GitBucket
Newer
/*************************************************************************************************/
/*!
* \file hci_defs.h
*
* \brief HCI constants and definitions from the Bluetooth specification.
*
* $Date: 2015-06-12 07:19:18 -0400 (Fri, 12 Jun 2015) $
* $Revision: 3061 $
*
* Copyright (c) 2009-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: LicenseRef-PBL
*
* This file and the related binary are licensed under the
* Permissive Binary License, Version 1.0 (the "License");
* you may not use these files except in compliance with the License.
*
* You may obtain a copy of the License here:
* LICENSE-permissive-binary-license-1.0.txt and at
* https://www.mbed.com/licenses/PBL-1.0
*
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*************************************************************************************************/
#ifndef HCI_DEFS_H
#define HCI_DEFS_H
#ifdef __cplusplus
extern "C" {
#endif
/*! Packet definitions */
#define HCI_CMD_HDR_LEN 3 /*! Command packet header length */
#define HCI_ACL_HDR_LEN 4 /*! ACL packet header length */
#define HCI_EVT_HDR_LEN 2 /*! Event packet header length */
#define HCI_EVT_PARAM_MAX_LEN 255 /*! Maximum length of event packet parameters */
#define HCI_ACL_DEFAULT_LEN 27 /*! Default maximum ACL packet length */
#define HCI_PB_FLAG_MASK 0x3000 /*! ACL packet boundary flag mask */
#define HCI_PB_START_H2C 0x0000 /*! Packet boundary flag, start, host-to-controller */
#define HCI_PB_CONTINUE 0x1000 /*! Packet boundary flag, continue */
#define HCI_PB_START_C2H 0x2000 /*! Packet boundary flag, start, controller-to-host */
#define HCI_HANDLE_MASK 0x0FFF /*! Mask for handle bits in ACL packet */
#define HCI_HANDLE_NONE 0xFFFF /*! Value for invalid handle */
/*! Packet types */
#define HCI_CMD_TYPE 1 /*! HCI command packet */
#define HCI_ACL_TYPE 2 /*! HCI ACL data packet */
#define HCI_EVT_TYPE 4 /*! HCI event packet */
/*! Error codes */
#define HCI_SUCCESS 0x00 /*! Success */
#define HCI_ERR_UNKNOWN_CMD 0x01 /*! Unknown HCI command */
#define HCI_ERR_UNKNOWN_HANDLE 0x02 /*! Unknown connection identifier */
#define HCI_ERR_HARDWARE_FAILURE 0x03 /*! Hardware failure */
#define HCI_ERR_PAGE_TIMEOUT 0x04 /*! Page timeout */
#define HCI_ERR_AUTH_FAILURE 0x05 /*! Authentication failure */
#define HCI_ERR_KEY_MISSING 0x06 /*! PIN or key missing */
#define HCI_ERR_MEMORY_EXCEEDED 0x07 /*! Memory capacity exceeded */
#define HCI_ERR_CONN_TIMEOUT 0x08 /*! Connection timeout */
#define HCI_ERR_CONN_LIMIT 0x09 /*! Connection limit exceeded */
#define HCI_ERR_SYNCH_CONN_LIMIT 0x0A /*! Synchronous connection limit exceeded */
#define HCI_ERR_ACL_CONN_EXISTS 0x0B /*! ACL connection already exists */
#define HCI_ERR_CMD_DISALLOWED 0x0C /*! Command disallowed */
#define HCI_ERR_REJ_RESOURCES 0x0D /*! Connection rejected limited resources */
#define HCI_ERR_REJ_SECURITY 0x0E /*! Connection rejected security reasons */
