GPIO: Use uintptr_t for gpio_irq_api context ...

The HAL gpio_irq_api stores object IDs, which serve as a form of context
for the dispatch of the interrupt handler in the drivers level
InterruptIn Class. The way this is achieved is that the InterruptIn
Class casts its address to uint32_t, which is stored as the ID.
This results in compilation failure when the size of an object pointer
is greater than uint32_t, for example when building on a PC for unit
testing.

In order to allow Unit Testing of the InterruptIn Class, we replace the
use of uint32_t with uintptr_t (type capable of holding a pointer),
which allows portability and expresses intentions more clearly.
In aid of this latter goal, we also replace the use of the name "id"
with "context", to improve clarity - these are addresses of the context
related to that callback.

Update UART pin names & add MBED_CONF_TARGET_STDIO_UART overrides

Add standard pin-names validation script & tests

Merge pull request #14291 from harmut01/baremetal_freescale ...

Add bare metal support to freescale targets

Create FLASH CMSIS ALGO target to remove dependency on MBED_TARGET_LABELS ...

This goes towards eventually removing reliance on targets.json to specify
the requirements of Mbed targets.

uARM: Remove dependencies from Freescale targets

CMake: Refactor Freescale targets ...

Refactor all Freescale targets to be CMake buildsystem targets. This removes
the need for checking MBED_TARGET_LABELS repeatedly and allows us to be
more flexible in the way we include MBED_TARGET source in the build.

A side effect of this is it will allow us to support custom targets
without breaking the build for 'standard' targets, as we use CMake's
standard mechanism for adding build rules to the build system, rather
than implementing our own layer of logic to exclude files not needed for
the target being built. Using this approach, if an MBED_TARGET is not
linked to using `target_link_libraries` its source files will not be
added to the build. This means custom target source can be added to the
user's application CMakeLists.txt without polluting the build system
when trying to compile for a standard MBED_TARGET.

CMake: Add support for Freescale KLXX targets ...

All Freescale KLXX targets supported by Mbed OS
can now be built with CMake.

Add SPDX license identifier to Arm files ...

Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.

Add license notice to Arm copyrighted source files ...

Scancode found missing license notices in our source files. This commit
addresses those issues by adding an Apache-2.0 notice to source files
highlighted.

stack: armc: Workaround config passing bug ...

Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.

Use boot stack size from config system ...

To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.

Fixes #10319

Clean up ARM toolchain heap+stack setup in targets ...

ARM Compiler 6.13 testing revealed linker errors pointing out
conflicting use of `__user_setup_stackheap` and
`__user_initial_stackheap` in some targets. Remove the unwanted
`__user_initial_stackheap` from the targets - the setup is
centralised in the common platform code.

Looking into this, a number of other issues were highlighted

* Almost all targets had `__initial_sp` hardcoded in assembler,
  rather than getting it from the scatter file. This was behind
  issue #11313. Fix this generally.
* A few targets' `__initial_sp` values did not match the scatter
  file layout, in some cases meaning they were overlapping heap
  space. They now all use the area reserved in the scatter file.
  If any problems are seen, then there is an error in the
  scatter file.
* A number of targets were reserving unneeded space for heap and
  stack in their startup assembler, on top of the space reserved in
  the scatter file, so wasting a few K. A couple were using that
  space for the stack, rather than the space in the scatter file.

To clarify expected behaviour:

* Each scatter file contains empty regions `ARM_LIB_HEAP` and
  `ARM_LIB_STACK` to reserve space. `ARM_LIB_STACK` is sized
  by the macro `MBED_BOOT_STACK_SIZE`, which is set by the tools.
  `ARM_LIB_HEAP` is generally the space left over after static
  RAM and stack.
* The address of the end of `ARM_LIB_STACK` is written into the
  vector table and on reset the CPU sets MSP to that address.
* The common platform code in Mbed OS provides `__user_setup_stackheap`
  for the ARM library. The ARM library calls this during startup, and
  it calls `__mbed_user_setup_stackheap`.
* The default weak definition of `__mbed_user_setup_stackheap` does not
  modify SP, so we remain on the boot stack, and the heap is set to
  the region described by `ARM_LIB_HEAP`. If `ARM_LIB_HEAP` doesn't
  exist, then the heap is the space from the end of the used data in
  `RW_IRAM1` to the start of `ARM_LIB_STACK`.
* Targets can override `__mbed_user_setup_stackheap` if they want.
  Currently only Renesas (ARMv7-A class) devices do.
* If microlib is in use, then it doesn't call `__user_setup_stackheap`.
  Instead it just finds and uses `ARM_LIB_STACK` and `ARM_LIB_HEAP`
  itself.

Target_Freescale: Add heap section in linker files

Target_Freescale: Set the heap size and limit

Add HAL API for spi pinmap ...

Add the functions to get spi pinmaps to all targets.

Add HAL API for serial pinmap ...

Add the functions serial_tx_pinmap, serial_rx_pinmap, serial_cts_pinmap
and serial_rts_pinmap to all targets.

[Freescale] Support boot stack size configuration option

Freescale: Fix alignment of execute region to 8-byte boundary ...

--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary

Changes in PR #7774 of PinNames.h should be reverted. This commit reverts those files excpet for K82F and K64F which are left as an example

Moving SD, SPIF and FLASHIAP into mbedos and refactoring features storage directory structure.

Enable Compiling with ARMC6 across all targets ...

remove duplicate sys.cpp

Closed review comments ...

1. Doxygen and Grammar related
2. Change dummy to spi_fill
3. Remove NXP driver and add default loop in spi block read (same as all
other drivers)

Merge pull request #4294 from ARMmbed/feature_cmsis5 ...

Update CMSIS-Core and RTX to version 5

CMSIS5: Replace target defined NVIC_Set/GetVector with CMSIS implementation

spi: Added default spi_master_block_write implementation to all targets ...

There is an easy default implementation of spi_master_block_write that
just calls spi_master_write in a loop, so the default implementation
of spi_master_block_write has been added to all targets.

Added mapping to USER_BUTTON-labelled switches ...

Revert HRM1017 file source deletion

Added in small comment next to additions

Added mapping to BTN-labelled switches

Added mapping to USER_BUTTON-labelled switches

Undo incorrect mapping to SWIO pin in NORDIC target

Adding consistent button pin mappings

flash: fix flash algo generated - protect with DEVICE_FLASH

Renamed files in platform to match source names ...

critical.h     -> mbed_critical.h
sleep.h        -> mbed_sleep.h
toolchain.h    -> mbed_toolchain.h
rtc_time.h     -> mbed_rtc_time.h
semihost_api.h -> mbed_semihost_api.h
wait_api.h     -> mbed_wait_api.h