ul << SUPC_STATUS_BOD12RDY_Pos)
#define SUPC_STATUS_BOD12DET_Pos 4 /**< \brief (SUPC_STATUS) BOD12 Detection */
#define SUPC_STATUS_BOD12DET (0x1ul << SUPC_STATUS_BOD12DET_Pos)
#define SUPC_STATUS_B12SRDY_Pos 5 /**< \brief (SUPC_STATUS) BOD12 Synchronization Ready */
#define SUPC_STATUS_B12SRDY (0x1ul << SUPC_STATUS_B12SRDY_Pos)
#define SUPC_STATUS_VREGRDY_Pos 8 /**< \brief (SUPC_STATUS) Voltage Regulator Ready */
#define SUPC_STATUS_VREGRDY (0x1ul << SUPC_STATUS_VREGRDY_Pos)
#define SUPC_STATUS_APWSRDY_Pos 9 /**< \brief (SUPC_STATUS) Automatic Power Switch Ready */
#define SUPC_STATUS_APWSRDY (0x1ul << SUPC_STATUS_APWSRDY_Pos)
#define SUPC_STATUS_VCORERDY_Pos 10 /**< \brief (SUPC_STATUS) VDDCORE Ready */
#define SUPC_STATUS_VCORERDY (0x1ul << SUPC_STATUS_VCORERDY_Pos)
#define SUPC_STATUS_BBPS_Pos 11 /**< \brief (SUPC_STATUS) Battery Backup Power Switch */
#define SUPC_STATUS_BBPS (0x1ul << SUPC_STATUS_BBPS_Pos)
#define SUPC_STATUS_MASK 0x00000F3Ful /**< \brief (SUPC_STATUS) MASK Register */
/* -------- SUPC_BOD33 : (SUPC Offset: 0x10) (R/W 32) BOD33 Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t :1; /*!< bit: 0 Reserved */
uint32_t ENABLE:1; /*!< bit: 1 Enable */
uint32_t HYST:1; /*!< bit: 2 Hysteresis Enable */
uint32_t ACTION:2; /*!< bit: 3.. 4 Action when Threshold Crossed */
uint32_t STDBYCFG:1; /*!< bit: 5 Configuration in Standby mode */
uint32_t RUNSTDBY:1; /*!< bit: 6 Run during Standby */
uint32_t RUNBKUP:1; /*!< bit: 7 Configuration in Backup mode */
uint32_t ACTCFG:1; /*!< bit: 8 Configuration in Active mode */
uint32_t :1; /*!< bit: 9 Reserved */
uint32_t VMON:1; /*!< bit: 10 Voltage Monitored in active and standby mode */
uint32_t :1; /*!< bit: 11 Reserved */
uint32_t PSEL:4; /*!< bit: 12..15 Prescaler Select */
uint32_t LEVEL:6; /*!< bit: 16..21 Threshold Level for VDD */
uint32_t :2; /*!< bit: 22..23 Reserved */
uint32_t BKUPLEVEL:6; /*!< bit: 24..29 Threshold Level in backup sleep mode or for VBAT */
uint32_t :2; /*!< bit: 30..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_BOD33_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_BOD33_OFFSET 0x10 /**< \brief (SUPC_BOD33 offset) BOD33 Control */
#define SUPC_BOD33_RESETVALUE 0x00000000ul /**< \brief (SUPC_BOD33 reset_value) BOD33 Control */
#define SUPC_BOD33_ENABLE_Pos 1 /**< \brief (SUPC_BOD33) Enable */
#define SUPC_BOD33_ENABLE (0x1ul << SUPC_BOD33_ENABLE_Pos)
#define SUPC_BOD33_HYST_Pos 2 /**< \brief (SUPC_BOD33) Hysteresis Enable */
#define SUPC_BOD33_HYST (0x1ul << SUPC_BOD33_HYST_Pos)
#define SUPC_BOD33_ACTION_Pos 3 /**< \brief (SUPC_BOD33) Action when Threshold Crossed */
#define SUPC_BOD33_ACTION_Msk (0x3ul << SUPC_BOD33_ACTION_Pos)
#define SUPC_BOD33_ACTION(value) ((SUPC_BOD33_ACTION_Msk & ((value) << SUPC_BOD33_ACTION_Pos)))
#define SUPC_BOD33_ACTION_NONE_Val 0x0ul /**< \brief (SUPC_BOD33) No action */
#define SUPC_BOD33_ACTION_RESET_Val 0x1ul /**< \brief (SUPC_BOD33) The BOD33 generates a reset */
#define SUPC_BOD33_ACTION_INT_Val 0x2ul /**< \brief (SUPC_BOD33) The BOD33 generates an interrupt */
#define SUPC_BOD33_ACTION_BKUP_Val 0x3ul /**< \brief (SUPC_BOD33) The BOD33 puts the device in backup sleep mode if VMON=0 */