#define HCI_ERR_REJ_BD_ADDR 0x0F /*! Connection rejected unacceptable BD_ADDR */
#define HCI_ERR_ACCEPT_TIMEOUT 0x10 /*! Connection accept timeout exceeded */
#define HCI_ERR_UNSUP_FEAT 0x11 /*! Unsupported feature or parameter value */
#define HCI_ERR_INVALID_PARAM 0x12 /*! Invalid HCI command parameters */
#define HCI_ERR_REMOTE_TERMINATED 0x13 /*! Remote user terminated connection */
#define HCI_ERR_REMOTE_RESOURCES 0x14 /*! Remote device low resources */
#define HCI_ERR_REMOTE_POWER_OFF 0x15 /*! Remote device power off */
#define HCI_ERR_LOCAL_TERMINATED 0x16 /*! Connection terminated by local host */
#define HCI_ERR_REPEATED_ATTEMPTS 0x17 /*! Repeated attempts */
#define HCI_ERR_PAIRING_NOT_ALLOWED 0x18 /*! Pairing not allowed */
#define HCI_ERR_UNKNOWN_LMP_PDU 0x19 /*! Unknown LMP PDU */
#define HCI_ERR_UNSUP_REMOTE_FEAT 0x1A /*! Unsupported remote feature */
#define HCI_ERR_SCO_OFFSET 0x1B /*! SCO offset rejected */
#define HCI_ERR_SCO_INTERVAL 0x1C /*! SCO interval rejected */
#define HCI_ERR_SCO_MODE 0x1D /*! SCO air mode rejected */
#define HCI_ERR_LMP_PARAM 0x1E /*! Invalid LMP parameters */
#define HCI_ERR_UNSPECIFIED 0x1F /*! Unspecified error */
#define HCI_ERR_UNSUP_LMP_PARAM 0x20 /*! Unsupported LMP parameter value */
#define HCI_ERR_ROLE_CHANGE 0x21 /*! Role change not allowed */
#define HCI_ERR_LL_RESP_TIMEOUT 0x22 /*! LL response timeout */
#define HCI_ERR_LMP_COLLISION 0x23 /*! LMP error transaction collision */
#define HCI_ERR_LMP_PDU 0x24 /*! LMP pdu not allowed */
#define HCI_ERR_ENCRYPT_MODE 0x25 /*! Encryption mode not acceptable */
#define HCI_ERR_LINK_KEY 0x26 /*! Link key can not be changed */
#define HCI_ERR_UNSUP_QOS 0x27 /*! Requested qos not supported */
#define HCI_ERR_INSTANT_PASSED 0x28 /*! Instant passed */
#define HCI_ERR_UNSUP_UNIT_KEY 0x29 /*! Pairing with unit key not supported */
#define HCI_ERR_TRANSACT_COLLISION 0x2A /*! Different transaction collision */
#define HCI_ERR_CHANNEL_CLASS 0x2E /*! Channel classification not supported */
#define HCI_ERR_MEMORY 0x2F /*! Insufficient security */
#define HCI_ERR_PARAMETER_RANGE 0x30 /*! Parameter out of mandatory range */
#define HCI_ERR_ROLE_SWITCH_PEND 0x32 /*! Role switch pending */
#define HCI_ERR_RESERVED_SLOT 0x34 /*! Reserved slot violation */
#define HCI_ERR_ROLE_SWITCH 0x35 /*! Role switch failed */
#define HCI_ERR_INQ_TOO_LARGE 0x36 /*! Extended inquiry response too large */
#define HCI_ERR_UNSUP_SSP 0x37 /*! Secure simple pairing not supported by host */
#define HCI_ERR_HOST_BUSY_PAIRING 0x38 /*! Host busy - pairing */
#define HCI_ERR_NO_CHANNEL 0x39 /*! Connection rejected no suitable channel */
#define HCI_ERR_CONTROLLER_BUSY 0x3A /*! Controller busy */
#define HCI_ERR_CONN_INTERVAL 0x3B /*! Unacceptable connection interval */
#define HCI_ERR_ADV_TIMEOUT 0x3C /*! Directed advertising timeout */
