/*
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _FSL_SPDIF_H_
#define _FSL_SPDIF_H_

#include "fsl_common.h"

/*!
 * @addtogroup spdif
 * @{
 */

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*! @name Driver version */
/*@{*/
#define FSL_SPDIF_DRIVER_VERSION (MAKE_VERSION(2, 0, 2)) /*!< Version 2.0.2 */
/*@}*/

/*! @brief SPDIF return status*/
enum _spdif_status_t
{
    kStatus_SPDIF_RxDPLLLocked     = MAKE_STATUS(kStatusGroup_SPDIF, 0), /*!< SPDIF Rx PLL locked. */
    kStatus_SPDIF_TxFIFOError      = MAKE_STATUS(kStatusGroup_SPDIF, 1), /*!< SPDIF Tx FIFO error. */
    kStatus_SPDIF_TxFIFOResync     = MAKE_STATUS(kStatusGroup_SPDIF, 2), /*!< SPDIF Tx left and right FIFO resync. */
    kStatus_SPDIF_RxCnew           = MAKE_STATUS(kStatusGroup_SPDIF, 3), /*!< SPDIF Rx status channel value updated. */
    kStatus_SPDIF_ValidatyNoGood   = MAKE_STATUS(kStatusGroup_SPDIF, 4), /*!< SPDIF validaty flag not good. */
    kStatus_SPDIF_RxIllegalSymbol  = MAKE_STATUS(kStatusGroup_SPDIF, 5), /*!< SPDIF Rx receive illegal symbol. */
    kStatus_SPDIF_RxParityBitError = MAKE_STATUS(kStatusGroup_SPDIF, 6), /*!< SPDIF Rx parity bit error. */
    kStatus_SPDIF_UChannelOverrun  = MAKE_STATUS(kStatusGroup_SPDIF, 7), /*!< SPDIF receive U channel overrun. */
    kStatus_SPDIF_QChannelOverrun  = MAKE_STATUS(kStatusGroup_SPDIF, 8), /*!< SPDIF receive Q channel overrun. */
    kStatus_SPDIF_UQChannelSync    = MAKE_STATUS(kStatusGroup_SPDIF, 9), /*!< SPDIF U/Q channel sync found. */
    kStatus_SPDIF_UQChannelFrameError = MAKE_STATUS(kStatusGroup_SPDIF, 10), /*!< SPDIF U/Q channel frame error. */
    kStatus_SPDIF_RxFIFOError         = MAKE_STATUS(kStatusGroup_SPDIF, 11), /*!< SPDIF Rx FIFO error. */
    kStatus_SPDIF_RxFIFOResync = MAKE_STATUS(kStatusGroup_SPDIF, 12), /*!< SPDIF Rx left and right FIFO resync. */
    kStatus_SPDIF_LockLoss     = MAKE_STATUS(kStatusGroup_SPDIF, 13), /*!< SPDIF Rx PLL clock lock loss. */
    kStatus_SPDIF_TxIdle       = MAKE_STATUS(kStatusGroup_SPDIF, 14), /*!< SPDIF Tx is idle */
    kStatus_SPDIF_RxIdle       = MAKE_STATUS(kStatusGroup_SPDIF, 15), /*!< SPDIF Rx is idle */
    kStatus_SPDIF_QueueFull    = MAKE_STATUS(kStatusGroup_SPDIF, 16)  /*!< SPDIF queue full */
};

/*! @brief SPDIF Rx FIFO full falg select, it decides when assert the rx full flag */
typedef enum _spdif_rxfull_select
{
    kSPDIF_RxFull1Sample = 0x0u, /*!< Rx full at least 1 sample in left and right FIFO */
    kSPDIF_RxFull4Samples,       /*!< Rx full at least 4 sample in left and right FIFO*/
    kSPDIF_RxFull8Samples,       /*!< Rx full at least 8 sample in left and right FIFO*/
    kSPDIF_RxFull16Samples,      /*!< Rx full at least 16 sample in left and right FIFO*/
} spdif_rxfull_select_t;