#define SUPC_BOD33_ACTION_NONE (SUPC_BOD33_ACTION_NONE_Val << SUPC_BOD33_ACTION_Pos)
#define SUPC_BOD33_ACTION_RESET (SUPC_BOD33_ACTION_RESET_Val << SUPC_BOD33_ACTION_Pos)
#define SUPC_BOD33_ACTION_INT (SUPC_BOD33_ACTION_INT_Val << SUPC_BOD33_ACTION_Pos)
#define SUPC_BOD33_ACTION_BKUP (SUPC_BOD33_ACTION_BKUP_Val << SUPC_BOD33_ACTION_Pos)
#define SUPC_BOD33_STDBYCFG_Pos 5 /**< \brief (SUPC_BOD33) Configuration in Standby mode */
#define SUPC_BOD33_STDBYCFG (0x1ul << SUPC_BOD33_STDBYCFG_Pos)
#define SUPC_BOD33_RUNSTDBY_Pos 6 /**< \brief (SUPC_BOD33) Run during Standby */
#define SUPC_BOD33_RUNSTDBY (0x1ul << SUPC_BOD33_RUNSTDBY_Pos)
#define SUPC_BOD33_RUNBKUP_Pos 7 /**< \brief (SUPC_BOD33) Configuration in Backup mode */
#define SUPC_BOD33_RUNBKUP (0x1ul << SUPC_BOD33_RUNBKUP_Pos)
#define SUPC_BOD33_ACTCFG_Pos 8 /**< \brief (SUPC_BOD33) Configuration in Active mode */
#define SUPC_BOD33_ACTCFG (0x1ul << SUPC_BOD33_ACTCFG_Pos)
#define SUPC_BOD33_VMON_Pos 10 /**< \brief (SUPC_BOD33) Voltage Monitored in active and standby mode */
#define SUPC_BOD33_VMON (0x1ul << SUPC_BOD33_VMON_Pos)
#define SUPC_BOD33_PSEL_Pos 12 /**< \brief (SUPC_BOD33) Prescaler Select */
#define SUPC_BOD33_PSEL_Msk (0xFul << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL(value) ((SUPC_BOD33_PSEL_Msk & ((value) << SUPC_BOD33_PSEL_Pos)))
#define SUPC_BOD33_PSEL_DIV2_Val 0x0ul /**< \brief (SUPC_BOD33) Divide clock by 2 */
#define SUPC_BOD33_PSEL_DIV4_Val 0x1ul /**< \brief (SUPC_BOD33) Divide clock by 4 */
#define SUPC_BOD33_PSEL_DIV8_Val 0x2ul /**< \brief (SUPC_BOD33) Divide clock by 8 */
#define SUPC_BOD33_PSEL_DIV16_Val 0x3ul /**< \brief (SUPC_BOD33) Divide clock by 16 */
#define SUPC_BOD33_PSEL_DIV32_Val 0x4ul /**< \brief (SUPC_BOD33) Divide clock by 32 */
#define SUPC_BOD33_PSEL_DIV64_Val 0x5ul /**< \brief (SUPC_BOD33) Divide clock by 64 */
#define SUPC_BOD33_PSEL_DIV128_Val 0x6ul /**< \brief (SUPC_BOD33) Divide clock by 128 */
#define SUPC_BOD33_PSEL_DIV256_Val 0x7ul /**< \brief (SUPC_BOD33) Divide clock by 256 */
#define SUPC_BOD33_PSEL_DIV512_Val 0x8ul /**< \brief (SUPC_BOD33) Divide clock by 512 */
#define SUPC_BOD33_PSEL_DIV1024_Val 0x9ul /**< \brief (SUPC_BOD33) Divide clock by 1024 */
#define SUPC_BOD33_PSEL_DIV2048_Val 0xAul /**< \brief (SUPC_BOD33) Divide clock by 2048 */
#define SUPC_BOD33_PSEL_DIV4096_Val 0xBul /**< \brief (SUPC_BOD33) Divide clock by 4096 */
#define SUPC_BOD33_PSEL_DIV8192_Val 0xCul /**< \brief (SUPC_BOD33) Divide clock by 8192 */
#define SUPC_BOD33_PSEL_DIV16384_Val 0xDul /**< \brief (SUPC_BOD33) Divide clock by 16384 */
#define SUPC_BOD33_PSEL_DIV32768_Val 0xEul /**< \brief (SUPC_BOD33) Divide clock by 32768 */
#define SUPC_BOD33_PSEL_DIV65536_Val 0xFul /**< \brief (SUPC_BOD33) Divide clock by 65536 */