#define HCI_ERR_MIC_FAILURE 0x3D /*! Connection terminated due to MIC failure */
#define HCI_ERR_CONN_FAIL 0x3E /*! Connection failed to be established */
#define HCI_ERR_MAC_CONN_FAIL 0x3F /*! MAC connection failed */
/*! Command groups */
#define HCI_OGF_NOP 0x00 /*! No operation */
#define HCI_OGF_LINK_CONTROL 0x01 /*! Link control */
#define HCI_OGF_LINK_POLICY 0x02 /*! Link policy */
#define HCI_OGF_CONTROLLER 0x03 /*! Controller and baseband */
#define HCI_OGF_INFORMATIONAL 0x04 /*! Informational parameters */
#define HCI_OGF_STATUS 0x05 /*! Status parameters */
#define HCI_OGF_TESTING 0x06 /*! Testing */
#define HCI_OGF_LE_CONTROLLER 0x08 /*! LE controller */
#define HCI_OGF_VENDOR_SPEC 0x3F /*! Vendor specific */
/*! NOP command */
#define HCI_OCF_NOP 0x00
/*! Link control commands */
#define HCI_OCF_DISCONNECT 0x06
#define HCI_OCF_READ_REMOTE_VER_INFO 0x1D
/*! Link policy commands (none used for LE) */
/*! Controller and baseband commands */
#define HCI_OCF_SET_EVENT_MASK 0x01
#define HCI_OCF_RESET 0x03
#define HCI_OCF_READ_TX_PWR_LVL 0x2D
#define HCI_OCF_SET_CONTROLLER_TO_HOST_FC 0x31
#define HCI_OCF_HOST_BUFFER_SIZE 0x33
#define HCI_OCF_HOST_NUM_CMPL_PKTS 0x35
/*! Informational commands */
#define HCI_OCF_READ_LOCAL_VER_INFO 0x01
#define HCI_OCF_READ_LOCAL_SUP_CMDS 0x02
#define HCI_OCF_READ_LOCAL_SUP_FEAT 0x03
#define HCI_OCF_READ_BUF_SIZE 0x05
#define HCI_OCF_READ_BD_ADDR 0x09
/*! Status commands */
#define HCI_OCF_READ_RSSI 0x05
/*! LE controller commands */
#define HCI_OCF_LE_SET_EVENT_MASK 0x01
#define HCI_OCF_LE_READ_BUF_SIZE 0x02
#define HCI_OCF_LE_READ_LOCAL_SUP_FEAT 0x03
#define HCI_OCF_LE_SET_RAND_ADDR 0x05
#define HCI_OCF_LE_SET_ADV_PARAM 0x06
#define HCI_OCF_LE_READ_ADV_TX_POWER 0x07
#define HCI_OCF_LE_SET_ADV_DATA 0x08
#define HCI_OCF_LE_SET_SCAN_RESP_DATA 0x09
#define HCI_OCF_LE_SET_ADV_ENABLE 0x0A
#define HCI_OCF_LE_SET_SCAN_PARAM 0x0B
#define HCI_OCF_LE_SET_SCAN_ENABLE 0x0C
#define HCI_OCF_LE_CREATE_CONN 0x0D
#define HCI_OCF_LE_CREATE_CONN_CANCEL 0x0E
#define HCI_OCF_LE_READ_WHITE_LIST_SIZE 0x0F
#define HCI_OCF_LE_CLEAR_WHITE_LIST 0x10
#define HCI_OCF_LE_ADD_DEV_WHITE_LIST 0x11
#define HCI_OCF_LE_REMOVE_DEV_WHITE_LIST 0x12
#define HCI_OCF_LE_CONN_UPDATE 0x13
#define HCI_OCF_LE_SET_HOST_CHAN_CLASS 0x14
#define HCI_OCF_LE_READ_CHAN_MAP 0x15
#define HCI_OCF_LE_READ_REMOTE_FEAT 0x16
#define HCI_OCF_LE_ENCRYPT 0x17
#define HCI_OCF_LE_RAND 0x18
#define HCI_OCF_LE_START_ENCRYPTION 0x19
#define HCI_OCF_LE_LTK_REQ_REPL 0x1A
#define HCI_OCF_LE_LTK_REQ_NEG_REPL 0x1B
#define HCI_OCF_LE_READ_SUP_STATES 0x1C
#define HCI_OCF_LE_RECEIVER_TEST 0x1D
#define HCI_OCF_LE_TRANSMITTER_TEST 0x1E
#define HCI_OCF_LE_TEST_END 0x1F
/*! Opcode manipulation macros */
#define HCI_OPCODE(ogf, ocf) (((ogf) << 10) + (ocf))
#define HCI_OGF(opcode) ((opcode) >> 10)
#define HCI_OCF(opcode) ((opcode) & 0x03FF)
/*! Command opcodes */
#define HCI_OPCODE_NOP HCI_OPCODE(HCI_OGF_NOP, HCI_OCF_NOP)