/*! @brief SPDIF tx FIFO EMPTY falg select, it decides when assert the tx empty flag */
typedef enum _spdif_txempty_select
{
    kSPDIF_TxEmpty0Sample = 0x0u, /*!< Tx empty at most 0 sample in left and right FIFO */
    kSPDIF_TxEmpty4Samples,       /*!< Tx empty at most 4 sample in left and right FIFO*/
    kSPDIF_TxEmpty8Samples,       /*!< Tx empty at most 8 sample in left and right FIFO*/
    kSPDIF_TxEmpty12Samples,      /*!< Tx empty at most 12 sample in left and right FIFO*/
} spdif_txempty_select_t;

/*! @brief SPDIF U channel source */
typedef enum _spdif_uchannel_source
{
    kSPDIF_NoUChannel     = 0x0U, /*!< No embedded U channel */
    kSPDIF_UChannelFromRx = 0x1U, /*!< U channel from receiver, it is CD mode */
    kSPDIF_UChannelFromTx = 0x3U, /*!< U channel from on chip tx */
} spdif_uchannel_source_t;

/*! @brief SPDIF clock gain*/
typedef enum _spdif_gain_select
{
    kSPDIF_GAIN_24 = 0x0U, /*!< Gain select is 24 */
    kSPDIF_GAIN_16,        /*!< Gain select is 16 */
    kSPDIF_GAIN_12,        /*!< Gain select is 12 */
    kSPDIF_GAIN_8,         /*!< Gain select is 8 */
    kSPDIF_GAIN_6,         /*!< Gain select is 6 */
    kSPDIF_GAIN_4,         /*!< Gain select is 4 */
    kSPDIF_GAIN_3,         /*!< Gain select is 3 */
} spdif_gain_select_t;

/*! @brief SPDIF tx data source */
typedef enum _spdif_tx_source
{
    kSPDIF_txFromReceiver = 0x1U, /*!< Tx data directly through SPDIF receiver */
    kSPDIF_txNormal       = 0x5U, /*!< Normal operation, data from processor */
} spdif_tx_source_t;

/*! @brief SPDIF tx data source */
typedef enum _spdif_validity_config
{
    kSPDIF_validityFlagAlwaysSet = 0x0U, /*!< Outgoing validity flags always set */
    kSPDIF_validityFlagAlwaysClear,      /*!< Outgoing validity flags always clear */
} spdif_validity_config_t;

/*! @brief The SPDIF interrupt enable flag */
enum _spdif_interrupt_enable_t
{
    kSPDIF_RxDPLLLocked                   = SPDIF_SIE_LOCK_MASK,        /*!< SPDIF DPLL locked */
    kSPDIF_TxFIFOError                    = SPDIF_SIE_TXUNOV_MASK,      /*!< Tx FIFO underrun or overrun */
    kSPDIF_TxFIFOResync                   = SPDIF_SIE_TXRESYN_MASK,     /*!< Tx FIFO left and right channel resync */
    kSPDIF_RxControlChannelChange         = SPDIF_SIE_CNEW_MASK,        /*!< SPDIF Rx control channel value changed */
    kSPDIF_ValidityFlagNoGood             = SPDIF_SIE_VALNOGOOD_MASK,   /*!< SPDIF validity flag no good */
    kSPDIF_RxIllegalSymbol                = SPDIF_SIE_SYMERR_MASK,      /*!< SPDIF receiver found illegal symbol */
    kSPDIF_RxParityBitError               = SPDIF_SIE_BITERR_MASK,      /*!< SPDIF receiver found parity bit error */
    kSPDIF_UChannelReceiveRegisterFull    = SPDIF_SIE_URXFUL_MASK,      /*!< SPDIF U channel revceive register full */
    kSPDIF_UChannelReceiveRegisterOverrun = SPDIF_SIE_URXOV_MASK,       /*!< SPDIF U channel receive register overrun */
    kSPDIF_QChannelReceiveRegisterFull    = SPDIF_SIE_QRXFUL_MASK,      /*!< SPDIF Q channel receive reigster full */
    kSPDIF_QChannelReceiveRegisterOverrun = SPDIF_SIE_QRXOV_MASK,       /*!< SPDIF Q channel receive register overrun */
    kSPDIF_UQChannelSync                  = SPDIF_SIE_UQSYNC_MASK,      /*!< SPDIF U/Q channel sync found */
    kSPDIF_UQChannelFrameError            = SPDIF_SIE_UQERR_MASK,       /*!< SPDIF U/Q channel frame error */
    kSPDIF_RxFIFOError                    = SPDIF_SIE_RXFIFOUNOV_MASK,  /*!< SPDIF Rx FIFO underrun/overrun */
    kSPDIF_RxFIFOResync                   = SPDIF_SIE_RXFIFORESYN_MASK, /*!< SPDIF Rx left and right FIFO resync */
    kSPDIF_LockLoss                       = SPDIF_SIE_LOCKLOSS_MASK,    /*!< SPDIF receiver loss of lock */
    kSPDIF_TxFIFOEmpty                    = SPDIF_SIE_TXEM_MASK,        /*!< SPDIF Tx FIFO empty */
    kSPDIF_RxFIFOFull                     = SPDIF_SIE_RXFIFOFUL_MASK    /*!< SPDIF Rx FIFO full */
};

