/* mbed Microcontroller Library
 * Copyright (c) 2006-2020 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/****************************************************************************
 *
 * Copyright 2020 Samsung Electronics All Rights Reserved.
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
 * either express or implied. See the License for the specific
 * language governing permissions and limitations under the License.
 *
 ****************************************************************************/
/* @file  : system_core_s5js100.h
 * @brief : System core configuration header
 * @date  : June 2019
 *
 * @note  : Add system mode
 *
 */

#ifndef SYSTEM_CORE_S5JS100_H
#define SYSTEM_CORE_S5JS100_H

#ifdef __cplusplus
extern "C" {
#endif

/*
 * SystemCoreConfig(): Configure the System Core
 */
void SystemCoreConfig(void);

/* POWER MANAGEMENT */
/* Power Mode Type Definition */
typedef enum {
    /* Sleep Power Mode */
    POWER_MODE_SLEEP = 0,
    /* Deep Sleep Power Mode */
    POWER_MODE_DEEP_SLEEP = 1
} power_mode_t;

/* APB System Core Clocks */
#define SYSTEM_CORE_TIMER0      (1 << 0)
#define SYSTEM_CORE_TIMER1      (1 << 1)
#define SYSTEM_CORE_DUALTIMER0  (1 << 2)
#define SYSTEM_CORE_UART0       (1 << 4)
#define SYSTEM_CORE_UART1       (1 << 5)
#define SYSTEM_CORE_I2C0        (1 << 7)
#define SYSTEM_CORE_WDOG        (1 << 8)
#define SYSTEM_CORE_QSPI        (1 << 11)
#define SYSTEM_CORE_SPI0        (1 << 12)
#define SYSTEM_CORE_SPI1        (1 << 13)
#define SYSTEM_CORE_I2C1        (1 << 14)
#define SYSTEM_CORE_TRNG        (1 << 15) /* TRNG can not be a wakeup source */

/*
 * SystemPowerConfig(): Configures the System Power Modes
 */
void SystemPowerConfig(void);

/*
 * SystemPowerSuspend(): Enters in System Suspend
 */
void SystemPowerSuspend(power_mode_t mode);

/*
 * SystemPowerResume(): Returns from System Suspend
 */
void SystemPowerResume(power_mode_t mode);

/*
 * Definitions for storing static configuration data in Beetle
 * This is not strictly persistent data as it will get wiped out on chip erase.
 *
 * There are only read functions provided.
 * No Write function to prevent accidental writes resulting in
 * the system being non responsive.
 * Use the Flash manual before trying to write anything in the last 4k.
 */
#define SYSTEM_CORE_CONFIG_DATA_SIZE (0x200) /* 512 bytes*/

typedef struct {
    uint32_t BD_ADDR[2];

    /*rest reserved*/
    uint32_t reserved[SYSTEM_CORE_CONFIG_DATA_SIZE - 2];
} SystemCoreConfigData;

/*
 * __System_Config_GetBDAddr(): Address for the BLE device on the air.
 */
void __System_Config_GetBDAddr(uint8_t *addr, uint8_t len);

#ifdef __cplusplus
}
#endif
#endif /* SYSTEM_CORE_S5JS100_H */