#define SUPC_BOD33_PSEL_DIV2 (SUPC_BOD33_PSEL_DIV2_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV4 (SUPC_BOD33_PSEL_DIV4_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV8 (SUPC_BOD33_PSEL_DIV8_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV16 (SUPC_BOD33_PSEL_DIV16_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV32 (SUPC_BOD33_PSEL_DIV32_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV64 (SUPC_BOD33_PSEL_DIV64_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV128 (SUPC_BOD33_PSEL_DIV128_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV256 (SUPC_BOD33_PSEL_DIV256_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV512 (SUPC_BOD33_PSEL_DIV512_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV1024 (SUPC_BOD33_PSEL_DIV1024_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV2048 (SUPC_BOD33_PSEL_DIV2048_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV4096 (SUPC_BOD33_PSEL_DIV4096_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV8192 (SUPC_BOD33_PSEL_DIV8192_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV16384 (SUPC_BOD33_PSEL_DIV16384_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV32768 (SUPC_BOD33_PSEL_DIV32768_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_PSEL_DIV65536 (SUPC_BOD33_PSEL_DIV65536_Val << SUPC_BOD33_PSEL_Pos)
#define SUPC_BOD33_LEVEL_Pos 16 /**< \brief (SUPC_BOD33) Threshold Level for VDD */
#define SUPC_BOD33_LEVEL_Msk (0x3Ful << SUPC_BOD33_LEVEL_Pos)
#define SUPC_BOD33_LEVEL(value) ((SUPC_BOD33_LEVEL_Msk & ((value) << SUPC_BOD33_LEVEL_Pos)))
#define SUPC_BOD33_BKUPLEVEL_Pos 24 /**< \brief (SUPC_BOD33) Threshold Level in backup sleep mode or for VBAT */
#define SUPC_BOD33_BKUPLEVEL_Msk (0x3Ful << SUPC_BOD33_BKUPLEVEL_Pos)
#define SUPC_BOD33_BKUPLEVEL(value) ((SUPC_BOD33_BKUPLEVEL_Msk & ((value) << SUPC_BOD33_BKUPLEVEL_Pos)))
#define SUPC_BOD33_MASK 0x3F3FF5FEul /**< \brief (SUPC_BOD33) MASK Register */
/* -------- SUPC_BOD12 : (SUPC Offset: 0x14) (R/W 32) BOD12 Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t :1; /*!< bit: 0 Reserved */
uint32_t ENABLE:1; /*!< bit: 1 Enable */
uint32_t HYST:1; /*!< bit: 2 Hysteresis Enable */
uint32_t ACTION:2; /*!< bit: 3.. 4 Action when Threshold Crossed */
uint32_t STDBYCFG:1; /*!< bit: 5 Configuration in Standby mode */
uint32_t RUNSTDBY:1; /*!< bit: 6 Run during Standby */
uint32_t :1; /*!< bit: 7 Reserved */
uint32_t ACTCFG:1; /*!< bit: 8 Configuration in Active mode */
uint32_t :3; /*!< bit: 9..11 Reserved */
uint32_t PSEL:4; /*!< bit: 12..15 Prescaler Select */
uint32_t LEVEL:6; /*!< bit: 16..21 Threshold Level */
uint32_t :10; /*!< bit: 22..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_BOD12_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_BOD12_OFFSET 0x14 /**< \brief (SUPC_BOD12 offset) BOD12 Control */
#define SUPC_BOD12_RESETVALUE 0x00000000ul /**< \brief (SUPC_BOD12 reset_value) BOD12 Control */
#define SUPC_BOD12_ENABLE_Pos 1 /**< \brief (SUPC_BOD12) Enable */
#define SUPC_BOD12_ENABLE (0x1ul << SUPC_BOD12_ENABLE_Pos)
#define SUPC_BOD12_HYST_Pos 2 /**< \brief (SUPC_BOD12) Hysteresis Enable */
#define SUPC_BOD12_HYST (0x1ul << SUPC_BOD12_HYST_Pos)
#define SUPC_BOD12_ACTION_Pos 3 /**< \brief (SUPC_BOD12) Action when Threshold Crossed */
#define SUPC_BOD12_ACTION_Msk (0x3ul << SUPC_BOD12_ACTION_Pos)
#define SUPC_BOD12_ACTION(value) ((SUPC_BOD12_ACTION_Msk & ((value) << SUPC_BOD12_ACTION_Pos)))