/*! @brief The DMA request sources */
enum _spdif_dma_enable_t
{
    kSPDIF_RxDMAEnable = SPDIF_SCR_DMA_RX_EN_MASK, /*!< Rx FIFO full */
    kSPDIF_TxDMAEnable = SPDIF_SCR_DMA_TX_EN_MASK, /*!< Tx FIFO empty */
};

/*! @brief SPDIF user configuration structure */
typedef struct _spdif_config
{
    bool isTxAutoSync;                      /*!< If auto sync mechanism open */
    bool isRxAutoSync;                      /*!< If auto sync mechanism open */
    uint8_t DPLLClkSource;                  /*!< SPDIF DPLL clock source, range from 0~15, meaning is chip-specific */
    uint8_t txClkSource;                    /*!< SPDIF tx clock source, range from 0~7, meaning is chip-specific */
    spdif_rxfull_select_t rxFullSelect;     /*!< SPDIF rx buffer full select */
    spdif_txempty_select_t txFullSelect;    /*!< SPDIF tx buffer empty select */
    spdif_uchannel_source_t uChannelSrc;    /*!< U channel source */
    spdif_tx_source_t txSource;             /*!< SPDIF tx data source */
    spdif_validity_config_t validityConfig; /*!< Validity flag config */
    spdif_gain_select_t gain;               /*!< Rx receive clock measure gain parameter. */
} spdif_config_t;

/*!@brief SPDIF transfer queue size, user can refine it according to use case. */
#define SPDIF_XFER_QUEUE_SIZE (4)

/*! @brief SPDIF transfer structure */
typedef struct _spdif_transfer
{
    uint8_t *data;   /*!< Data start address to transfer. */
    uint8_t *qdata;  /*!< Data buffer for Q channel */
    uint8_t *udata;  /*!< Data buffer for C channel */
    size_t dataSize; /*!< Transfer size. */
} spdif_transfer_t;

typedef struct _spdif_handle spdif_handle_t;

/*! @brief SPDIF transfer callback prototype */
typedef void (*spdif_transfer_callback_t)(SPDIF_Type *base, spdif_handle_t *handle, status_t status, void *userData);

/*! @brief SPDIF handle structure */
struct _spdif_handle
{
    uint32_t state;                                     /*!< Transfer status */
    spdif_transfer_callback_t callback;                 /*!< Callback function called at transfer event*/
    void *userData;                                     /*!< Callback parameter passed to callback function*/
    spdif_transfer_t spdifQueue[SPDIF_XFER_QUEUE_SIZE]; /*!< Transfer queue storing queued transfer */
    size_t transferSize[SPDIF_XFER_QUEUE_SIZE];         /*!< Data bytes need to transfer */
    volatile uint8_t queueUser;                         /*!< Index for user to queue transfer */
    volatile uint8_t queueDriver;                       /*!< Index for driver to get the transfer data and size */
    uint8_t watermark;                                  /*!< Watermark value */
};

/*******************************************************************************
 * API
 ******************************************************************************/

#if defined(__cplusplus)
extern "C" {
#endif /*_cplusplus*/

/*!
 * @name Initialization and deinitialization
 * @{
 */

/*!
 * @brief Initializes the SPDIF peripheral.
 *
 * Ungates the SPDIF clock, resets the module, and configures SPDIF with a configuration structure.
 * The configuration structure can be custom filled or set with default values by
 * SPDIF_GetDefaultConfig().
 *
 * @note  This API should be called at the beginning of the application to use
 * the SPDIF driver. Otherwise, accessing the SPDIF module can cause a hard fault
 * because the clock is not enabled.
 *
 * @param base SPDIF base pointer
 * @param config SPDIF configuration structure.
 */
void SPDIF_Init(SPDIF_Type *base, const spdif_config_t *config);

