/**
 * \file
 *
 * \brief SAM External Interrupt Driver
 *
 * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */
#include "extint.h"
#include "extint_callback.h"

/**
 * \internal
 * Internal driver device instance struct, declared in the main module driver.
 */
extern struct _extint_module _extint_dev;

/**
 * \internal
 * This is the number of the channel whose callback is currently running.
 */
uint8_t _current_channel;

/**
 * \brief Registers an asynchronous callback function with the driver.
 *
 * Registers an asynchronous callback with the EXTINT driver, fired when a
 * channel detects the configured channel detection criteria
 * (e.g. edge or level). Callbacks are fired once for each detected channel.
 *
 * \note NMI channel callbacks cannot be registered via this function; the
 *       device's NMI interrupt should be hooked directly in the user
 *       application and the NMI flags manually cleared via
 *       \ref extint_nmi_clear_detected().
 *
 * \param[in] callback  Pointer to the callback function to register
 * \param[in] channel   Logical channel to register callback for
 * \param[in] type      Type of callback function to register
 *
 * \return Status of the registration operation.
 * \retval STATUS_OK               The callback was registered successfully
 * \retval STATUS_ERR_INVALID_ARG  If an invalid callback type was supplied
 * \retval STATUS_ERR_ALREADY_INITIALIZED    Callback function has been
 *                                  registered, need unregister first
 */
enum status_code extint_register_callback(
    const extint_callback_t callback,
    const uint8_t channel,
    const enum extint_callback_type type)
{
    /* Sanity check arguments */
    Assert(callback);

    if (type != EXTINT_CALLBACK_TYPE_DETECT) {
        Assert(false);
        return STATUS_ERR_INVALID_ARG;
    }

    if (_extint_dev.callbacks[channel] == NULL) {
        _extint_dev.callbacks[channel] = callback;
        return STATUS_OK;
    } else if (_extint_dev.callbacks[channel] == callback) {
        return STATUS_OK;
    }

    return STATUS_ERR_ALREADY_INITIALIZED;
}

/**
 * \brief Unregisters an asynchronous callback function with the driver.
 *
 * Unregisters an asynchronous callback with the EXTINT driver, removing it
 * from the internal callback registration table.
 *
 * \param[in] callback  Pointer to the callback function to unregister
 * \param[in] channel   Logical channel to unregister callback for
 * \param[in] type      Type of callback function to unregister
 *
 * \return Status of the de-registration operation.
 * \retval STATUS_OK               The callback was Unregistered successfully
 * \retval STATUS_ERR_INVALID_ARG  If an invalid callback type was supplied
 * \retval STATUS_ERR_BAD_ADDRESS  No matching entry was found in the
 *                                 registration table
 */
enum status_code extint_unregister_callback(
    const extint_callback_t callback,
    const uint8_t channel,
    const enum extint_callback_type type)
{
    /* Sanity check arguments */
    Assert(callback);

    if (type != EXTINT_CALLBACK_TYPE_DETECT) {
        Assert(false);
        return STATUS_ERR_INVALID_ARG;
    }

    if (_extint_dev.callbacks[channel] == callback) {
        _extint_dev.callbacks[channel] = NULL;
        return STATUS_OK;
    }

    return STATUS_ERR_BAD_ADDRESS;
}

/**
 * \brief Enables asynchronous callback generation for a given channel and type.
 *
 * Enables asynchronous callbacks for a given logical external interrupt channel
 * and type. This must be called before an external interrupt channel will
 * generate callback events.
 *
 * \param[in] channel  Logical channel to enable callback generation for
 * \param[in] type     Type of callback function callbacks to enable
 *
 * \return Status of the callback enable operation.
 * \retval STATUS_OK               The callback was enabled successfully
 * \retval STATUS_ERR_INVALID_ARG  If an invalid callback type was supplied
 */
enum status_code extint_chan_enable_callback(
    const uint8_t channel,
    const enum extint_callback_type type)
{
    if (type == EXTINT_CALLBACK_TYPE_DETECT) {
        Eic *const eic = _extint_get_eic_from_channel(channel);

        eic->INTENSET.reg = (1UL << channel);
    } else {
        Assert(false);
        return STATUS_ERR_INVALID_ARG;
    }

    return STATUS_OK;
}

/**
 * \brief Disables asynchronous callback generation for a given channel and type.
 *
 * Disables asynchronous callbacks for a given logical external interrupt
 * channel and type.
 *
 * \param[in] channel  Logical channel to disable callback generation for
 * \param[in] type     Type of callback function callbacks to disable
 *
 * \return Status of the callback disable operation.
 * \retval STATUS_OK               The callback was disabled successfully
 * \retval STATUS_ERR_INVALID_ARG  If an invalid callback type was supplied
 */
enum status_code extint_chan_disable_callback(
    const uint8_t channel,
    const enum extint_callback_type type)
{
    if (type == EXTINT_CALLBACK_TYPE_DETECT) {
        Eic *const eic = _extint_get_eic_from_channel(channel);

        eic->INTENCLR.reg = (1UL << channel);
    } else {
        Assert(false);
        return STATUS_ERR_INVALID_ARG;
    }

    return STATUS_OK;
}

/**
 * \brief Find what channel caused the callback.
 *
 * Can be used in an EXTINT callback function to find what channel caused
 * the callback in case same callback is used by multiple channels.
 *
 * \return Channel number.
 */
uint8_t extint_get_current_channel(void)
{
    return _current_channel;
}

/** Handler for the EXTINT hardware module interrupt. */
void EIC_Handler(void)
{
    /* Find any triggered channels, run associated callback handlers */
    for (_current_channel = 0; _current_channel < EIC_NUMBER_OF_INTERRUPTS ; _current_channel++) {
        if (extint_chan_is_detected(_current_channel)) {
            /* Clear flag */
            extint_chan_clear_detected(_current_channel);
            /* Find any associated callback entries in the callback table */
            if (_extint_dev.callbacks[_current_channel] != NULL) {
                /* Run the registered callback */
                _extint_dev.callbacks[_current_channel]();
            }
        }
    }
}