STM32: increase i2c slave rx limit. ...

Use uint16_t variables for i2c slave_rx_buffer_size and slave_rx_count
variables. This allows to receive more than 255 bytes in slave mode. The
bytes are received one by one in slave mode so there are no hardware
limitations forcing a 1 byte rx count limit.

STM32F2 remove non-UTF characters

Merge pull request #14688 from MubeenHCLite/CAN_rxinterrupt_fix ...

Solution for mutex problem in CAN read ISR

Resolved review comments

analogout: STM32: modified analogout_free api ...

removed hardcoded pins, implemented multi channel check
implemented DAC_2 initialization for H7 board
Added  #if defined DAC_CHANNEL_2

Merge branch 'master' into CAN_rxinterrupt_fix

Added Raw CAN (unlocked can read api) and updated the code for the ...

rxInterrupt to work for all CAN instances

Merge pull request #14659 from arduino/i2c_slave_patch ...

STM32: make i2c_salve_read return the number of bytes read

Add missing changes in objects.h file for others STM32 components

STM32: correct __cplusplus brackets in ci2c_device.h

STM32: correct __cplusplus brackets in can_device.h

Driver: I2C: STM32F4: Fix for every alternate i2c read failure in F2, F4 & L1 families. ...

This commit fixes the i2c driver issue reported in the below link:
https://github.com/ARMmbed/mbed-os/issues/13967 on STM32F4xx platform.

The data type of XferOperation has been changed from uint8_t to uint32_t
so that it can hold a 32bit value (for example: I2C_OTHER_FRAME or
I2C_OTHER_AND_LAST_FRAME).

Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>

Merge pull request #14480 from jeromecoutant/PR_STM32_STANDARD ...

STM32: Standard Pin Names

Merge pull request #14469 from jeromecoutant/PR_FLASH_PROGRAM ...

STM32: remove critical sections in flash_program_page

STM32F2: standard pin names

Updated TARGET_STM32 PeripheralPins.c and PeripheralPinMaps.h Replaced GPIO_PULLUP with GPIO_NOPULL in PinMap_PWM table

Merge pull request #14444 from jeromecoutant/PR_GPIO_FREE ...

STM32: reset GPIO value is analog mode

STM32: remove critical sections in flash_program_page

Update UART pin names & add MBED_CONF_TARGET_STDIO_UART overrides

Add standard pin-names validation script & tests

STM32 ANALOGOUT : correct GPIO free

STM32: AnalogOut: do not call HAL_DAC_Start in dac_write ...

dac_write (used by AnalogOut.write) calls HAL_DAC_Start
every time. It is required to call HAL_DAC_Start only once.
HAL_DAC_Start uses internally HAL_Delay(1) making AnalogOut
not suitable for use in high speed application.
This change removes call to HAL_DAC_Start in dac_write and
moves it to analogout_init.

STM32F2 - Add if defined check for USE_HAL_XXX_REGISTER_CALLBACKS

CMake STM32: fixing prefixes in the targets

CMake STM32: fix mbed-stm linking libs names

CMake STM32: fix missing mbed for some nucleo targets

CMake STM32: fix targets naming ...

Follow the naming for other CMake targets, using prefix mbed-, lower case with dashes

cmake: Refactor ST targets ...

Refactor all ST targets to be CMake buildsystem targets. This removes
the need for checking MBED_TARGET_LABELS repeatedly and allows us to be
more flexible in the way we include MBED_TARGET source in the build.

A side effect of this is it will allow us to support custom targets
without breaking the build for 'standard' targets, as we use CMake's
standard mechanism for adding build rules to the build system, rather
than implementing our own layer of logic to exclude files not needed for
the target being built. Using this approach, if an MBED_TARGET is not
linked to using `target_link_libraries` its source files will not be
added to the build. This means custom target source can be added to the
user's application CMakeLists.txt without polluting the build system
when trying to compile for a standard MBED_TARGET.

Merge pull request #14144 from sstaub/STM32-Arduino-Pinnames ...

Update for Arduino Pinnames

Merge pull request #14020 from pea-pod/stm-spi-more-bits ...

Add SPI bitwidths to ST targets where supported