/*!
 * @brief  Sets the SPDIF configuration structure to default values.
 *
 * This API initializes the configuration structure for use in SPDIF_Init.
 * The initialized structure can remain unchanged in SPDIF_Init, or it can be modified
 *  before calling SPDIF_Init.
 * This is an example.
   @code
   spdif_config_t config;
   SPDIF_GetDefaultConfig(&config);
   @endcode
 *
 * @param config pointer to master configuration structure
 */
void SPDIF_GetDefaultConfig(spdif_config_t *config);

/*!
 * @brief De-initializes the SPDIF peripheral.
 *
 * This API gates the SPDIF clock. The SPDIF module can't operate unless SPDIF_Init is called to enable the clock.
 *
 * @param base SPDIF base pointer
 */
void SPDIF_Deinit(SPDIF_Type *base);

/*!
 * @brief Resets the SPDIF Tx.
 *
 * This function makes Tx FIFO in reset mode.
 *
 * @param base SPDIF base pointer
 */
static inline void SPDIF_TxFIFOReset(SPDIF_Type *base)
{
    base->SCR |= SPDIF_SCR_RXFIFO_RST_MASK;
}

/*!
 * @brief Resets the SPDIF Rx.
 *
 * This function enables the software reset and FIFO reset of SPDIF Rx. After reset, clear the reset bit.
 *
 * @param base SPDIF base pointer
 */
static inline void SPDIF_RxFIFOReset(SPDIF_Type *base)
{
    base->SCR |= SPDIF_SCR_RXFIFO_RST_MASK;
}

/*!
 * @brief Enables/disables the SPDIF Tx.
 *
 * @param base SPDIF base pointer
 * @param enable True means enable SPDIF Tx, false means disable.
 */
void SPDIF_TxEnable(SPDIF_Type *base, bool enable);

/*!
 * @brief Enables/disables the SPDIF Rx.
 *
 * @param base SPDIF base pointer
 * @param enable True means enable SPDIF Rx, false means disable.
 */
static inline void SPDIF_RxEnable(SPDIF_Type *base, bool enable)
{
    if (enable)
    {
        /* Open Rx FIFO */
        base->SCR &= ~(SPDIF_SCR_RXFIFO_CTRL_MASK | SPDIF_SCR_RXFIFO_OFF_ON_MASK);
    }
    else
    {
        base->SCR |= SPDIF_SCR_RXFIFO_OFF_ON_MASK;
    }
}

/*! @} */

/*!
 * @name Status
 * @{
 */

/*!
 * @brief Gets the SPDIF status flag state.
 *
 * @param base SPDIF base pointer
 * @return SPDIF status flag value. Use the _spdif_interrupt_enable_t to get the status value needed.
 */
static inline uint32_t SPDIF_GetStatusFlag(SPDIF_Type *base)
{
    return base->SIS;
}

/*!
 * @brief Clears the SPDIF status flag state.
 *
 * @param base SPDIF base pointer
 * @param mask State mask. It can be a combination of the _spdif_interrupt_enable_t member. Notice these members
 *             cannot be included, as these flags cannot be cleared by writing 1 to these bits:
 *        @arg kSPDIF_UChannelReceiveRegisterFull
 *        @arg kSPDIF_QChannelReceiveRegisterFull
 *        @arg kSPDIF_TxFIFOEmpty
 *        @arg kSPDIF_RxFIFOFull
 */
static inline void SPDIF_ClearStatusFlags(SPDIF_Type *base, uint32_t mask)
{
    base->SIC = mask;
}

/*! @} */

/*!
 * @name Interrupts
 * @{
 */

/*!
 * @brief Enables the SPDIF Tx interrupt requests.
 *
 * @param base SPDIF base pointer
 * @param mask interrupt source
 *     The parameter can be a combination of the following sources if defined.
 *     @arg kSPDIF_WordStartInterruptEnable
 *     @arg kSPDIF_SyncErrorInterruptEnable
 *     @arg kSPDIF_FIFOWarningInterruptEnable
 *     @arg kSPDIF_FIFORequestInterruptEnable
 *     @arg kSPDIF_FIFOErrorInterruptEnable
 */
static inline void SPDIF_EnableInterrupts(SPDIF_Type *base, uint32_t mask)
{
    base->SIE |= mask;
}

