Remove all source files exclusive to Arm Compiler and IAR (#159) ...

* Remove all source files exclusive to Arm Compiler and IAR

* Also remove 'TOOLCHAIN_ARM'

* Remove targets.json entries for ARM and IAR

More fixes for sleep and clocking stuff on MIMXRT105x (#158) ...

* More fixes for sleep and clocking stuff on MIMXRT105x

* Fix a couple of inadvertent changes

Refactor MIMXRT105x target labels and linker script, locate general data in DTCM memory instead of OCRAM for improved performance (#157)

Teensy 4.1 port with Ethernet support (#144) ...

* Start porting to Teensy 4.1, also fix some compiler warnings in FSL HAL

* Add hardware init for Teensy, refactor phy drivers, rework IMX EMAC autonegotiate code

* Revert some testing changes

* Fix incorrect phy address used outside of low_level_init_successful()

* Ethernet operational!

* Turn off DEBUG_IMX_EMAC

* Style fixes

* Style again

* Bugfix: mbed_lib.json files in project source dir were not getting picked up

* Bugfix: CLion debug configurations not generated properly due to variables going out of scope

* Support Teensy OTP MAC address

(profiles): Remove debug symbols from release profile, compress debug sections (#147)

(vscode + cmake) Add option MBED_GENERATE_VSCODE_CONFIG (#142)

Fix debug-less upload methods (#140) ...

* Fix debug-less upload methods

* Oops, fix build outside of Clion

Refactor upload methods to streamline the debugging experience (#129) ...

* Change all debug configurations to not reset and exit on error.  Initial tasks.json implementation.

* st-util working on command line and VS Code!

* Convert STM32CUBE, fix spaces in GDB server task command

* pyocd working!

* Convert OpenOCD

* Convert JLINK

* Convert REDLINK upload method

* Fix CMake typo

* Try and fix some variable scope issues

* Initial CLion implementation.  Need to test with hardware.

* Add a separate task that kicks off a build before each debug session

Update MIMXRT clocking to hopefully fix deep sleep, fix boot issues on Teensy4 (#130) ...

* Fix incorrect image length in header preventing boot

* Fix ncache region being located in SEMC even on boards without it

* Don't reserve RAM for ncache anymore

* Fix crash when activating BufferedSerial on Teensy D0 and D1.  Also fix incorrect daisy register mapping.

* Fix missing space in linker script

* Start on fixing incorrect MIMXRT clock frequency

* LPM working!

* Clean up LPM and clocking

* Add teensy model identifier

* Fix license headers

MIMXRT1060_EVK and Teensy 4.0 support (#113) ...

* Initial attempt at Teensy 4.0 support

* Hide internal target

* Fix some targets.json issues, add boot code for the MIMXRT1060_EVK.  It boots but tests aren't able to run properly yet.

* Disable LPTICKER on MIMXRT1060, fix pin names for newer dev kits

* Enable MIMXRT106x ethernet

Enable disabling target files for custom targets (#107) ...

* Enable disabling target files for custom targets

* Fix unittests

* Fix unittests again

add custom linker script (#103) ...

* add custom linker script
a custom linker script can be applied by adding the .ld filepath
as 2nd argument to mbed_set_post_build

* more detailed comment

* add if is_standalone for text cases

* replace COMMENT in add_custom_command by echo
COMMENT is not reliable printed

add depth, json and html to memap (#95)

Add upload method support for MIMXRT1050 EVK (#84)

add separate cxx options for gcc (#80) ...

* add separate cxx options for gcc

* remove warning write-strings

Enable Arduino Nano 33 BLE (#55) ...

* Add upload target for Arduino Nano 33 BLE, fix linker script preprocessing, add option for USB serial by default

* astyle error

* Use HINTS instead of PATHS so that the Arduino dir is searched first

* Enable OpenOCD and PyOCD for Nano 33 BLE in SWD mode

* Fix missing dependency for USB tests on Windows

* Add RAM defines for nrf52840

* Fix mbed-storage-kv-config depending on SD card library even if said library was not enabled

* Update dsrdtr value

* No longer need to modify linker script now that we aren't using whole-archive!

* Add OPENOCD_ADAPTER_SERIAL

* Add handling for cmsis dap

* Fix typo

* Fix weak symbol issue causing Bluetooth to not work.  In this case, the weak implementation can simply be removed, because there's no legitimate case where it is used.

Don't use whole-archive linking (#71) ...

* First attempt at converting to OBJECT libraries.  Not working due to more object library limitations

* Only compile the main libraries as OBJECT, because that's all that CMake can be made to do right now.

* Fix availability of target-specific flags

* Missed some usages

* Fix some STM32 ethernet stuff that was not linking correctly

* More fixes for STM32 ethernet and weak symbols

* Fix prebuilt object file linking for MUSCA_S1

* Fix STM32 eth init license headers

Fix issue with Python exit codes that masked failures (#56)

Print the command when a greentea test is being run. Also fix mbedhtrun not being on PATH causing all tests to pass! (#51) ...

* Print the command when a greentea test is being run.  Also fix mbedhtrun not being on PATH causing all tests to pass!

* Also remove useless -f argument to mbedhtrun (not used with --skip-flashing)

Oops, missed a file

Change linker script handling logic to use only one linker script target

Fix OpenOCD not working for L452RE, fix running tests with a non-default baudrate set, add warning about old stlink versions which may not work

Silence noisy print, fix bug with MBED upload method not working

Move UploadMethods.md to wiki, add install path guessing to Findstlink for Windows

Switch to cortex-debug plugin for VS Code to improve debugging experience

Add in mbed-cmake's configuration generators

Clean up detection of failed generation / missing include file

MBED_APP_JSON_PATH should no longer be required, as some projects don't need it

Add automatic execution of mbedtools configure

Fix typo in yaml