#define SUPC_BOD12_ACTION_NONE_Val 0x0ul /**< \brief (SUPC_BOD12) No action */
#define SUPC_BOD12_ACTION_RESET_Val 0x1ul /**< \brief (SUPC_BOD12) The BOD12 generates a reset */
#define SUPC_BOD12_ACTION_INT_Val 0x2ul /**< \brief (SUPC_BOD12) The BOD12 generates an interrupt */
#define SUPC_BOD12_ACTION_NONE (SUPC_BOD12_ACTION_NONE_Val << SUPC_BOD12_ACTION_Pos)
#define SUPC_BOD12_ACTION_RESET (SUPC_BOD12_ACTION_RESET_Val << SUPC_BOD12_ACTION_Pos)
#define SUPC_BOD12_ACTION_INT (SUPC_BOD12_ACTION_INT_Val << SUPC_BOD12_ACTION_Pos)
#define SUPC_BOD12_STDBYCFG_Pos 5 /**< \brief (SUPC_BOD12) Configuration in Standby mode */
#define SUPC_BOD12_STDBYCFG (0x1ul << SUPC_BOD12_STDBYCFG_Pos)
#define SUPC_BOD12_RUNSTDBY_Pos 6 /**< \brief (SUPC_BOD12) Run during Standby */
#define SUPC_BOD12_RUNSTDBY (0x1ul << SUPC_BOD12_RUNSTDBY_Pos)
#define SUPC_BOD12_ACTCFG_Pos 8 /**< \brief (SUPC_BOD12) Configuration in Active mode */
#define SUPC_BOD12_ACTCFG (0x1ul << SUPC_BOD12_ACTCFG_Pos)
#define SUPC_BOD12_PSEL_Pos 12 /**< \brief (SUPC_BOD12) Prescaler Select */
#define SUPC_BOD12_PSEL_Msk (0xFul << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL(value) ((SUPC_BOD12_PSEL_Msk & ((value) << SUPC_BOD12_PSEL_Pos)))
#define SUPC_BOD12_PSEL_DIV2_Val 0x0ul /**< \brief (SUPC_BOD12) Divide clock by 2 */
#define SUPC_BOD12_PSEL_DIV4_Val 0x1ul /**< \brief (SUPC_BOD12) Divide clock by 4 */
#define SUPC_BOD12_PSEL_DIV8_Val 0x2ul /**< \brief (SUPC_BOD12) Divide clock by 8 */
#define SUPC_BOD12_PSEL_DIV16_Val 0x3ul /**< \brief (SUPC_BOD12) Divide clock by 16 */
#define SUPC_BOD12_PSEL_DIV32_Val 0x4ul /**< \brief (SUPC_BOD12) Divide clock by 32 */
#define SUPC_BOD12_PSEL_DIV64_Val 0x5ul /**< \brief (SUPC_BOD12) Divide clock by 64 */
#define SUPC_BOD12_PSEL_DIV128_Val 0x6ul /**< \brief (SUPC_BOD12) Divide clock by 128 */
#define SUPC_BOD12_PSEL_DIV256_Val 0x7ul /**< \brief (SUPC_BOD12) Divide clock by 256 */
#define SUPC_BOD12_PSEL_DIV512_Val 0x8ul /**< \brief (SUPC_BOD12) Divide clock by 512 */
#define SUPC_BOD12_PSEL_DIV1024_Val 0x9ul /**< \brief (SUPC_BOD12) Divide clock by 1024 */
#define SUPC_BOD12_PSEL_DIV2048_Val 0xAul /**< \brief (SUPC_BOD12) Divide clock by 2048 */
#define SUPC_BOD12_PSEL_DIV4096_Val 0xBul /**< \brief (SUPC_BOD12) Divide clock by 4096 */
#define SUPC_BOD12_PSEL_DIV8192_Val 0xCul /**< \brief (SUPC_BOD12) Divide clock by 8192 */
#define SUPC_BOD12_PSEL_DIV16384_Val 0xDul /**< \brief (SUPC_BOD12) Divide clock by 16384 */
#define SUPC_BOD12_PSEL_DIV32768_Val 0xEul /**< \brief (SUPC_BOD12) Divide clock by 32768 */
#define SUPC_BOD12_PSEL_DIV65536_Val 0xFul /**< \brief (SUPC_BOD12) Divide clock by 65536 */
#define SUPC_BOD12_PSEL_DIV2 (SUPC_BOD12_PSEL_DIV2_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV4 (SUPC_BOD12_PSEL_DIV4_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV8 (SUPC_BOD12_PSEL_DIV8_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV16 (SUPC_BOD12_PSEL_DIV16_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV32 (SUPC_BOD12_PSEL_DIV32_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV64 (SUPC_BOD12_PSEL_DIV64_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV128 (SUPC_BOD12_PSEL_DIV128_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV256 (SUPC_BOD12_PSEL_DIV256_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV512 (SUPC_BOD12_PSEL_DIV512_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV1024 (SUPC_BOD12_PSEL_DIV1024_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV2048 (SUPC_BOD12_PSEL_DIV2048_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV4096 (SUPC_BOD12_PSEL_DIV4096_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV8192 (SUPC_BOD12_PSEL_DIV8192_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV16384 (SUPC_BOD12_PSEL_DIV16384_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV32768 (SUPC_BOD12_PSEL_DIV32768_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_PSEL_DIV65536 (SUPC_BOD12_PSEL_DIV65536_Val << SUPC_BOD12_PSEL_Pos)
#define SUPC_BOD12_LEVEL_Pos 16 /**< \brief (SUPC_BOD12) Threshold Level */
#define SUPC_BOD12_LEVEL_Msk (0x3Ful << SUPC_BOD12_LEVEL_Pos)
#define SUPC_BOD12_LEVEL(value) ((SUPC_BOD12_LEVEL_Msk & ((value) << SUPC_BOD12_LEVEL_Pos)))
#define SUPC_BOD12_MASK 0x003FF17Eul /**< \brief (SUPC_BOD12) MASK Register */
/* -------- SUPC_VREG : (SUPC Offset: 0x18) (R/W 32) VREG Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t :1; /*!< bit: 0 Reserved */
uint32_t ENABLE:1; /*!< bit: 1 Enable */
uint32_t SEL:2; /*!< bit: 2.. 3 Voltage Regulator Selection in active mode */
uint32_t :2; /*!< bit: 4.. 5 Reserved */
uint32_t RUNSTDBY:1; /*!< bit: 6 Run during Standby */
uint32_t :1; /*!< bit: 7 Reserved */
uint32_t LPEFF:1; /*!< bit: 8 Low Power Efficiency */
uint32_t :7; /*!< bit: 9..15 Reserved */
uint32_t VSVSTEP:4; /*!< bit: 16..19 Voltage Scaling Voltage Step */
uint32_t :4; /*!< bit: 20..23 Reserved */
uint32_t VSPER:8; /*!< bit: 24..31 Voltage Scaling Period */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_VREG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_VREG_OFFSET 0x18 /**< \brief (SUPC_VREG offset) VREG Control */
#define SUPC_VREG_RESETVALUE 0x00000000ul /**< \brief (SUPC_VREG reset_value) VREG Control */
#define SUPC_VREG_ENABLE_Pos 1 /**< \brief (SUPC_VREG) Enable */
#define SUPC_VREG_ENABLE (0x1ul << SUPC_VREG_ENABLE_Pos)
#define SUPC_VREG_SEL_Pos 2 /**< \brief (SUPC_VREG) Voltage Regulator Selection in active mode */
#define SUPC_VREG_SEL_Msk (0x3ul << SUPC_VREG_SEL_Pos)
#define SUPC_VREG_SEL(value) ((SUPC_VREG_SEL_Msk & ((value) << SUPC_VREG_SEL_Pos)))
#define SUPC_VREG_SEL_LDO_Val 0x0ul /**< \brief (SUPC_VREG) LDO selection */
#define SUPC_VREG_SEL_BUCK_Val 0x1ul /**< \brief (SUPC_VREG) Buck selection */
#define SUPC_VREG_SEL_SCVREG_Val 0x2ul /**< \brief (SUPC_VREG) Switched Cap selection */
#define SUPC_VREG_SEL_LDO (SUPC_VREG_SEL_LDO_Val << SUPC_VREG_SEL_Pos)
#define SUPC_VREG_SEL_BUCK (SUPC_VREG_SEL_BUCK_Val << SUPC_VREG_SEL_Pos)
#define SUPC_VREG_SEL_SCVREG (SUPC_VREG_SEL_SCVREG_Val << SUPC_VREG_SEL_Pos)
#define SUPC_VREG_RUNSTDBY_Pos 6 /**< \brief (SUPC_VREG) Run during Standby */
#define SUPC_VREG_RUNSTDBY (0x1ul << SUPC_VREG_RUNSTDBY_Pos)
#define SUPC_VREG_LPEFF_Pos 8 /**< \brief (SUPC_VREG) Low Power Efficiency */