#define HCI_OPCODE_DISCONNECT HCI_OPCODE(HCI_OGF_LINK_CONTROL, HCI_OCF_DISCONNECT)
#define HCI_OPCODE_READ_REMOTE_VER_INFO HCI_OPCODE(HCI_OGF_LINK_CONTROL, HCI_OCF_READ_REMOTE_VER_INFO)
#define HCI_OPCODE_SET_EVENT_MASK HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_SET_EVENT_MASK)
#define HCI_OPCODE_RESET HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_RESET)
#define HCI_OPCODE_READ_TX_PWR_LVL HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_READ_TX_PWR_LVL)
#define HCI_OPCODE_SET_CONTROLLER_TO_HOST_FC HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_SET_CONTROLLER_TO_HOST_FC)
#define HCI_OPCODE_HOST_BUFFER_SIZE HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_HOST_BUFFER_SIZE)
#define HCI_OPCODE_HOST_NUM_CMPL_PKTS HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_HOST_NUM_CMPL_PKTS)
#define HCI_OPCODE_READ_LOCAL_VER_INFO HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_VER_INFO)
#define HCI_OPCODE_READ_LOCAL_SUP_CMDS HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_SUP_CMDS)
#define HCI_OPCODE_READ_LOCAL_SUP_FEAT HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_SUP_FEAT)
#define HCI_OPCODE_READ_BUF_SIZE HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_BUF_SIZE)
#define HCI_OPCODE_READ_BD_ADDR HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_BD_ADDR)
#define HCI_OPCODE_READ_RSSI HCI_OPCODE(HCI_OGF_STATUS, HCI_OCF_READ_RSSI)
#define HCI_OPCODE_LE_SET_EVENT_MASK HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EVENT_MASK)
#define HCI_OPCODE_LE_READ_BUF_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_BUF_SIZE)
#define HCI_OPCODE_LE_READ_LOCAL_SUP_FEAT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_LOCAL_SUP_FEAT)
#define HCI_OPCODE_LE_SET_RAND_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_RAND_ADDR)
#define HCI_OPCODE_LE_SET_ADV_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_PARAM)
#define HCI_OPCODE_LE_READ_ADV_TX_POWER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_ADV_TX_POWER)
#define HCI_OPCODE_LE_SET_ADV_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_DATA)
#define HCI_OPCODE_LE_SET_SCAN_RESP_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_RESP_DATA)
#define HCI_OPCODE_LE_SET_ADV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_ENABLE)
#define HCI_OPCODE_LE_SET_SCAN_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_PARAM)
#define HCI_OPCODE_LE_SET_SCAN_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_ENABLE)
#define HCI_OPCODE_LE_CREATE_CONN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_CONN)
#define HCI_OPCODE_LE_CREATE_CONN_CANCEL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_CONN_CANCEL)
#define HCI_OPCODE_LE_READ_WHITE_LIST_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_WHITE_LIST_SIZE)
#define HCI_OPCODE_LE_CLEAR_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_WHITE_LIST)
