2023-05-17 |
Synchronize upstream changes - May 2023 edition (#160)
...
* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436 * Fix mesh connect semaphore not releasing causing blockage * Add support of NSAPI_ICMP sockets in Nanostack * STM32F1: add MCU_STM32F103xD support * STM32F1: add MCU_STM32F103xG support * test: Disable failing tests due to echo server Some tests are failing as echo.mbedcloudtesting.com is not serving TLS requests anymore. Signed-off-by: Saheer Babu <saheer.babu@arm.com> * Check CAN DLC length value * Fix default interface ID only being used partially If user sets the default interface ID for a socket (e.g. using setsockopt with SOCKET_INTERFACE_SELECT), the default interface should take over other interface selection mechanisms as a interface is bound to the socket. This applies for both IPv6 local and global scopes for unicast messages but not for multicast messages as these are bound to a multicast interface using SOCKET_IPV6_MULTICAST_IF socket option. * Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax. Signed-off-by: Yilin Sun <imi415@imi.moe> * CAN: read only up to 8 bytes If HAL implementation writes more than 8 bytes of data, error immediately. CANMessage defines only 8 bytes of data, lenght cannot be > 8. This fixes https://github.com/ARMmbed/mbed-os/issues/15361 Signed-off-by: Martin Kojtal <martin.kojtal@arm.com> * STM32F303xC: add RAM_CCM in GCC linker script * fix(drivers/emac): Remove incorrect RMII RX ER initialization * fix(drivers/emac): Add missing SPDX indetifier to ST driver files * fixed compiler inline issue * Update Mbed version block * removed HSE speed limitation for STM32G431RB * Added HSE range validation for STM32g431xB * added support for 4, 8 and 16MHz * M487: Remove unused variable 'u32EscapeFrame' Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings * force FIFO IRQ for FDCan RX on H7 * Add hardware CRC support to STM32G4 * add support for Nucleo-H745ZI * Update MAX32670 peripheral drivers with final ones that use by SDK Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com> * MAX32670 apply mbed required changes on peripheral drivers Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com> * M467: Support CAN bus 1. Update BSP CANFD driver 2. Notes for implementation (1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used. (2) For Rx disabling multiple filter handles, 1) Map all filter handles to filter handle 0 2) Use Rx FIFO 0 for filter handle 0 (3) For Rx enabling multiple filter handles, 1) Use Rx FIFO 0 for filter handle 0 2) Use Rx FIFO 1 for filter handle through first invoking can_filter() 3) Use dedicated Rx Buffer for other filter handles NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer. (4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue. (5) Support no CAN FD. * Fix 'new[]' array freed with 'delete' The array _scratch_buf is allocated using new[] in line 761 of mbed-os/storage/kvstore/securestore/source/SecureStore.cpp. But it was freed using delete. * Define default parameters of functions of derived class the same as the base class The member function bringup() of class ThreadInterface redefines parameter stack's default value to IPV6_STACK from the inherited default value DEFAULT_STACK (in Interface). The default value will be resolved statically, not by dispatch, so this can cause confusion. Similar arguments apply to LoWPANNDInterface and WisunInterface. * Avoid calling virtual functions from constructors and destructors Virtual functions are resolved statically (not dynamically) in constructors and destructors for the same class. The call should be made explicitly static by qualifying it using the scope resolution operator. * Fix potentially overrunning write of sprintf Format string "%d" requires 12 bytes (including the null terminator). Also, use snprintf instead of sprintf to prevent buffer overflow. * Fix system_clock.c location Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com> * Fix variable name Signed-off-by: Jasper <jasper.jonker@wingtra.com> * Change storage-class of secret_buf to static Storing the address of a local variable (`secret_buf`) in non-local memory (`prf_ptr->secret`) can cause a dangling pointer bug if the address is used after the function returns. * fix compiling errors of FATFileSystem when exFAT was enabled * Add OSPI support for STM32H7 * Nuvoton: Enable extending sampling time for ADC/EADC For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis. --------- Signed-off-by: Saheer Babu <saheer.babu@arm.com> Signed-off-by: Yilin Sun <imi415@imi.moe> Signed-off-by: Martin Kojtal <martin.kojtal@arm.com> Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com> Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com> Signed-off-by: Jasper <jasper.jonker@wingtra.com> Co-authored-by: caodd <caodd1993@qq.com> Co-authored-by: YannCharbon <yann.charbon@ik.me> Co-authored-by: Jerome Coutant <jerome.coutant@st.com> Co-authored-by: Saheer Babu <saheer.babu@arm.com> Co-authored-by: Martyx00 <martin.petran@protonmail.com> Co-authored-by: Yilin Sun <imi415@imi.moe> Co-authored-by: Martin Kojtal <martin.kojtal@arm.com> Co-authored-by: akiroz <akiroz.vectis@gmail.com> Co-authored-by: Charles <hallard04@free.fr> Co-authored-by: Leonard Chiang <leochiang2002@gmail.com> Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com> Co-authored-by: jmcloud <jmcloud@tesla.com> Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com> Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com> Co-authored-by: Mingjie Shen <shen497@purdue.edu> Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com> Co-authored-by: wdx04 <wdx04@outlook.com>
Jamie Smith
authored
on 17 May 2023
GitHub
committed
on 17 May 2023
|
---|---|
2022-12-31 |
Merge upstream changes into mbed-ce (#117)
...
* Fix for calculating CAN timing settings.
NominalPrescaler value needs to be as high as possible to ensure a good approximation of the target CAN speed.
Previous usage of macro IS_FDCAN_DATA_TSEG1 refers to (unsupported by Mbed ) FDCAN CAN controller settings and leads to too low prescaler values.
Usage Macro IS_FDCAN_NOMINAL_TSEG1 yields optimum results.
See also correct macro usage in line #158.
* Add complete support of DHCP relay interface ID option
RFC3315 specifies the following: "The relay agent MAY send the Interface-id
option to identify the interface on which the client message was received.
If a relay agent receives a Relay-reply message with an Interface-id
option, the relay agent relays the message to the client through the
interface identified by the option."
The current implementation of the DHCP relay reply handling, the interface
ID field from the server response is ignored. Managing the interface ID
is very important especially as DHCP requests/replies use link-local
addresses. The consequence of this is that the interface must always be
specified because the routing layer cannot guess the correct interface.
Moreover, Mbed provides a mechanism to enable/disable the interface ID
option on a DHCP relay instance, so it is important to fully support it.
The reason why this issue has not been discoverd until now is that the DHCP
relay is mainly used on systems that use only one interface (such as Wi-SUN
routers). By default, when no interface ID is specified for the socket, the
latter will choose 6loWPAN interface by default. This means that if two
interfaces are used on the same device, the 6loWPAN interface is always
selected.
The commit adds code to retrieve the interface-id value contained within
the DHCP relay reply message and write it to a control message header
that is added to the socket message. This tells the socket which
interface to choose. If the interface-id option is not enabled on the
relay, this procedure is simply ignored.
* Support Nuvoton target NUMAKER_IOT_M467
1. Based on alpha version BSP (
Jay Sridharan
authored
on 31 Dec 2022
GitHub
committed
on 31 Dec 2022
|