#define SUPC_VREG_LPEFF (0x1ul << SUPC_VREG_LPEFF_Pos)
#define SUPC_VREG_VSVSTEP_Pos 16 /**< \brief (SUPC_VREG) Voltage Scaling Voltage Step */
#define SUPC_VREG_VSVSTEP_Msk (0xFul << SUPC_VREG_VSVSTEP_Pos)
#define SUPC_VREG_VSVSTEP(value) ((SUPC_VREG_VSVSTEP_Msk & ((value) << SUPC_VREG_VSVSTEP_Pos)))
#define SUPC_VREG_VSPER_Pos 24 /**< \brief (SUPC_VREG) Voltage Scaling Period */
#define SUPC_VREG_VSPER_Msk (0xFFul << SUPC_VREG_VSPER_Pos)
#define SUPC_VREG_VSPER(value) ((SUPC_VREG_VSPER_Msk & ((value) << SUPC_VREG_VSPER_Pos)))
#define SUPC_VREG_MASK 0xFF0F014Eul /**< \brief (SUPC_VREG) MASK Register */
/* -------- SUPC_VREF : (SUPC Offset: 0x1C) (R/W 32) VREF Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t :1; /*!< bit: 0 Reserved */
uint32_t TSEN:1; /*!< bit: 1 Temperature Sensor Output Enable */
uint32_t VREFOE:1; /*!< bit: 2 Voltage Reference Output Enable */
uint32_t :3; /*!< bit: 3.. 5 Reserved */
uint32_t RUNSTDBY:1; /*!< bit: 6 Run during Standby */
uint32_t ONDEMAND:1; /*!< bit: 7 On Demand Contrl */
uint32_t :8; /*!< bit: 8..15 Reserved */
uint32_t SEL:4; /*!< bit: 16..19 Voltage Reference Selection */
uint32_t :12; /*!< bit: 20..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_VREF_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_VREF_OFFSET 0x1C /**< \brief (SUPC_VREF offset) VREF Control */
#define SUPC_VREF_RESETVALUE 0x00000000ul /**< \brief (SUPC_VREF reset_value) VREF Control */
#define SUPC_VREF_TSEN_Pos 1 /**< \brief (SUPC_VREF) Temperature Sensor Output Enable */
#define SUPC_VREF_TSEN (0x1ul << SUPC_VREF_TSEN_Pos)
#define SUPC_VREF_VREFOE_Pos 2 /**< \brief (SUPC_VREF) Voltage Reference Output Enable */
#define SUPC_VREF_VREFOE (0x1ul << SUPC_VREF_VREFOE_Pos)
#define SUPC_VREF_RUNSTDBY_Pos 6 /**< \brief (SUPC_VREF) Run during Standby */
#define SUPC_VREF_RUNSTDBY (0x1ul << SUPC_VREF_RUNSTDBY_Pos)
#define SUPC_VREF_ONDEMAND_Pos 7 /**< \brief (SUPC_VREF) On Demand Contrl */
#define SUPC_VREF_ONDEMAND (0x1ul << SUPC_VREF_ONDEMAND_Pos)
#define SUPC_VREF_SEL_Pos 16 /**< \brief (SUPC_VREF) Voltage Reference Selection */
#define SUPC_VREF_SEL_Msk (0xFul << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL(value) ((SUPC_VREF_SEL_Msk & ((value) << SUPC_VREF_SEL_Pos)))
#define SUPC_VREF_SEL_1V0_Val 0x0ul /**< \brief (SUPC_VREF) 1.0V voltage reference typical value */
#define SUPC_VREF_SEL_1V1_Val 0x1ul /**< \brief (SUPC_VREF) 1.1V voltage reference typical value */
#define SUPC_VREF_SEL_1V2_Val 0x2ul /**< \brief (SUPC_VREF) 1.2V voltage reference typical value */
#define SUPC_VREF_SEL_1V25_Val 0x3ul /**< \brief (SUPC_VREF) 1.25V voltage reference typical value */
#define SUPC_VREF_SEL_2V0_Val 0x4ul /**< \brief (SUPC_VREF) 2.0V voltage reference typical value */
#define SUPC_VREF_SEL_2V2_Val 0x5ul /**< \brief (SUPC_VREF) 2.2V voltage reference typical value */
#define SUPC_VREF_SEL_2V4_Val 0x6ul /**< \brief (SUPC_VREF) 2.4V voltage reference typical value */
#define SUPC_VREF_SEL_2V5_Val 0x7ul /**< \brief (SUPC_VREF) 2.5V voltage reference typical value */