#define HCI_OPCODE_LE_ADD_DEV_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ADD_DEV_WHITE_LIST)
#define HCI_OPCODE_LE_REMOVE_DEV_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_DEV_WHITE_LIST)
#define HCI_OPCODE_LE_CONN_UPDATE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CONN_UPDATE)
#define HCI_OPCODE_LE_SET_HOST_CHAN_CLASS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_HOST_CHAN_CLASS)
#define HCI_OPCODE_LE_READ_CHAN_MAP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_CHAN_MAP)
#define HCI_OPCODE_LE_READ_REMOTE_FEAT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_REMOTE_FEAT)
#define HCI_OPCODE_LE_ENCRYPT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ENCRYPT)
#define HCI_OPCODE_LE_RAND HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RAND)
#define HCI_OPCODE_LE_START_ENCRYPTION HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_START_ENCRYPTION)
#define HCI_OPCODE_LE_LTK_REQ_REPL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_LTK_REQ_REPL)
#define HCI_OPCODE_LE_LTK_REQ_NEG_REPL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_LTK_REQ_NEG_REPL)
#define HCI_OPCODE_LE_READ_SUP_STATES HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_SUP_STATES)
#define HCI_OPCODE_LE_RECEIVER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RECEIVER_TEST)
#define HCI_OPCODE_LE_TRANSMITTER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TRANSMITTER_TEST)
#define HCI_OPCODE_LE_TEST_END HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TEST_END)
/*! Command parameter lengths */
#define HCI_LEN_NOP 0
#define HCI_LEN_DISCONNECT 3
#define HCI_LEN_READ_REMOTE_VER_INFO 2
#define HCI_LEN_SET_EVENT_MASK 8
#define HCI_LEN_RESET 0
#define HCI_LEN_READ_TX_PWR_LVL 3
#define HCI_LEN_SET_CONTROLLER_TO_HOST_FC 1
#define HCI_LEN_HOST_BUFFER_SIZE 8
#define HCI_LEN_HOST_NUM_CMPL_PKTS 1
#define HCI_LEN_READ_LOCAL_VER_INFO 0
#define HCI_LEN_READ_LOCAL_SUP_CMDS 0
#define HCI_LEN_READ_LOCAL_SUP_FEAT 0
#define HCI_LEN_READ_BUF_SIZE 0
#define HCI_LEN_READ_BD_ADDR 0
#define HCI_LEN_READ_RSSI 2
#define HCI_LEN_LE_SET_EVENT_MASK 8
#define HCI_LEN_LE_READ_BUF_SIZE 0
#define HCI_LEN_LE_READ_LOCAL_SUP_FEAT 0
#define HCI_LEN_LE_SET_RAND_ADDR 6
#define HCI_LEN_LE_SET_ADV_PARAM 15
#define HCI_LEN_LE_READ_ADV_TX_POWER 0
#define HCI_LEN_LE_SET_ADV_DATA 32
#define HCI_LEN_LE_SET_SCAN_RESP_DATA 32
#define HCI_LEN_LE_SET_ADV_ENABLE 1
#define HCI_LEN_LE_SET_SCAN_PARAM 7
#define HCI_LEN_LE_SET_SCAN_ENABLE 2
#define HCI_LEN_LE_CREATE_CONN 25
#define HCI_LEN_LE_CREATE_CONN_CANCEL 0
#define HCI_LEN_LE_READ_WHITE_LIST_SIZE 0
#define HCI_LEN_LE_CLEAR_WHITE_LIST 0
#define HCI_LEN_LE_ADD_DEV_WHITE_LIST 7
#define HCI_LEN_LE_REMOVE_DEV_WHITE_LIST 7
#define HCI_LEN_LE_CONN_UPDATE 14
#define HCI_LEN_LE_SET_HOST_CHAN_CLASS 5
#define HCI_LEN_LE_READ_CHAN_MAP 2
#define HCI_LEN_LE_READ_REMOTE_FEAT 2
#define HCI_LEN_LE_ENCRYPT 32
#define HCI_LEN_LE_RAND 0
