STM32F3 - enable USB_DEVICE for NUCLEO_F303ZE

STM32F3: standard pin names

Updated TARGET_STM32 PeripheralPins.c and PeripheralPinMaps.h Replaced GPIO_PULLUP with GPIO_NOPULL in PinMap_PWM table

Update UART pin names & add MBED_CONF_TARGET_STDIO_UART overrides

Add standard pin-names validation script & tests

CMake STM32: fix missed targets with prefix

CMake STM32: fix missing mbed for some nucleo targets

CMake STM32: fix targets naming ...

Follow the naming for other CMake targets, using prefix mbed-, lower case with dashes

cmake: Refactor ST targets ...

Refactor all ST targets to be CMake buildsystem targets. This removes
the need for checking MBED_TARGET_LABELS repeatedly and allows us to be
more flexible in the way we include MBED_TARGET source in the build.

A side effect of this is it will allow us to support custom targets
without breaking the build for 'standard' targets, as we use CMake's
standard mechanism for adding build rules to the build system, rather
than implementing our own layer of logic to exclude files not needed for
the target being built. Using this approach, if an MBED_TARGET is not
linked to using `target_link_libraries` its source files will not be
added to the build. This means custom target source can be added to the
user's application CMakeLists.txt without polluting the build system
when trying to compile for a standard MBED_TARGET.

Update for Arduino Pinnames

STM: fix ARMClang sct files, using proper -E command ...

This is required for ARMClang, otherwise there is an error with unknown command.

CMake: add STM32F3 targets

STM32F3: CUBE V1.11.1

STM32F3: alignment with current CUBE V1.9.0

STM32F3: directory restructuration

Add SPDX license identifier to Arm files ...

Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.

Merge pull request #13583 from jeromecoutant/PR_ARDUINO_PIN ...

STM32: correct few Arduino pins value

stack: armc: Workaround config passing bug ...

Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.

Use boot stack size from config system ...

To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.

Fixes #10319

NUCLEO_F303ZE: wrong D1 pins

STM32F3 baremetal support

STM32 rename TOOLCHAIN_ARM_STD into TOOLCHAIN_ARM

ST Boards: Remove uARM tooolchain support ...

For NUCLEO_F401RE, NUCLEO_F411RE, NUCLEO_F303RE, and DISCO_L475VG_IOT01A:
* Ensure the scatter files for the ARM toolchain use 2 region memory model.
  The scatter files changes affects the following boards:
    * NUCLEO_F401RE, STEVAL_3DP001V1 (stm32f401xe.sct)
    * NUCLEO_F411RE, MTS_MDOT_F411RE, MTS_DRAGONFLY_F411RE, MTB_MTS_DRAGONFLY, SAKURAIO_EVB_01 (stm32f411re.sct)
    * NUCLEO_F303RE, NUCLEO_F303ZE (stm32f303xe.sct)
    * DISCO_L475VG_IOT01A, MTB_STM_L475 (stm32l475xx.sct)
* Remove the TOOLCHAIN_ARM_MICRO directories.
* Remove release_version as not necessary and as the targets can also run
  Mbed OS 6.
* Remove uARM support for all FAMILY_STM32 targets.

Disable Analogin D13(PA_5) on some NUCLEO targets ...

- pins are connected to the LED, can't be used as analogin

Enabling small C library option and deprecating uARM toolchain ...

- By default, Mbed OS build tools use standard C library for all supported toolchains.
   It is possible to use smaller C libraries by overriding the "target.default_lib" option
   with "small". This option is only currently supported for the GCC_ARM toolchain.
   This override config option is now extended in the build tool for ARM toolchain.
 - Add configuration option to specify libraries supported for each toolchain per targets.
 - Move __aeabi_assert function from rtos to retarget code so it’s available for bare metal.
 - Use 2 memory region model for ARM toolchain scatter file for the following targets:
   NUCLEO_F207ZG, STM32F411xE, STM32F429xI, NUCLEO_L073RZ, STM32F303xE
 - Add a warning message in the build tools to deprecate uARM toolchain.
 - NewLib-Nano C library is not supporting floating-point and printf with %hhd,%hhu,%hhX,%lld,%llu,%llX
   format specifier so skipping those green tea test cases.

Change explicit pinmap to static pinmap

Move GPIO_AF_NONE from PeripheralPins.h to PinNamesTypes.h

STM: Add support for internal ADC pins

NUCLEO_F303RE: Add explicit pinmap support

NUCLEO_F411RE, NUCLEO_L073RZ, NUCLEO_F303RE: Disable Analogin D13(PA_5) pin. ...

Analogin test fails on D13(PA_5) pin. When logic one (3.3V) is provided on this pin ADC reads 0.86 value. On other pins we got 0.98.
This is caused because this pin is connected to led2.