#define SUPC_VREF_SEL_1V0 (SUPC_VREF_SEL_1V0_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL_1V1 (SUPC_VREF_SEL_1V1_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL_1V2 (SUPC_VREF_SEL_1V2_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL_1V25 (SUPC_VREF_SEL_1V25_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL_2V0 (SUPC_VREF_SEL_2V0_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL_2V2 (SUPC_VREF_SEL_2V2_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL_2V4 (SUPC_VREF_SEL_2V4_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_SEL_2V5 (SUPC_VREF_SEL_2V5_Val << SUPC_VREF_SEL_Pos)
#define SUPC_VREF_MASK 0x000F00C6ul /**< \brief (SUPC_VREF) MASK Register */
/* -------- SUPC_BBPS : (SUPC Offset: 0x20) (R/W 32) Battery Backup Power Switch -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t CONF:2; /*!< bit: 0.. 1 Battery Backup Configuration */
uint32_t WAKEEN:1; /*!< bit: 2 Wake Enable */
uint32_t PSOKEN:1; /*!< bit: 3 Power Supply OK Enable */
uint32_t :28; /*!< bit: 4..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_BBPS_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_BBPS_OFFSET 0x20 /**< \brief (SUPC_BBPS offset) Battery Backup Power Switch */
#define SUPC_BBPS_RESETVALUE 0x00000000ul /**< \brief (SUPC_BBPS reset_value) Battery Backup Power Switch */
#define SUPC_BBPS_CONF_Pos 0 /**< \brief (SUPC_BBPS) Battery Backup Configuration */
#define SUPC_BBPS_CONF_Msk (0x3ul << SUPC_BBPS_CONF_Pos)
#define SUPC_BBPS_CONF(value) ((SUPC_BBPS_CONF_Msk & ((value) << SUPC_BBPS_CONF_Pos)))
#define SUPC_BBPS_CONF_NONE_Val 0x0ul /**< \brief (SUPC_BBPS) The backup domain is always supplied by main power */
#define SUPC_BBPS_CONF_APWS_Val 0x1ul /**< \brief (SUPC_BBPS) The power switch is handled by the automatic power switch */
#define SUPC_BBPS_CONF_FORCED_Val 0x2ul /**< \brief (SUPC_BBPS) The backup domain is always supplied by battery backup power */
#define SUPC_BBPS_CONF_BOD33_Val 0x3ul /**< \brief (SUPC_BBPS) The power switch is handled by the BOD33 */
#define SUPC_BBPS_CONF_NONE (SUPC_BBPS_CONF_NONE_Val << SUPC_BBPS_CONF_Pos)
#define SUPC_BBPS_CONF_APWS (SUPC_BBPS_CONF_APWS_Val << SUPC_BBPS_CONF_Pos)
#define SUPC_BBPS_CONF_FORCED (SUPC_BBPS_CONF_FORCED_Val << SUPC_BBPS_CONF_Pos)
#define SUPC_BBPS_CONF_BOD33 (SUPC_BBPS_CONF_BOD33_Val << SUPC_BBPS_CONF_Pos)
#define SUPC_BBPS_WAKEEN_Pos 2 /**< \brief (SUPC_BBPS) Wake Enable */
#define SUPC_BBPS_WAKEEN (0x1ul << SUPC_BBPS_WAKEEN_Pos)
#define SUPC_BBPS_PSOKEN_Pos 3 /**< \brief (SUPC_BBPS) Power Supply OK Enable */
#define SUPC_BBPS_PSOKEN (0x1ul << SUPC_BBPS_PSOKEN_Pos)
#define SUPC_BBPS_MASK 0x0000000Ful /**< \brief (SUPC_BBPS) MASK Register */
/* -------- SUPC_BKOUT : (SUPC Offset: 0x24) (R/W 32) Backup Output Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t EN:2; /*!< bit: 0.. 1 Enable Output */
uint32_t :6; /*!< bit: 2.. 7 Reserved */
uint32_t CLR:2; /*!< bit: 8.. 9 Clear Output */
uint32_t :6; /*!< bit: 10..15 Reserved */
uint32_t SET:2; /*!< bit: 16..17 Set Output */
uint32_t :6; /*!< bit: 18..23 Reserved */
uint32_t RTCTGL:2; /*!< bit: 24..25 RTC Toggle Output */
uint32_t :6; /*!< bit: 26..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_BKOUT_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_BKOUT_OFFSET 0x24 /**< \brief (SUPC_BKOUT offset) Backup Output Control */
