/**
 * \file
 *
 * \brief Real-Time Clock (RTC) driver for SAM.
 *
 * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#ifndef RTC_H_INCLUDED
#define RTC_H_INCLUDED

#include  "compiler.h"

/// @cond 0
/**INDENT-OFF**/
#ifdef __cplusplus
extern "C" {
#endif
/**INDENT-ON**/
/// @endcond

    void rtc_set_hour_mode(Rtc *p_rtc, uint32_t ul_mode);
    uint32_t rtc_get_hour_mode(Rtc *p_rtc);
    void rtc_enable_interrupt(Rtc *p_rtc, uint32_t ul_sources);
    void rtc_disable_interrupt(Rtc *p_rtc, uint32_t ul_sources);
    uint32_t rtc_get_interrupt_mask(Rtc *p_rtc);
    void rtc_get_time(Rtc *p_rtc, uint32_t *pul_hour, uint32_t *pul_minute,
                      uint32_t *pul_second);
    uint32_t rtc_set_time(Rtc *p_rtc, uint32_t ul_hour, uint32_t ul_minute,
                          uint32_t ul_second);
    uint32_t rtc_set_time_alarm(Rtc *p_rtc,
                                uint32_t ul_hour_flag, uint32_t ul_hour,
                                uint32_t ul_minute_flag, uint32_t ul_minute,
                                uint32_t ul_second_flag, uint32_t ul_second);
    void rtc_get_date(Rtc *p_rtc, uint32_t *pul_year, uint32_t *pul_month,
                      uint32_t *pul_day, uint32_t *pul_week);
    uint32_t rtc_set_date(Rtc *p_rtc, uint32_t ul_year, uint32_t ul_month,
                          uint32_t ul_day, uint32_t ul_week);
    uint32_t rtc_set_date_alarm(Rtc *p_rtc,
                                uint32_t ul_month_flag, uint32_t ul_month,
                                uint32_t ul_day_flag, uint32_t ul_day);
    void rtc_clear_time_alarm(Rtc *p_rtc);
    void rtc_clear_date_alarm(Rtc *p_rtc);
    uint32_t rtc_get_status(Rtc *p_rtc);
    void rtc_clear_status(Rtc *p_rtc, uint32_t ul_clear);
    uint32_t rtc_get_valid_entry(Rtc *p_rtc);
    void rtc_set_time_event(Rtc *p_rtc, uint32_t ul_selection);
    void rtc_set_calendar_event(Rtc *p_rtc, uint32_t ul_selection);

#if ((SAM3S8) || (SAM3SD8) || (SAM4S) || (SAM4N) || (SAM4C) || (SAMG) || (SAM4CP) || (SAM4CM))
    void rtc_set_calendar_mode(Rtc *p_rtc, uint32_t ul_mode);
    uint32_t rtc_get_calendar_mode(Rtc *p_rtc);
    void rtc_set_calibration(Rtc *p_rtc, uint32_t ul_direction_ppm,
                             uint32_t ul_correction, uint32_t ul_range_ppm);
#endif

#if ((SAM3S8) || (SAM3SD8) || (SAM4S) || (SAM4C) || (SAMG) || (SAM4CP) || (SAM4CM) || SAMV71 || SAMV70 || SAME70 || SAMS70)
    void rtc_set_waveform(Rtc *p_rtc, uint32_t ul_channel, uint32_t ul_value);
#if ((SAM3S8) || (SAM3SD8) || (SAM4S) || (SAM4C)|| (SAM4CP) || (SAM4CM) || SAMV71 || SAMV70 || SAME70 || SAMS70)
    void rtc_set_pulse_parameter(Rtc *p_rtc, uint32_t ul_time_high,
                                 uint32_t ul_period);
#endif
#endif

#if ((SAM3N) || (SAM3U) || (SAM3XA))
    void rtc_set_writeprotect(Rtc *p_rtc, uint32_t ul_enable);
#endif /* ((SAM3N) || (SAM3U) || (SAM3XA)) */

