Merge pull request #15126 from multiplemonomials/create-distro-reborn ...

mbed_create_distro() reborn: a function to make adding multiple targets easy

Merge pull request #15117 from JojoS62/fix-memap-diff ...

CLI2: copy mapfile for diff statistics

remove comment for renaming mapfile

M2354: Fix stdin abnormal on NuMaker-IoT-M2354 with Mbed CLI ...

Due to post-build script not supporting custom board, both the below UART configurations are enabled on NuMaker-IoT-M2354 board:
-   UART0 PA7/PA6 enabled by bl2.bin
-   UART0 PB9/PB8 enabled by tfm_s.bin and later by mbed
Both PA7/PA6 and PB9/PB8 enabled on UART0, PB8 gets disturbed and stdin mis-behaves on NuMaker-IoT-M2354 board.

NuMaker-M2354       : UART TX/RX = UART0 PA7/PA6
NuMaker-IoT_M2354   : UART TX/RX = UART0 PB9/PB8

This bugfix tries to enable post-build for custom board to some degree (not completely), with Mbed CLI.
NOTE: For Mbed CLI, the build process still sees NuMaker-M2354's partition/ and applies its mcuboot build options. Custom board must align on these.

remove comment

STM32H743: correct pack manager rom value

update comment on custom command

Revert "update README for new CMake version" ...

This reverts commit d4062f5.

Revert "Merge branch 'fix-memmap-diff'" ...

This reverts commit 3d22c88.

One more debug message

replace file(copy by cmake -E copy

Remove debug messages

Whoops, add license header

Add mbed-create-distro

STM32: create MCU_STM32H7B3xIQ for custom boards

STM32: create MCU_STM32H735xG for custom boards

Merge pull request #15099 from jeromecoutant/PR_H723 ...

STM32H7: enable more custom boards

update README for new CMake version

Merge branch 'fix-memmap-diff'

copy map file to .old before creating new one

Merge pull request #15095 from LDong-Arm/ctest_nfc ...

CMake: greentea: Migrate the NFC EEPROM test to CTest

STM32H7: update Pack manager ...

Add
- STM32H723ZGTx for all STM32H723xG targets
- STM32H725AEIx for all STM32H725xE targets

STM32G0: update Pack manager ...

Add
- STM32G050K8Tx for all STM32G050x8 targets
- STM32G051K8Tx for all STM32G051x8 targets
- STM32G061K8Tx for all STM32G061x8 targets
- STM32G0B0RETx for all STM32G0B0xE targets
- STM32G0B1RETx for all STM32G0B1xE targets

memap.py: Allow .a extension for Arm Compiler-generated libraries ...

The most common extension for static libraries is .a and CMake generates
it with both GCC and Arm toolchains. Mbed CLI 1 generates .ar files with
the Arm Compiler, but since Mbed CLI 2 uses memap.py to generate map
files too, both extensions should be permitted.

This fixes a warning when building greentea tests:

    Malformed input found when parsing ARMCC map: _deps/greentea-client-build/libclient_userio.a(greentea_test_env.o)
    Malformed input found when parsing ARMCC map: _deps/greentea-client-build/libclient_userio.a(greentea_test_env.o)
    Malformed input found when parsing ARMCC map: _deps/greentea-client-build/libclient_userio.a(greentea_test_env.o)
    ...

which repeats over 30 times per test.

M2354: Fix TF-M 1.4 ...

1.  In TF-M, fix NSPE interrupt-disabled NSC call broken. Check:
    https://developer.trustedfirmware.org/T966
2.  In TF-M, enable mcuboot log enabled forcibly. This is to help check firmware update process.
3.  Update readme and script

tools: tfm: Update bin_utils

ARM PACK MANAGER: add STM32U575ZI and STM32U585

M2354: Change MCUboot image versioning for unique version ...

Change MCUboot image versioning to meet requirements below:
1. Major.Minor.Revision must be non-decremental when used to derive security counter (-s 'auto').
2. Make Major.Minor.Revision+Build incremental to identify the firmware itself through psa_fwu_query().
3. Get around MCUboot failure with TF-M underestimated MAX_BOOT_RECORD_SZ

CMake: Fix escaping of quotes in response file ...

We put macros in a response file compile_time_defs.txt and pass it
to the compiler. Adding a pair of single quotes around each -D flag
ensures macro values are quoted correctly.

For example,
* String
  * target_compile_definitions(): either FOO="BAR" or FOO=\"BAR\"
  * response file: '-DFOO="BAR"'
  * actual definition: #define FOO "BAR"
* Array of integers
  * target_compile_definitions(): FOO={1, 2, 3}
  * response file: '-DFOO={1, 2, 3}'
  * actual definition: #define FOO {1, 2, 3}

cmsis importer: add IAR fix for .S files