#define HCI_LEN_LE_START_ENCRYPTION 28
#define HCI_LEN_LE_LTK_REQ_REPL 18
#define HCI_LEN_LE_LTK_REQ_NEG_REPL 2
#define HCI_LEN_LE_READ_SUP_STATES 0
#define HCI_LEN_LE_RECEIVER_TEST 1
#define HCI_LEN_LE_TRANSMITTER_TEST 3
#define HCI_LEN_LE_TEST_END 0
/*! Events */
#define HCI_DISCONNECT_CMPL_EVT 0x05
#define HCI_ENC_CHANGE_EVT 0x08
#define HCI_READ_REMOTE_VER_INFO_CMPL_EVT 0x0C
#define HCI_CMD_CMPL_EVT 0x0E
#define HCI_CMD_STATUS_EVT 0x0F
#define HCI_HW_ERROR_EVT 0x10
#define HCI_NUM_CMPL_PKTS_EVT 0x13
#define HCI_DATA_BUF_OVERFLOW_EVT 0x1A
#define HCI_ENC_KEY_REFRESH_CMPL_EVT 0x30
#define HCI_LE_META_EVT 0x3E
#define HCI_VENDOR_SPEC_EVT 0xFF
/*! LE Subevents */
#define HCI_LE_CONN_CMPL_EVT 0x01
#define HCI_LE_ADV_REPORT_EVT 0x02
#define HCI_LE_CONN_UPDATE_CMPL_EVT 0x03
#define HCI_LE_READ_REMOTE_FEAT_CMPL_EVT 0x04
#define HCI_LE_LTK_REQ_EVT 0x05
/*! Event parameter lengths */
#define HCI_LEN_DISCONNECT_CMPL 4
#define HCI_LEN_ENC_CHANGE 5
#define HCI_LEN_LE_CONN_CMPL 19
#define HCI_LEN_LE_CONN_UPDATE_CMPL 9
#define HCI_LEN_LE_READ_REMOTE_FEAT_CMPL 12
#define HCI_LEN_LE_LTK_REQ 13
/*! Supported commands */
#define HCI_SUP_DISCONNECT 0x20 /*! Byte 0 */
#define HCI_SUP_READ_REMOTE_VER_INFO 0x80 /*! Byte 2 */
#define HCI_SUP_SET_EVENT_MASK 0x40 /*! Byte 5 */
#define HCI_SUP_RESET 0x80 /*! Byte 5 */
#define HCI_SUP_READ_TX_PWR_LVL 0x04 /*! Byte 10 */
#define HCI_SUP_SET_CONTROLLER_TO_HOST_FC 0x20 /*! Byte 10 */
#define HCI_SUP_HOST_BUFFER_SIZE 0x40 /*! Byte 10 */
#define HCI_SUP_HOST_NUM_CMPL_PKTS 0x80 /*! Byte 10 */
#define HCI_SUP_READ_LOCAL_VER_INFO 0x08 /*! Byte 14 */
#define HCI_SUP_READ_LOCAL_SUP_FEAT 0x20 /*! Byte 14 */
#define HCI_SUP_READ_BD_ADDR 0x02 /*! Byte 15 */
#define HCI_SUP_READ_RSSI 0x20 /*! Byte 15 */
#define HCI_SUP_LE_SET_EVENT_MASK 0x01 /*! Byte 25 */
#define HCI_SUP_LE_READ_BUF_SIZE 0x02 /*! Byte 25 */
#define HCI_SUP_LE_READ_LOCAL_SUP_FEAT 0x04 /*! Byte 25 */
#define HCI_SUP_LE_SET_RAND_ADDR 0x10 /*! Byte 25 */
#define HCI_SUP_LE_SET_ADV_PARAM 0x20 /*! Byte 25 */
#define HCI_SUP_LE_READ_ADV_TX_POWER 0x40 /*! Byte 25 */
#define HCI_SUP_LE_SET_ADV_DATA 0x80 /*! Byte 25 */
#define HCI_SUP_LE_SET_SCAN_RESP_DATA 0x01 /*! Byte 26 */
#define HCI_SUP_LE_SET_ADV_ENABLE 0x02 /*! Byte 26 */
#define HCI_SUP_LE_SET_SCAN_PARAM 0x04 /*! Byte 26 */
#define HCI_SUP_LE_SET_SCAN_ENABLE 0x08 /*! Byte 26 */
#define HCI_SUP_LE_CREATE_CONN 0x10 /*! Byte 26 */
#define HCI_SUP_LE_CREATE_CONN_CANCEL 0x20 /*! Byte 26 */
#define HCI_SUP_LE_READ_WHITE_LIST_SIZE 0x40 /*! Byte 26 */
#define HCI_SUP_LE_CLEAR_WHITE_LIST 0x80 /*! Byte 26 */
#define HCI_SUP_LE_ADD_DEV_WHITE_LIST 0x01 /*! Byte 27 */
#define HCI_SUP_LE_REMOVE_DEV_WHITE_LIST 0x02 /*! Byte 27 */
#define HCI_SUP_LE_CONN_UPDATE 0x04 /*! Byte 27 */
#define HCI_SUP_LE_SET_HOST_CHAN_CLASS 0x08 /*! Byte 27 */
#define HCI_SUP_LE_READ_CHAN_MAP 0x10 /*! Byte 27 */
#define HCI_SUP_LE_READ_REMOTE_FEAT 0x20 /*! Byte 27 */