/*!
 * @brief Disables the SPDIF Tx interrupt requests.
 *
 * @param base SPDIF base pointer
 * @param mask interrupt source
 *     The parameter can be a combination of the following sources if defined.
 *     @arg kSPDIF_WordStartInterruptEnable
 *     @arg kSPDIF_SyncErrorInterruptEnable
 *     @arg kSPDIF_FIFOWarningInterruptEnable
 *     @arg kSPDIF_FIFORequestInterruptEnable
 *     @arg kSPDIF_FIFOErrorInterruptEnable
 */
static inline void SPDIF_DisableInterrupts(SPDIF_Type *base, uint32_t mask)
{
    base->SIE &= ~mask;
}

/*! @} */

/*!
 * @name DMA Control
 * @{
 */

/*!
 * @brief Enables/disables the SPDIF DMA requests.
 * @param base SPDIF base pointer
 * @param mask SPDIF DMA enable mask, The parameter can be a combination of the following sources if defined
 *      @arg kSPDIF_RxDMAEnable
 *      @arg kSPDIF_TxDMAEnable
 * @param enable True means enable DMA, false means disable DMA.
 */
static inline void SPDIF_EnableDMA(SPDIF_Type *base, uint32_t mask, bool enable)
{
    if (enable)
    {
        base->SCR |= mask;
    }
    else
    {
        base->SCR &= ~mask;
    }
}

/*!
 * @brief  Gets the SPDIF Tx left data register address.
 *
 * This API is used to provide a transfer address for the SPDIF DMA transfer configuration.
 *
 * @param base SPDIF base pointer.
 * @return data register address.
 */
static inline uint32_t SPDIF_TxGetLeftDataRegisterAddress(SPDIF_Type *base)
{
    return (uint32_t)(&(base->STL));
}

/*!
 * @brief  Gets the SPDIF Tx right data register address.
 *
 * This API is used to provide a transfer address for the SPDIF DMA transfer configuration.
 *
 * @param base SPDIF base pointer.
 * @return data register address.
 */
static inline uint32_t SPDIF_TxGetRightDataRegisterAddress(SPDIF_Type *base)
{
    return (uint32_t)(&(base->STR));
}

/*!
 * @brief  Gets the SPDIF Rx left data register address.
 *
 * This API is used to provide a transfer address for the SPDIF DMA transfer configuration.
 *
 * @param base SPDIF base pointer.
 * @return data register address.
 */
static inline uint32_t SPDIF_RxGetLeftDataRegisterAddress(SPDIF_Type *base)
{
    return (uint32_t)(&(base->SRL));
}

/*!
 * @brief  Gets the SPDIF Rx right data register address.
 *
 * This API is used to provide a transfer address for the SPDIF DMA transfer configuration.
 *
 * @param base SPDIF base pointer.
 * @return data register address.
 */
static inline uint32_t SPDIF_RxGetRightDataRegisterAddress(SPDIF_Type *base)
{
    return (uint32_t)(&(base->SRR));
}

/*! @} */

/*!
 * @name Bus Operations
 * @{
 */

/*!
 * @brief Configures the SPDIF Tx sample rate.
 *
 * The audio format can be changed at run-time. This function configures the sample rate.
 *
 * @param base SPDIF base pointer.
 * @param sampleRate_Hz SPDIF sample rate frequency in Hz.
 * @param sourceClockFreq_Hz SPDIF tx clock source frequency in Hz.
 */
void SPDIF_TxSetSampleRate(SPDIF_Type *base, uint32_t sampleRate_Hz, uint32_t sourceClockFreq_Hz);

/*!
 * @brief Configures the SPDIF Rx audio format.
 *
 * The audio format can be changed at run-time. This function configures the sample rate and audio data
 * format to be transferred.
 *
 * @param base SPDIF base pointer.
 * @param clockSourceFreq_Hz SPDIF system clock frequency in hz.
 */
uint32_t SPDIF_GetRxSampleRate(SPDIF_Type *base, uint32_t clockSourceFreq_Hz);

/*!
 * @brief Sends data using a blocking method.
 *
 * @note This function blocks by polling until data is ready to be sent.
 *
 * @param base SPDIF base pointer.
 * @param buffer Pointer to the data to be written.
 * @param size Bytes to be written.
 */
void SPDIF_WriteBlocking(SPDIF_Type *base, uint8_t *buffer, uint32_t size);

