/*
** ###################################################################
**     Processor:           LPC54628J512ET180
**     Compilers:           Keil ARM C/C++ Compiler
**                          GNU C Compiler
**                          IAR ANSI C/C++ Compiler for ARM
**                          MCUXpresso Compiler
**
**     Reference manual:    LPC546xx User manual Rev.1.9  5 June 2017
**     Version:             rev. 1.2, 2017-06-08
**     Build:               b170609
**
**     Abstract:
**         Provides a system configuration function and a global variable that
**         contains the system frequency. It configures the device and initializes
**         the oscillator (PLL) that is part of the microcontroller device.
**
**     Copyright 2016 Freescale Semiconductor, Inc.
**     Copyright 2016-2017 NXP
**     Redistribution and use in source and binary forms, with or without modification,
**     are permitted provided that the following conditions are met:
**
**     1. Redistributions of source code must retain the above copyright notice, this list
**       of conditions and the following disclaimer.
**
**     2. Redistributions in binary form must reproduce the above copyright notice, this
**       list of conditions and the following disclaimer in the documentation and/or
**       other materials provided with the distribution.
**
**     3. Neither the name of the copyright holder nor the names of its
**       contributors may be used to endorse or promote products derived from this
**       software without specific prior written permission.
**
**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
**     http:                 www.nxp.com
**     mail:                 support@nxp.com
**
**     Revisions:
**     - rev. 1.0 (2016-08-12)
**         Initial version.
**     - rev. 1.1 (2016-11-25)
**         Update CANFD and Classic CAN register.
**         Add MAC TIMERSTAMP registers.
**     - rev. 1.2 (2017-06-08)
**         Remove RTC_CTRL_RTC_OSC_BYPASS.
**         SYSCON_ARMTRCLKDIV rename to SYSCON_ARMTRACECLKDIV.
**         Remove RESET and HALT from SYSCON_AHBCLKDIV.
**
** ###################################################################
*/

/*!
 * @file LPC54628
 * @version 1.2
 * @date 2017-06-08
 * @brief Device specific configuration file for LPC54628 (header file)
 *
 * Provides a system configuration function and a global variable that contains
 * the system frequency. It configures the device and initializes the oscillator
 * (PLL) that is part of the microcontroller device.
 */

#ifndef _SYSTEM_LPC54628_H_
#define _SYSTEM_LPC54628_H_                      /**< Symbol preventing repeated inclusion */

#ifdef __cplusplus
extern "C" {
#endif

#include <stdint.h>

#define DEFAULT_SYSTEM_CLOCK           12000000u           /* Default System clock value */
#define CLK_RTC_32K_CLK                   32768u           /* RTC oscillator 32 kHz output (32k_clk */
#define CLK_FRO_12MHZ                  12000000u           /* FRO 12 MHz (fro_12m) */
#define CLK_FRO_48MHZ                  48000000u           /* FRO 48 MHz (fro_48m) */
#define CLK_FRO_96MHZ                  96000000u           /* FRO 96 MHz (fro_96m) */
#define CLK_CLK_IN                            0u           /* Default CLK_IN pin clock */


/**
 * @brief System clock frequency (core clock)
 *
 * The system clock frequency supplied to the SysTick timer and the processor
 * core clock. This variable can be used by the user application to setup the
 * SysTick timer or configure other parameters. It may also be used by debugger to
 * query the frequency of the debug timer or configure the trace clock speed
 * SystemCoreClock is initialized with a correct predefined value.
 */
extern uint32_t SystemCoreClock;

/**
 * @brief Setup the microcontroller system.
 *
 * Typically this function configures the oscillator (PLL) that is part of the
 * microcontroller device. For systems with variable clock speed it also updates
 * the variable SystemCoreClock. SystemInit is called from startup_device file.
 */
void SystemInit (void);

/**
 * @brief Updates the SystemCoreClock variable.
 *
 * It must be called whenever the core clock is changed during program
 * execution. SystemCoreClockUpdate() evaluates the clock register settings and calculates
 * the current core clock.
 */
void SystemCoreClockUpdate (void);

#ifdef __cplusplus
}
#endif

#endif  /* _SYSTEM_LPC54628_H_ */