#define HCI_SUP_LE_ENCRYPT 0x40 /*! Byte 27 */
#define HCI_SUP_LE_RAND 0x80 /*! Byte 27 */
#define HCI_SUP_LE_START_ENCRYPTION 0x01 /*! Byte 28 */
#define HCI_SUP_LE_LTK_REQ_REPL 0x02 /*! Byte 28 */
#define HCI_SUP_LE_LTK_REQ_NEG_REPL 0x04 /*! Byte 28 */
#define HCI_SUP_LE_READ_SUP_STATES 0x08 /*! Byte 28 */
#define HCI_SUP_LE_RECEIVER_TEST 0x10 /*! Byte 28 */
#define HCI_SUP_LE_TRANSMITTER_TEST 0x20 /*! Byte 28 */
#define HCI_SUP_LE_TEST_END 0x40 /*! Byte 28 */
/*! Event mask */
#define HCI_EVT_MASK_DISCONNECT_CMPL 0x10 /*! Byte 0 */
#define HCI_EVT_MASK_ENC_CHANGE 0x80 /*! Byte 0 */
#define HCI_EVT_MASK_READ_REMOTE_VER_INFO_CMPL 0x08 /*! Byte 1 */
#define HCI_EVT_MASK_HW_ERROR 0x80 /*! Byte 1 */
#define HCI_EVT_MASK_DATA_BUF_OVERFLOW 0x02 /*! Byte 3 */
#define HCI_EVT_MASK_ENC_KEY_REFRESH_CMPL 0x80 /*! Byte 5 */
#define HCI_EVT_MASK_LE_META 0x20 /*! Byte 7 */
/*! LE event mask */
#define HCI_EVT_MASK_LE_CONN_CMPL_EVT 0x01 /*! Byte 0 */
#define HCI_EVT_MASK_LE_ADV_REPORT_EVT 0x02 /*! Byte 0 */
#define HCI_EVT_MASK_LE_CONN_UPDATE_CMPL_EVT 0x04 /*! Byte 0 */
#define HCI_EVT_MASK_LE_READ_REMOTE_FEAT_CMPL_EVT 0x08 /*! Byte 0 */
#define HCI_EVT_MASK_LE_LTK_REQ_EVT 0x10 /*! Byte 0 */
/*! LE supported features */
#define HCI_LE_SUP_FEAT_ENCRYPTION 0x01
/*! Advertising command parameters */
#define HCI_ADV_MIN_INTERVAL 0x0020 /*! Minimum advertising interval */
#define HCI_ADV_NONCONN_MIN_INTERVAL 0x00A0 /*! Minimum nonconnectable adv. interval */
#define HCI_ADV_MAX_INTERVAL 0x4000 /*! Maximum advertising interval */
#define HCI_ADV_TYPE_CONN_UNDIRECT 0x00 /*! Connectable undirected advertising */
#define HCI_ADV_TYPE_CONN_DIRECT 0x01 /*! Connectable directed advertising */
#define HCI_ADV_TYPE_DISC_UNDIRECT 0x02 /*! Discoverable undirected advertising */
#define HCI_ADV_TYPE_NONCONN_UNDIRECT 0x03 /*! Nonconnectable undirected advertising */
#define HCI_ADV_CHAN_37 0x01 /*! Advertising channel 37 */
#define HCI_ADV_CHAN_38 0x02 /*! Advertising channel 38 */
#define HCI_ADV_CHAN_39 0x04 /*! Advertising channel 39 */
#define HCI_ADV_FILT_NONE 0x00 /*! No scan request or connection filtering */
#define HCI_ADV_FILT_SCAN 0x01 /*! White list filters scan requests */
#define HCI_ADV_FILT_CONN 0x02 /*! White list filters connections */
#define HCI_ADV_FILT_ALL 0x03 /*! White list filters scan req. and conn. */
/*! Scan command parameters */
#define HCI_SCAN_TYPE_PASSIVE 0 /*! Passive scan */
#define HCI_SCAN_TYPE_ACTIVE 1 /*! Active scan */
#define HCI_SCAN_INTERVAL_MIN 0x0004 /*! Minimum scan interval */
#define HCI_SCAN_INTERVAL_MAX 0x4000 /*! Maximum scan interval */
#define HCI_SCAN_INTERVAL_DEFAULT 0x0010 /*! Default scan interval */
#define HCI_SCAN_WINDOW_MIN 0x0004 /*! Minimum scan window */
#define HCI_SCAN_WINDOW_MAX 0x4000 /*! Maximum scan window */
#define HCI_SCAN_WINDOW_DEFAULT 0x0010 /*! Default scan window */
/*! Connection command parameters */
