GPIO: Use uintptr_t for gpio_irq_api context ...

The HAL gpio_irq_api stores object IDs, which serve as a form of context
for the dispatch of the interrupt handler in the drivers level
InterruptIn Class. The way this is achieved is that the InterruptIn
Class casts its address to uint32_t, which is stored as the ID.
This results in compilation failure when the size of an object pointer
is greater than uint32_t, for example when building on a PC for unit
testing.

In order to allow Unit Testing of the InterruptIn Class, we replace the
use of uint32_t with uintptr_t (type capable of holding a pointer),
which allows portability and expresses intentions more clearly.
In aid of this latter goal, we also replace the use of the name "id"
with "context", to improve clarity - these are addresses of the context
related to that callback.

Update UART pin names & add MBED_CONF_TARGET_STDIO_UART overrides

Add standard pin-names validation script & tests

Remove erroneous object file reference in IRAM1 definition

Correct vector table and ram size definitions

Add bare metal support to Toshiba targets ...

Modify scatter files to specify heap load region and add small libraries
to list of supported libraries in target.json.# Please enter the commit message for your changes. Lines starting

CMake: Refactor Toshiba targets ...

Refactor all Toshiba targets to be CMake buildsystem targets. This removes
the need for checking MBED_TARGET_LABELS repeatedly and allows us to be
more flexible in the way we include MBED_TARGET source in the build.

A side effect of this is it will allow us to support custom targets
without breaking the build for 'standard' targets, as we use CMake's
standard mechanism for adding build rules to the build system, rather
than implementing our own layer of logic to exclude files not needed for
the target being built. Using this approach, if an MBED_TARGET is not
linked to using `target_link_libraries` its source files will not be
added to the build. This means custom target source can be added to the
user's application CMakeLists.txt without polluting the build system
when trying to compile for a standard MBED_TARGET.

CMake: add cmake support for Toshiba targets

Add SPDX license identifier to Arm files ...

Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.

Add license notice to Arm copyrighted source files ...

Scancode found missing license notices in our source files. This commit
addresses those issues by adding an Apache-2.0 notice to source files
highlighted.

Merge pull request #13492 from talorion/fix-PwmOut-resets-after-suspend ...

Fix pwm out resets after suspend

stack: armc: Workaround config passing bug ...

Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.

Use boot stack size from config system ...

To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.

Fixes #10319

pwmout - TMPM46B - add read methods for period and pulsewidth

TOSHIBA: Add hal_reset_reason_get_capabilities() ...

Override the default, weak implementation of
hal_reset_reason_get_capabilities() for TMPM066, TMPM3H6, TMPM3HQ,
TMPM46B & TMPM4G9.

Clean up ARM toolchain heap+stack setup in targets ...

ARM Compiler 6.13 testing revealed linker errors pointing out
conflicting use of `__user_setup_stackheap` and
`__user_initial_stackheap` in some targets. Remove the unwanted
`__user_initial_stackheap` from the targets - the setup is
centralised in the common platform code.

Looking into this, a number of other issues were highlighted

* Almost all targets had `__initial_sp` hardcoded in assembler,
  rather than getting it from the scatter file. This was behind
  issue #11313. Fix this generally.
* A few targets' `__initial_sp` values did not match the scatter
  file layout, in some cases meaning they were overlapping heap
  space. They now all use the area reserved in the scatter file.
  If any problems are seen, then there is an error in the
  scatter file.
* A number of targets were reserving unneeded space for heap and
  stack in their startup assembler, on top of the space reserved in
  the scatter file, so wasting a few K. A couple were using that
  space for the stack, rather than the space in the scatter file.

To clarify expected behaviour:

* Each scatter file contains empty regions `ARM_LIB_HEAP` and
  `ARM_LIB_STACK` to reserve space. `ARM_LIB_STACK` is sized
  by the macro `MBED_BOOT_STACK_SIZE`, which is set by the tools.
  `ARM_LIB_HEAP` is generally the space left over after static
  RAM and stack.
* The address of the end of `ARM_LIB_STACK` is written into the
  vector table and on reset the CPU sets MSP to that address.
* The common platform code in Mbed OS provides `__user_setup_stackheap`
  for the ARM library. The ARM library calls this during startup, and
  it calls `__mbed_user_setup_stackheap`.
* The default weak definition of `__mbed_user_setup_stackheap` does not
  modify SP, so we remain on the boot stack, and the heap is set to
  the region described by `ARM_LIB_HEAP`. If `ARM_LIB_HEAP` doesn't
  exist, then the heap is the space from the end of the used data in
  `RW_IRAM1` to the start of `ARM_LIB_STACK`.
* Targets can override `__mbed_user_setup_stackheap` if they want.
  Currently only Renesas (ARMv7-A class) devices do.
* If microlib is in use, then it doesn't call `__user_setup_stackheap`.
  Instead it just finds and uses `ARM_LIB_STACK` and `ARM_LIB_HEAP`
  itself.

Added new features to TMPM46B

Merge pull request #10857 from ARMmbed/feature-watchdog ...

Add Watchdog and ResetReason

HAL I2C: adds missing DEVICE_I2C guards

fix(hal-watchdog): Guard TMPM 'ResetReason' code behind feature flag

Added reset_reason feature for TMPM066 & TMPM46B

Fixed support for DigitalOut(NC) instantiation

Error check for reallocation memory fail

TARGET_TOSHIBA :Setup heap limit and size

Add HAL API for spi pinmap ...

Add the functions to get spi pinmaps to all targets.

Add HAL API for serial pinmap ...

Add the functions serial_tx_pinmap, serial_rx_pinmap, serial_cts_pinmap
and serial_rts_pinmap to all targets.

Add HAL API for pwmout pinmap ...

Add the function pwm_pinmap to all targets.

Add HAL API for i2c pinmap ...

Add the functions i2c_master_sda_pinmap, i2c_master_scl_pinmap,
i2c_slave_sda_pinmap and i2c_slave_scl_pinmap to all targets.

Add HAL API for analog in pinmap ...

Add the function analogin_pinmap to all targets.

Added MBED_APP_START to linker script