/*!
 * @brief Writes data into SPDIF FIFO.
 *
 * @param base SPDIF base pointer.
 * @param data Data needs to be written.
 */
static inline void SPDIF_WriteLeftData(SPDIF_Type *base, uint32_t data)
{
    base->STL = data;
}

/*!
 * @brief Writes data into SPDIF FIFO.
 *
 * @param base SPDIF base pointer.
 * @param data Data needs to be written.
 */
static inline void SPDIF_WriteRightData(SPDIF_Type *base, uint32_t data)
{
    base->STR = data;
}

/*!
 * @brief Writes data into SPDIF FIFO.
 *
 * @param base SPDIF base pointer.
 * @param data Data needs to be written.
 */
static inline void SPDIF_WriteChannelStatusHigh(SPDIF_Type *base, uint32_t data)
{
    base->STCSCH = data;
}

/*!
 * @brief Writes data into SPDIF FIFO.
 *
 * @param base SPDIF base pointer.
 * @param data Data needs to be written.
 */
static inline void SPDIF_WriteChannelStatusLow(SPDIF_Type *base, uint32_t data)
{
    base->STCSCL = data;
}

/*!
 * @brief Receives data using a blocking method.
 *
 * @note This function blocks by polling until data is ready to be sent.
 *
 * @param base SPDIF base pointer.
 * @param buffer Pointer to the data to be read.
 * @param size Bytes to be read.
 */
void SPDIF_ReadBlocking(SPDIF_Type *base, uint8_t *buffer, uint32_t size);

/*!
 * @brief Reads data from the SPDIF FIFO.
 *
 * @param base SPDIF base pointer.
 * @return Data in SPDIF FIFO.
 */
static inline uint32_t SPDIF_ReadLeftData(SPDIF_Type *base)
{
    return base->SRL;
}

/*!
 * @brief Reads data from the SPDIF FIFO.
 *.

 * @param base SPDIF base pointer.
 * @return Data in SPDIF FIFO.
 */
static inline uint32_t SPDIF_ReadRightData(SPDIF_Type *base)
{
    return base->SRR;
}

/*!
 * @brief Reads data from the SPDIF FIFO.
 *
 * @param base SPDIF base pointer.
 * @return Data in SPDIF FIFO.
 */
static inline uint32_t SPDIF_ReadChannelStatusHigh(SPDIF_Type *base)
{
    return base->SRCSH;
}

/*!
 * @brief Reads data from the SPDIF FIFO.
 *.

 * @param base SPDIF base pointer.
 * @return Data in SPDIF FIFO.
 */
static inline uint32_t SPDIF_ReadChannelStatusLow(SPDIF_Type *base)
{
    return base->SRCSL;
}

/*!
 * @brief Reads data from the SPDIF FIFO.
 *
 * @param base SPDIF base pointer.
 * @return Data in SPDIF FIFO.
 */
static inline uint32_t SPDIF_ReadQChannel(SPDIF_Type *base)
{
    return base->SRQ;
}

/*!
 * @brief Reads data from the SPDIF FIFO.
 *.

 * @param base SPDIF base pointer.
 * @return Data in SPDIF FIFO.
 */
static inline uint32_t SPDIF_ReadUChannel(SPDIF_Type *base)
{
    return base->SRU;
}

/*! @} */

/*!
 * @name Transactional
 * @{
 */

/*!
 * @brief Initializes the SPDIF Tx handle.
 *
 * This function initializes the Tx handle for the SPDIF Tx transactional APIs. Call
 * this function once to get the handle initialized.
 *
 * @param base SPDIF base pointer
 * @param handle SPDIF handle pointer.
 * @param callback Pointer to the user callback function.
 * @param userData User parameter passed to the callback function
 */
void SPDIF_TransferTxCreateHandle(SPDIF_Type *base,
                                  spdif_handle_t *handle,
                                  spdif_transfer_callback_t callback,
                                  void *userData);

/*!
 * @brief Initializes the SPDIF Rx handle.
 *
 * This function initializes the Rx handle for the SPDIF Rx transactional APIs. Call
 * this function once to get the handle initialized.
 *
 * @param base SPDIF base pointer.
 * @param handle SPDIF handle pointer.
 * @param callback Pointer to the user callback function.
 * @param userData User parameter passed to the callback function.
 */
void SPDIF_TransferRxCreateHandle(SPDIF_Type *base,
                                  spdif_handle_t *handle,
                                  spdif_transfer_callback_t callback,
                                  void *userData);