#define HCI_CONN_INTERVAL_MIN 0x0006 /*! Minimum connection interval */
#define HCI_CONN_INTERVAL_MAX 0x0C80 /*! Maximum connection interval */
#define HCI_CONN_LATENCY_MAX 0x01F3 /*! Maximum connection latency */
#define HCI_SUP_TIMEOUT_MIN 0x000A /*! Minimum supervision timeout */
#define HCI_SUP_TIMEOUT_MAX 0x0C80 /*! Maximum supervision timeout */
/*! Connection event parameters */
#define HCI_ROLE_MASTER 0 /*! Role is master */
#define HCI_ROLE_SLAVE 1 /*! Role is slave */
#define HCI_CLOCK_500PPM 0x00 /*! 500 ppm clock accuracy */
#define HCI_CLOCK_250PPM 0x01 /*! 250 ppm clock accuracy */
#define HCI_CLOCK_150PPM 0x02 /*! 150 ppm clock accuracy */
#define HCI_CLOCK_100PPM 0x03 /*! 100 ppm clock accuracy */
#define HCI_CLOCK_75PPM 0x04 /*! 75 ppm clock accuracy */
#define HCI_CLOCK_50PPM 0x05 /*! 50 ppm clock accuracy */
#define HCI_CLOCK_30PPM 0x06 /*! 30 ppm clock accuracy */
#define HCI_CLOCK_20PPM 0x07 /*! 20 ppm clock accuracy */
/*! Advertising report event parameters */
#define HCI_ADV_CONN_UNDIRECT 0x00 /*! Connectable undirected advertising */
#define HCI_ADV_CONN_DIRECT 0x01 /*! Connectable directed advertising */
#define HCI_ADV_DISC_UNDIRECT 0x02 /*! Discoverable undirected advertising */
#define HCI_ADV_NONCONN_UNDIRECT 0x03 /*! Non-connectable undirected advertising */
#define HCI_ADV_SCAN_RESPONSE 0x04 /*! Scan response */
/*! Misc command parameters */
#define HCI_READ_TX_PWR_CURRENT 0 /*! Read current tx power */
#define HCI_READ_TX_PWR_MAX 1 /*! Read maximum tx power */
#define HCI_TX_PWR_MIN -30 /*! Minimum tx power dBm */
#define HCI_TX_PWR_MAX 20 /*! Maximum tx power dBm */
#define HCI_VERSION 6 /*! HCI specification version */
#define HCI_RSSI_MIN -127 /*! Minimum RSSI dBm */
#define HCI_RSSI_MAX 20 /*! Maximum RSSI dBm */
#define HCI_ADDR_TYPE_PUBLIC 0 /*! Public device address */
#define HCI_ADDR_TYPE_RANDOM 1 /*! Random device address */
#define HCI_FILT_NONE 0 /*! No white list filtering */
#define HCI_FILT_WHITE_LIST 1 /*! White list filtering */
#define HCI_ROLE_MASTER 0 /*! Role is master */
#define HCI_ROLE_SLAVE 1 /*! Role is slave */
/*! Parameter lengths */
#define HCI_EVT_MASK_LEN 8 /*! Length of event mask byte array */
#define HCI_LE_EVT_MASK_LEN 8 /*! Length of LE event mask byte array */
#define HCI_FEAT_LEN 8 /*! Length of features byte array */
#define HCI_ADV_DATA_LEN 31 /*! Length of advertising data */
#define HCI_SCAN_DATA_LEN 31 /*! Length of scan response data */
#define HCI_CHAN_MAP_LEN 5 /*! Length of channel map byte array */
#define HCI_KEY_LEN 16 /*! Length of encryption key */
#define HCI_ENCRYPT_DATA_LEN 16 /*! Length of data used in encryption */
#define HCI_RAND_LEN 8 /*! Length of random number */
#define HCI_LE_STATES_LEN 8 /*! Length of LE states byte array */
/*! Wicentric company ID */
#define HCI_ID_WICENTRIC 0x005F
#ifdef __cplusplus
};
#endif
#endif /* HCI_DEFS_H */