Bugfix: LPC1768 IAP could not copy flash to flash (#156) ...

* Bugfix: LPC1768 IAP could not copy flash to flash

* Add flash to flash test for flash API

* Fix style

* Style again

* Augh again

Provide MBED_RAM_SIZE define allowing greentea tests to compile

GPIO: Use uintptr_t for gpio_irq_api context ...

The HAL gpio_irq_api stores object IDs, which serve as a form of context
for the dispatch of the interrupt handler in the drivers level
InterruptIn Class. The way this is achieved is that the InterruptIn
Class casts its address to uint32_t, which is stored as the ID.
This results in compilation failure when the size of an object pointer
is greater than uint32_t, for example when building on a PC for unit
testing.

In order to allow Unit Testing of the InterruptIn Class, we replace the
use of uint32_t with uintptr_t (type capable of holding a pointer),
which allows portability and expresses intentions more clearly.
In aid of this latter goal, we also replace the use of the name "id"
with "context", to improve clarity - these are addresses of the context
related to that callback.

CAN: Use uintptr_t for can_irq_ids ...

The HAL can_api stores an array of IDs in order to dispatch interrupts
to the correct CAN object. The drivers level CAN Class casts a pointer
to itself to an uint32_t, which is stored as the ID and then cast back
to a CAN * in order to call the correct handler. This results in
compilation failure when the size of an object pointer is greater than
uint32_t, for example when building on a PC for unit testing.

In order to allow Unit Testing of the CAN Class, we replace the use of
uint32_t with uintptr_t (type capable of holding a pointer), which
allows portability and expresses intentions more clearly. In aid of this
latter goal, we also replace the use of the name "id" with "context",
to improve clarity. These are addresses of the context related to that
callback.

CMake targets: remove MBED_PATH, use stadard variables ...

- list files included via module path
- <project-name>_SOURCE_DIR for sources that are out of the current processed CMake
- CMAKE_CURRENT_LIST_DIR for listfiles

Update UART pin names & add MBED_CONF_TARGET_STDIO_UART overrides

Add standard pin-names validation script & tests

Fix post build mechanism with unique CMake custom targets ...

The CMake custom target must be unique to avoid more than one
Mbed target adding the same. Only the CMake custom command added for the
Mbed target being built is run as the custom CMake target now includes
the Mbed target name.

CMake: Add post build operation support ...

A CMake custom target, mbed-post-build, is added as a dependency of the
application CMake target if a Mbed target adds a CMake custom target
named mbed-post-build-bin. mbed-post-build-bin is added as a dependency
of mbed-post-build. mbed-post-build-bin depends on the application binary.
This is done so a CMake custom command that executes post-build can be added.

The Python scripts that implement the operations have been modified to add
CLI entry points so they can be called from CMake. Dependency on the old
tool has been removed on those scripts by passing them exactly what they
require instead of passing old tool Python objects. A consequence of that
was to slightly amend how the old tool calls some of those Python modules.

Support has only been added for Mbed targets that currently have a requirement
for post build operations. This includes: LPC1114, LPC1768, ARCH_PRO, LPC54114,
LPC546XX, FF_LPC546XX, CY8CKIT064B0S2_4343W, CYTFM_064B0S2_4343W, CYSBSYSKIT_01

The following targets are not supported as TFM support is not yet included:
ARM_MUSCA_B1, ARM_MUSCA_B1_NS, ARM_MUSCA_S1, ARM_MUSCA_S1_NS.

CMake: Refactor NXP targets ...

Refactor all NXP targets to be CMake build system targets. This removes
the need for checking MBED_TARGET_LABELS repeatedly and allows us to be
more flexible in the way we include MBED_TARGET source in the build.

A side effect of this is it will allow us to support custom targets
without breaking the build for 'standard' targets, as we use CMake's
standard mechanism for adding build rules to the build system, rather
than implementing our own layer of logic to exclude files not needed for
the target being built. Using this approach, if an MBED_TARGET is not
linked to using target_link_libraries its source files will not be
added to the build. This means custom target source can be added to the
user's application CMakeLists.txt without polluting the build system
when trying to compile for a standard MBED_TARGET.

NXP: Use armclang shebang in scatter files ...

The armclang shebang is required in the scatter file in order to build with CMake.

NXP: Fix heap size formula in scatter files ...

The heap size was incorrectly calculated.
This fixes it by subtracting the Stack size, any memory chunks allocated
before the start of the application (for vectors and/or crash report), and
finally the size of the application from the total RAM size.

CMake: Add support for LPC176X targets ...

All LPC176X targets supported by Mbed OS
can now be built with CMake.

Add SPDX license identifier to Arm files ...

Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.

Add license notice to Arm copyrighted source files ...

Scancode found missing license notices in our source files. This commit
addresses those issues by adding an Apache-2.0 notice to source files
highlighted.

Merge pull request #13492 from talorion/fix-PwmOut-resets-after-suspend ...

Fix pwm out resets after suspend

stack: armc: Workaround config passing bug ...

Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.

Use boot stack size from config system ...

To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.

Fixes #10319

pwmout - fixed compile errors

pwmout - LPC176X - add read methods for period and pulsewidth

Remove Ublox targets

Fix pin config for LPC1768

Remove XBED_LPC1768 target

Remove LPC1769 target

ARCH_PRO: Remove uARM tooolchain support ...

* Update scatter file for the ARM toolchain to use 2 region memory model.
  The scatter file changes affect the following boards:
    * LPC1768, ARCH_PRO, UBLOX_C027, XBED_LPC1768 (LPC1768.sct)
* Remove the TOOLCHAIN_ARM_MICRO directory.
* Remove release_version as not necessary and as the target can also run
  Mbed OS 6.
* Remove uARM toolchain in the list of supported toolchains for the target.
* Indicate that the target supports the small ARM toolchain C library.

Merge pull request #12639 from rajkan01/ethernethal_remove_deprecated ...

Remove the deprecated ethernet hal APIs

Added UBLOX modem api for power up modem UBLOX_C027

Remove the deprecated ethernet APIs

LPC1768: Fix ARM toolchain baremetal by defining 2 memory region ...

The changes are based on the scatter file in TOOLCHAIN_ARM_MICRO

NXP target: Replace UARTSerial references with BufferedSerial ...

`BufferedSerial` is `UARTSerial` renamed to convey the original purpose
of the class. It is the recommended buffered I/O serial class.