#define SUPC_BKOUT_RESETVALUE 0x00000000ul /**< \brief (SUPC_BKOUT reset_value) Backup Output Control */
#define SUPC_BKOUT_EN_Pos 0 /**< \brief (SUPC_BKOUT) Enable Output */
#define SUPC_BKOUT_EN_Msk (0x3ul << SUPC_BKOUT_EN_Pos)
#define SUPC_BKOUT_EN(value) ((SUPC_BKOUT_EN_Msk & ((value) << SUPC_BKOUT_EN_Pos)))
#define SUPC_BKOUT_CLR_Pos 8 /**< \brief (SUPC_BKOUT) Clear Output */
#define SUPC_BKOUT_CLR_Msk (0x3ul << SUPC_BKOUT_CLR_Pos)
#define SUPC_BKOUT_CLR(value) ((SUPC_BKOUT_CLR_Msk & ((value) << SUPC_BKOUT_CLR_Pos)))
#define SUPC_BKOUT_SET_Pos 16 /**< \brief (SUPC_BKOUT) Set Output */
#define SUPC_BKOUT_SET_Msk (0x3ul << SUPC_BKOUT_SET_Pos)
#define SUPC_BKOUT_SET(value) ((SUPC_BKOUT_SET_Msk & ((value) << SUPC_BKOUT_SET_Pos)))
#define SUPC_BKOUT_RTCTGL_Pos 24 /**< \brief (SUPC_BKOUT) RTC Toggle Output */
#define SUPC_BKOUT_RTCTGL_Msk (0x3ul << SUPC_BKOUT_RTCTGL_Pos)
#define SUPC_BKOUT_RTCTGL(value) ((SUPC_BKOUT_RTCTGL_Msk & ((value) << SUPC_BKOUT_RTCTGL_Pos)))
#define SUPC_BKOUT_MASK 0x03030303ul /**< \brief (SUPC_BKOUT) MASK Register */
/* -------- SUPC_BKIN : (SUPC Offset: 0x28) (R/ 32) Backup Input Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t BKIN:8; /*!< bit: 0.. 7 Backup Input Value */
uint32_t :24; /*!< bit: 8..31 Reserved */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} SUPC_BKIN_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SUPC_BKIN_OFFSET 0x28 /**< \brief (SUPC_BKIN offset) Backup Input Control */
#define SUPC_BKIN_RESETVALUE 0x00000000ul /**< \brief (SUPC_BKIN reset_value) Backup Input Control */
#define SUPC_BKIN_BKIN_Pos 0 /**< \brief (SUPC_BKIN) Backup Input Value */
#define SUPC_BKIN_BKIN_Msk (0xFFul << SUPC_BKIN_BKIN_Pos)
#define SUPC_BKIN_BKIN(value) ((SUPC_BKIN_BKIN_Msk & ((value) << SUPC_BKIN_BKIN_Pos)))
#define SUPC_BKIN_MASK 0x000000FFul /**< \brief (SUPC_BKIN) MASK Register */
/** \brief SUPC hardware registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct {
__IO SUPC_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x00 (R/W 32) Interrupt Enable Clear */
__IO SUPC_INTENSET_Type INTENSET; /**< \brief Offset: 0x04 (R/W 32) Interrupt Enable Set */
__IO SUPC_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x08 (R/W 32) Interrupt Flag Status and Clear */
__I SUPC_STATUS_Type STATUS; /**< \brief Offset: 0x0C (R/ 32) Power and Clocks Status */
__IO SUPC_BOD33_Type BOD33; /**< \brief Offset: 0x10 (R/W 32) BOD33 Control */
__IO SUPC_BOD12_Type BOD12; /**< \brief Offset: 0x14 (R/W 32) BOD12 Control */
__IO SUPC_VREG_Type VREG; /**< \brief Offset: 0x18 (R/W 32) VREG Control */
__IO SUPC_VREF_Type VREF; /**< \brief Offset: 0x1C (R/W 32) VREF Control */
__IO SUPC_BBPS_Type BBPS; /**< \brief Offset: 0x20 (R/W 32) Battery Backup Power Switch */
__IO SUPC_BKOUT_Type BKOUT; /**< \brief Offset: 0x24 (R/W 32) Backup Output Control */
__I SUPC_BKIN_Type BKIN; /**< \brief Offset: 0x28 (R/ 32) Backup Input Control */
} Supc;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/*@}*/
#endif /* _SAML21_SUPC_COMPONENT_ */