/*
* AES block cipher
*
* Copyright (C) 2015-2017, Silicon Labs, http://www.silabs.com
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_AES_ALT_H
#define MBEDTLS_AES_ALT_H
/***************************************************************************//**
* \addtogroup sl_crypto
* \{
******************************************************************************/
/***************************************************************************//**
* \addtogroup sl_crypto_aes AES block cipher
* \brief Hardware accelerated AES block cipher.
* \{
******************************************************************************/
#if defined(MBEDTLS_AES_ALT)
/* SiliconLabs CRYPTO hardware acceleration implementation */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief AES context structure
*/
typedef struct
{
unsigned int keybits; /*!< size of key */
unsigned char key[32]; /*!< AES key 128 or 256 bits */
}
mbedtls_aes_context;
/**
* \brief Initialize AES context
*
* \param ctx AES context to be initialized
*/
void mbedtls_aes_init( mbedtls_aes_context *ctx );
/**
* \brief Clear AES context
*
* \param ctx AES context to be cleared
*/
void mbedtls_aes_free( mbedtls_aes_context *ctx );
/**
* \brief AES key schedule (encryption)
*
* \param ctx AES context to be initialized
* \param key encryption key
* \param keybits must be 128 or 256
*
* \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH
*/
int mbedtls_aes_setkey_enc( mbedtls_aes_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
* \brief AES key schedule (decryption)
*
* \param ctx AES context to be initialized
* \param key decryption key
* \param keybits must be 128 or 256
*
* \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH
*/
int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
* \brief AES-ECB block encryption/decryption
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
* \param input 16-byte input block
* \param output 16-byte output block
*
* \return 0 if successful
*/
int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief AES-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (16 bytes)
*
* \note Upon exit, the content of the IV is updated so that you can
* call the same function again on the following block(s) of
* data and get the same result as if it was encrypted in one
* call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH
*/
int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief AES-CFB128 buffer encryption/decryption.
*
* Note: Due to the nature of CFB you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* mbedtls_aes_setkey_enc() for both MBEDTLS_AES_ENCRYPT and MBEDTLS_AES_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful
*/
int mbedtls_aes_crypt_cfb128( mbedtls_aes_context *ctx,
int mode,
size_t length,
size_t *iv_off,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
/**
* \brief AES-CFB8 buffer encryption/decryption.
*
* Note: Due to the nature of CFB you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* mbedtls_aes_setkey_enc() for both MBEDTLS_AES_ENCRYPT and MBEDTLS_AES_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful
*/
int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
#endif /*MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief AES-CTR buffer encryption/decryption
*
* Warning: You have to keep the maximum use of your counter in mind!
*
* Note: Due to the nature of CTR you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* mbedtls_aes_setkey_enc() for both MBEDTLS_AES_ENCRYPT and MBEDTLS_AES_DECRYPT.
*
* \param ctx AES context
* \param length The length of the data
* \param nc_off The offset in the current stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 128-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
*
* \return 0 if successful
*/
int mbedtls_aes_crypt_ctr( mbedtls_aes_context *ctx,
size_t length,
size_t *nc_off,
unsigned char nonce_counter[16],
unsigned char stream_block[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
/**
* \brief Internal AES block encryption function
* (Only exposed to allow overriding it,
* see MBEDTLS_AES_ENCRYPT_ALT)
*
* \param ctx AES context
* \param input Plaintext block
* \param output Output (ciphertext) block
*
* \return 0 if successful
*/
int mbedtls_internal_aes_encrypt( mbedtls_aes_context *ctx,
const unsigned char input[16],
unsigned char output[16] );
/**
* \brief Internal AES block decryption function
* (Only exposed to allow overriding it,
* see MBEDTLS_AES_DECRYPT_ALT)
*
* \param ctx AES context
* \param input Ciphertext block
* \param output Output (plaintext) block
*
* \return 0 if successful
*/
int mbedtls_internal_aes_decrypt( mbedtls_aes_context *ctx,
const unsigned char input[16],
unsigned char output[16] );
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief Internal AES block encryption function
* (Only exposed to allow overriding it,
* see MBEDTLS_AES_ENCRYPT_ALT)
*
* \deprecated Superseded by mbedtls_aes_encrypt_ext() in 2.5.0
*
* \param ctx AES context
* \param input Plaintext block
* \param output Output (ciphertext) block
*/
MBEDTLS_DEPRECATED static inline void mbedtls_aes_encrypt(
mbedtls_aes_context *ctx,
const unsigned char input[16],
unsigned char output[16] )
{
mbedtls_internal_aes_encrypt( ctx, input, output );
}
/**
* \brief Internal AES block decryption function
* (Only exposed to allow overriding it,
* see MBEDTLS_AES_DECRYPT_ALT)
*
* \deprecated Superseded by mbedtls_aes_decrypt_ext() in 2.5.0
*
* \param ctx AES context
* \param input Ciphertext block
* \param output Output (plaintext) block
*/
MBEDTLS_DEPRECATED static inline void mbedtls_aes_decrypt(
mbedtls_aes_context *ctx,
const unsigned char input[16],
unsigned char output[16] )
{
mbedtls_internal_aes_decrypt( ctx, input, output );
}
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_AES_ALT */
/** \} (end addtogroup sl_crypto_aes) */
/** \} (end addtogroup sl_crypto) */
#endif /* MBEDTLS_AES_ALT_H */
