Synchronize upstream changes - May 2023 edition (#160) ...

* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436

* Fix mesh connect semaphore not releasing causing blockage

* Add support of NSAPI_ICMP sockets in Nanostack

* STM32F1: add MCU_STM32F103xD support

* STM32F1: add MCU_STM32F103xG support

* test: Disable failing tests due to echo server

Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.

Signed-off-by: Saheer Babu <saheer.babu@arm.com>

* Check CAN DLC length value

* Fix default interface ID only being used partially

If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.

* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.

Signed-off-by: Yilin Sun <imi415@imi.moe>

* CAN: read only up to 8 bytes

If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.

This fixes https://github.com/ARMmbed/mbed-os/issues/15361

Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>

* STM32F303xC: add RAM_CCM in GCC linker script

* fix(drivers/emac): Remove incorrect RMII RX ER initialization

* fix(drivers/emac): Add missing SPDX indetifier to ST driver files

* fixed compiler inline issue

* Update Mbed version block

* removed HSE speed limitation for STM32G431RB

* Added HSE range validation for STM32g431xB

* added support for 4, 8 and 16MHz

* M487: Remove unused variable 'u32EscapeFrame'

Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings

* force FIFO IRQ for FDCan RX on H7

* Add hardware CRC support to STM32G4

* add support for Nucleo-H745ZI

* Update MAX32670 peripheral drivers with final ones that use by SDK

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* MAX32670 apply mbed required changes on peripheral drivers

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* M467: Support CAN bus

1.  Update BSP CANFD driver
2.  Notes for implementation
    (1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
    (2) For Rx disabling multiple filter handles,
        1)  Map all filter handles to filter handle 0
        2)  Use Rx FIFO 0 for filter handle 0
    (3) For Rx enabling multiple filter handles,
        1)  Use Rx FIFO 0 for filter handle 0
        2)  Use Rx FIFO 1 for filter handle through first invoking can_filter()
        3)  Use dedicated Rx Buffer for other filter handles
        NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
    (4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
    (5) Support no CAN FD.

* Fix 'new[]' array freed with 'delete'

The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.

* Define default parameters of functions of derived class the same as the base class

The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.

* Avoid calling virtual functions from constructors and destructors

Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.

* Fix potentially overrunning write of sprintf

Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.

* Fix system_clock.c location

Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>

* Fix variable name

Signed-off-by: Jasper <jasper.jonker@wingtra.com>

* Change storage-class of secret_buf to static

Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.

* fix compiling errors of FATFileSystem when exFAT was enabled

* Add OSPI support for STM32H7

* Nuvoton: Enable extending sampling time for ADC/EADC

For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.

---------

Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>

STM32 I2C v2 HAL: Fix repeated starts in transaction mode (#153) ...

* Try and fix repeated start for transactional I2C API

* Use OTHER_FRAME everywhere

Rethink STM32 I2C v2 HAL (#78) ...

* Initial attempt at rethinking the STM32 I2C v2 HAL.  Makes single-byte work properly and adds a new 'state' variable to track what the hardware is doing.

* Fix some initial test failures

* Fix incorrect logic

* Fix more incorrect logic

* Tabs to spaces

* Fix repeated starts with single-byte API

* Fix race condition causing stop() after nacked address to sometimes break things

* Fix missed i2c structs that should have been removed

* Fix doing a repeated start from single-byte to transaction API causing I2C peripheral to lock up

* Fix xferOperation being set wrong for repeated starts, causing the peripheral to hang

* Fix race condition with repeated start after single-byte operation

* Fix compilation for targets that use I2C IP v1

* Fix initialization of XferOperation for API v1, optimize stop()

* Remove unneeded line

* Add docs for I2C events

Merge pull request #15099 from jeromecoutant/PR_H723 ...

STM32H7: enable more custom boards

STM32H7 add subfamilies for custom boards ...

- STM32H723xG
- STM32H725xE
- STM32H750xB

STM32G0: update from STM32Cube_FW_G0_V1.5.0

STM32 Fix i2c_compute_timing() API

driver/i2c: STM32: Solves I2C driver performanc issue. ...