#if ((SAM4C) || (SAM4CP) || (SAM4CM))
    void rtc_get_tamper_time(Rtc *p_rtc, uint32_t *pul_hour, uint32_t *pul_minute,
                             uint32_t *pul_second, uint8_t reg_num);
    void rtc_get_tamper_date(Rtc *p_rtc, uint32_t *pul_year, uint32_t *pul_month,
                             uint32_t *pul_day, uint32_t *pul_week, uint8_t reg_num);
    uint32_t rtc_get_tamper_source(Rtc *p_rtc, uint8_t reg_num);
    uint32_t rtc_get_tamper_event_counter(Rtc *p_rtc);
    bool rtc_is_tamper_occur_in_backup_mode(Rtc *p_rtc, uint8_t reg_num);
#endif

#if (SAMG55)
    uint32_t rtc_get_milliseconds(Rtc *p_rtc);
#endif

    /**
     * \page sam_rtc_quickstart Quickstart guide for SAM RTC driver
     *
     * This is the quickstart guide for the \ref rtc_group "SAM RTC driver",
     * with step-by-step instructions on how to configure and use the driver in a
     * selection of use cases.
     *
     * The use cases contain several code fragments. The code fragments in the
     * steps for setup can be copied into a custom initialization function, while
     * the steps for usage can be copied into, e.g., the main application function.
     *
     * \section rtc_basic_use_case Basic use case
     * In this basic use case, the RTC module is using 32kHz external crystal and
     * configured for 24-hour mode. It will read the current date and time.
     *
     * \subsection sam_rtc_quickstart_prereq Prerequisites
     * -# \ref sysclk_group "System Clock Management (Sysclock)"
     *
     * \section rtc_basic_use_case_setup Setup steps
     * \subsection rtc_basic_use_case_setup_code Example code
     * Add to application C-file:
     * \code
    	   void rtc_setup(void)
    	   {
    	       pmc_switch_sclk_to_32kxtal(PMC_OSC_XTAL);

    	       while (!pmc_osc_is_ready_32kxtal());

    	       rtc_set_hour_mode(RTC, 0);
    	   }
    \endcode
     *
     * \subsection rtc_basic_use_case_setup_flow Workflow
     *   - \note Please make sure the external 32kHz crystal is available.
     * -# Enable the External 32K crystal :
     *   - \code pmc_switch_sclk_to_32kxtal(PMC_OSC_XTAL); \endcode
     * -# Wait for 32K crystal ready:
     *   - \code while (!pmc_osc_is_ready_32kxtal()); \endcode
     * -# Set default RTC configuration, 24-hour mode .
     *   - \code rtc_set_hour_mode(RTC, 0); \endcode
     *
     * \section rtc_basic_use_case_usage Usage steps
     * \subsection rtc_basic_use_case_usage_code Example code
     * Add to, e.g., main loop in application C-file:
     * \code
    	    uint32_t hour, minute, second;
    	    uint32_t year, month, day, week;

    	    rtc_get_time(RTC, &hour, &minute, &second);
    	    rtc_get_date(RTC, &year, &month, &day, &week);
    \endcode
     *
     * \subsection rtc_basic_use_case_usage_flow Workflow
     * -# Start Define the variables for the date and time:
     *   - \code uint32_t hour, minute, second; \endcode
     *   - \code uint32_t year, month, day, week; \endcode
     * -# Read current time:
     *   - \code rtc_get_time(RTC, &hour, &minute, &second); \endcode
     * -# Read current date:
     *   - \code rtc_get_date(RTC, &year, &month, &day, &week); \endcode
     *
     */

/// @cond 0
/**INDENT-OFF**/
#ifdef __cplusplus
}
#endif
/**INDENT-ON**/
/// @endcond

#endif /* RTC_H_INCLUDED */