2023-05-17 |
Synchronize upstream changes - May 2023 edition (#160)
...
* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436
* Fix mesh connect semaphore not releasing causing blockage
* Add support of NSAPI_ICMP sockets in Nanostack
* STM32F1: add MCU_STM32F103xD support
* STM32F1: add MCU_STM32F103xG support
* test: Disable failing tests due to echo server
Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
* Check CAN DLC length value
* Fix default interface ID only being used partially
If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.
* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.
Signed-off-by: Yilin Sun <imi415@imi.moe>
* CAN: read only up to 8 bytes
If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.
This fixes https://github.com/ARMmbed/mbed-os/issues/15361
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
* STM32F303xC: add RAM_CCM in GCC linker script
* fix(drivers/emac): Remove incorrect RMII RX ER initialization
* fix(drivers/emac): Add missing SPDX indetifier to ST driver files
* fixed compiler inline issue
* Update Mbed version block
* removed HSE speed limitation for STM32G431RB
* Added HSE range validation for STM32g431xB
* added support for 4, 8 and 16MHz
* M487: Remove unused variable 'u32EscapeFrame'
Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings
* force FIFO IRQ for FDCan RX on H7
* Add hardware CRC support to STM32G4
* add support for Nucleo-H745ZI
* Update MAX32670 peripheral drivers with final ones that use by SDK
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32670 apply mbed required changes on peripheral drivers
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M467: Support CAN bus
1. Update BSP CANFD driver
2. Notes for implementation
(1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
(2) For Rx disabling multiple filter handles,
1) Map all filter handles to filter handle 0
2) Use Rx FIFO 0 for filter handle 0
(3) For Rx enabling multiple filter handles,
1) Use Rx FIFO 0 for filter handle 0
2) Use Rx FIFO 1 for filter handle through first invoking can_filter()
3) Use dedicated Rx Buffer for other filter handles
NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
(4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
(5) Support no CAN FD.
* Fix 'new[]' array freed with 'delete'
The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.
* Define default parameters of functions of derived class the same as the base class
The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.
* Avoid calling virtual functions from constructors and destructors
Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.
* Fix potentially overrunning write of sprintf
Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.
* Fix system_clock.c location
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
* Fix variable name
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
* Change storage-class of secret_buf to static
Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.
* fix compiling errors of FATFileSystem when exFAT was enabled
* Add OSPI support for STM32H7
* Nuvoton: Enable extending sampling time for ADC/EADC
For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.
---------
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>
Jamie Smith
authored
on 17 May 2023
GitHub
committed
on 17 May 2023
|
2022-12-30 |
Fix all Doxygen errors and make any future errors fatal (#118)
...
* Start working on fixing doxygen warnings
* Upgrade doxyfile to Doxygen 1.9.1
* Clean up some unmatched groups and add some exclusions
* Fix docs for rtos::ThisThread not showing up
* Fix up KV store docs
* Fix incorrect @files, some more incorrect groups
* Fix lots of broken links
* Start fixing mbedtls groups
* Fix more mbedtls docs
* Fix remaining mbedtls files with missing or incorrect grouping
* Fix a huge amount of PSA docs errors
* Fix a few more mbedtls docs errors
* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors
* Fix some broken doc links in HAL headers
* Fix more PSA doc errors
* Fix some doxygen errors in networking code
* Fix lots of network related doc errors
* Try and fix some CI failures
* Use Doxygen Action instead of doxygen in Mbed container to get the right version
* Try removing docs check
* Add first part of doxygen action
* Add next part of doxygen action
* Fix yaml syntax error
* Add in license check fix
* Try using verbose scancode
* Fix some more docs issues, workaround scancode-toolkit#3179
* Clean up the LoRaRadio get_state() function on each implementation. Also fix some other compile and doc errors.
* Fix all remaining doxygen errors
* Fix escaping, for realsies this time
* Remove Doxygen unsupported config options, fix some more get_status() declarations
* Fix some UNITTESTS build errors
* Fix one more compile error
* Another unittest error
Jamie Smith
authored
on 30 Dec 2022
GitHub
committed
on 30 Dec 2022
|
2021-10-21 |
NetworkStack: Remove stub implementations of socket_x_control
...
As a default implementation is already provided by
NetworkStack, stub implementations in the child classes
are not required. Furthermore, they return unsupported for
all cases instead of redirecting to the non-control API,
which is plainly wrong.
Bora Özgen
committed
on 21 Oct 2021
|
2021-09-03 |
Code improvements for the unresolved comments
...
This patch contains improvements mentioned in the unresolved PR
comments:
- function names were changed from socket_sendmsg/socket_recvmsg to
socket_sendto_control/socket_recvfrom_control.
- default implementation of this functions was provided in the
NetworkStack class.
- MsgHeaderIterator accesses elements on the aligned addresses.
mateusz.kalinowski
committed
on 3 Sep 2021
|
2021-09-01 |
New feature: send/recv message implementation added to network stack
Tymoteusz Bloch
authored
on 30 Jun 2021
mateusz.kalinowski
committed
on 1 Sep 2021
|
2020-11-30 |
Remove API changes
...
-Remove Nanostack::add_ethernet_interface API change
-Add get_mac_address to MeshEthernetInterface
-Fix compiler warnings by adding overrides
Arto Kinnunen
committed
on 30 Nov 2020
|
2020-11-18 |
Review correction: Remove unnecessary method
...
Remove unnecessary method: add_ethernet_interface_ns
Arto Kinnunen
committed
on 18 Nov 2020
|
MAC address set/get support for EMAC interface
...
Add support to set and get MAC address from EMAC interface.
Arto Kinnunen
committed
on 18 Nov 2020
|
2020-10-07 |
Mesh: Enable Nanostack DNS cache usage
...
Inherit methods gethostbyname, gethostbyname_async and get_dns_server
to Nanostack class. Methods will try to find DNS server address
or DNS query results from Nanostack DNS cache.
Arto Kinnunen
committed
on 7 Oct 2020
|
2020-08-05 |
Mbed OS will soon be changing directory structure to the below:
...
```
connectivity
├── netsocket
├── lwipstack
├── nanostack
│ ├── mbed_lib.json // nanostack-interface's mbed_lib.json
│ ├── include
│ │ └── nanostack // headers from features/netsocket/nanostack-interface
│ ├── source // sources from features/netsocket/nanostack-interface
│ ├── coap-service // used by Thread only - deprecate?
│ ├── mbed-mesh-api
│ ├── nanostack-hal-mbed-cmsis-rtos // HAL porting layer for Nanostack on mbed with CMSIS-RTOS
│ ├── sal-stack-nanostack
│ └── sal-stack-nanostack-eventloop
├── cellular // previously in features/cellular/framework/
├── ...
```
This PR is a part of a wider \connectivity refactoring and implements the above new directory structure for \nanostack.
Ashok Rao
committed
on 5 Aug 2020
|