/*!
 * @brief Performs an interrupt non-blocking send transfer on SPDIF.
 *
 * @note This API returns immediately after the transfer initiates.
 * Call the SPDIF_TxGetTransferStatusIRQ to poll the transfer status and check whether
 * the transfer is finished. If the return status is not kStatus_SPDIF_Busy, the transfer
 * is finished.
 *
 * @param base SPDIF base pointer.
 * @param handle Pointer to the spdif_handle_t structure which stores the transfer state.
 * @param xfer Pointer to the spdif_transfer_t structure.
 * @retval kStatus_Success Successfully started the data receive.
 * @retval kStatus_SPDIF_TxBusy Previous receive still not finished.
 * @retval kStatus_InvalidArgument The input parameter is invalid.
 */
status_t SPDIF_TransferSendNonBlocking(SPDIF_Type *base, spdif_handle_t *handle, spdif_transfer_t *xfer);

/*!
 * @brief Performs an interrupt non-blocking receive transfer on SPDIF.
 *
 * @note This API returns immediately after the transfer initiates.
 * Call the SPDIF_RxGetTransferStatusIRQ to poll the transfer status and check whether
 * the transfer is finished. If the return status is not kStatus_SPDIF_Busy, the transfer
 * is finished.
 *
 * @param base SPDIF base pointer
 * @param handle Pointer to the spdif_handle_t structure which stores the transfer state.
 * @param xfer Pointer to the spdif_transfer_t structure.
 * @retval kStatus_Success Successfully started the data receive.
 * @retval kStatus_SPDIF_RxBusy Previous receive still not finished.
 * @retval kStatus_InvalidArgument The input parameter is invalid.
 */
status_t SPDIF_TransferReceiveNonBlocking(SPDIF_Type *base, spdif_handle_t *handle, spdif_transfer_t *xfer);

/*!
 * @brief Gets a set byte count.
 *
 * @param base SPDIF base pointer.
 * @param handle Pointer to the spdif_handle_t structure which stores the transfer state.
 * @param count Bytes count sent.
 * @retval kStatus_Success Succeed get the transfer count.
 * @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress.
 */
status_t SPDIF_TransferGetSendCount(SPDIF_Type *base, spdif_handle_t *handle, size_t *count);

/*!
 * @brief Gets a received byte count.
 *
 * @param base SPDIF base pointer.
 * @param handle Pointer to the spdif_handle_t structure which stores the transfer state.
 * @param count Bytes count received.
 * @retval kStatus_Success Succeed get the transfer count.
 * @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress.
 */
status_t SPDIF_TransferGetReceiveCount(SPDIF_Type *base, spdif_handle_t *handle, size_t *count);

/*!
 * @brief Aborts the current send.
 *
 * @note This API can be called any time when an interrupt non-blocking transfer initiates
 * to abort the transfer early.
 *
 * @param base SPDIF base pointer.
 * @param handle Pointer to the spdif_handle_t structure which stores the transfer state.
 */
void SPDIF_TransferAbortSend(SPDIF_Type *base, spdif_handle_t *handle);

/*!
 * @brief Aborts the current IRQ receive.
 *
 * @note This API can be called when an interrupt non-blocking transfer initiates
 * to abort the transfer early.
 *
 * @param base SPDIF base pointer
 * @param handle Pointer to the spdif_handle_t structure which stores the transfer state.
 */
void SPDIF_TransferAbortReceive(SPDIF_Type *base, spdif_handle_t *handle);

/*!
 * @brief Tx interrupt handler.
 *
 * @param base SPDIF base pointer.
 * @param handle Pointer to the spdif_handle_t structure.
 */
void SPDIF_TransferTxHandleIRQ(SPDIF_Type *base, spdif_handle_t *handle);

/*!
 * @brief Tx interrupt handler.
 *
 * @param base SPDIF base pointer.
 * @param handle Pointer to the spdif_handle_t structure.
 */
void SPDIF_TransferRxHandleIRQ(SPDIF_Type *base, spdif_handle_t *handle);

/*! @} */

#if defined(__cplusplus)
}
#endif /*_cplusplus*/

/*! @} */

#endif /* _FSL_SPDIF_H_ */