This commit solves issue related to i2c driver performance.
With this commit delay in read write when using i2c timing
algorithm is solved. Used flag mechanism which will check
tim reg value and hz passed.

Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>

Merge pull request #14776 from affrinpinhero-2356/i2c_longTime_Mem_Solve ...

driver/i2c: STM32: I2C memory usage and time delay in read-write solved.

driver/i2c: STM32: Solves excess memory usage issue. ...

This commit solves excess usage of RAM. User can now enable/disable
I2C timing algorithm. Disabling of I2C timing algorithm would
reduce RAM usage.

Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>

Merge pull request #14659 from arduino/i2c_slave_patch ...

STM32: make i2c_salve_read return the number of bytes read

STM32: Fixed I2C Bug reported. ...

Modified HAL_I2C_ErrorCallback function to solve bug reported in I2C Driver.
This commit solves compilation error occured when DEVICE_I2CSLAVE is not defined.

fix #14696

Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>

make i2c_salve_read return the number of bytes read to let mbed-os read API return an error if less bytes are readed

Merge pull request #14668 from ikmdani/fix_i2c_read_13967 ...

Driver: I2C: STM32F2/STM32F4/STM32L1: Fix alternate i2c read.

Merge pull request #14557 from affrinpinhero-2356/feature_i2cTiming_Calculation ...

STM32: driver/Added I2C timing calculation algorithm

driver/i2c: Added I2C timing calculation function. ...

This commit adds I2C timing value automatic calculation algorithm
for all supported families added. This patch improves I2C timing calculation
according to I2C input clock and I2C bus speed.
This commit also allows user to change the system clock and I2C input clock.

Related issue: #12907

Pull request type:
[x] Patch update (Bug fix / Target update / Docs update / Test update / Refactor)
[] Feature update (New feature / Functionality change / New API)
[] Major update (Breaking change E.g. Return code change / API behaviour change)

Test results:
[] No Tests required for this change (E.g docs only update)
[x] Covered by existing mbed-os tests (Greentea or Unittest)
[] Tests / results supplied as part of this PR

Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>

Driver: I2C: STM32F4: Fix for every alternate i2c read failure in F2, F4 & L1 families. ...

This commit fixes the i2c driver issue reported in the below link:
https://github.com/ARMmbed/mbed-os/issues/13967 on STM32F4xx platform.

The data type of XferOperation has been changed from uint8_t to uint32_t
so that it can hold a 32bit value (for example: I2C_OTHER_FRAME or
I2C_OTHER_AND_LAST_FRAME).

Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>

Updated HAL_I1C_ErrorCallback funtion to store information about error reason in obj_s->event. This will help user or application to check the reason for the error caused. This address the issue reported in the below link: ARMmbed/mbed-os#14059 ...

Summary of changes:

Impact of changes

Migration actions required

Pull request type
[x] Patch update (Bug fix / Target update / Docs update / Test update / Refactor)
[] Feature update (New feature / Functionality change / New API)
[] Major update (Breaking change E.g. Return code change / API behaviour change)

Test results

[] No Tests required for this change (E.g docs only update)
[x] Covered by existing mbed-os tests (Greentea or Unittest)
[] Tests / results supplied as part of this PR

Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>

STM32 I2C : correct deinit ...

Set port mode back to Analog (reset value)

Merge pull request #14030 from arduino/i2c_stm32_wrong_clock ...

STM32H7: Compute I2C timing according current I2C clock source

STM32WL : I2C full support

STM32WL : ADDING STM32 SUPPORT ...

Add code concerning all STM32 platforms

manage I2C_IP_VERSION_V1 boards builds

Increase FLAG_TIMEOUT to avoid misleading triggers

Use the proper clock source for any I2C instance

STM32 I2C: use correct HAL API

STM32 warning remove

implement i2c_free for STM family

STM32L5 : update generic STM files for L5

Merge pull request #11950 from ABOSTM/DISCO_H747I_TICKLESS ...

DISCO_H747I: add support of MBED_TICKLESS