HACK: Use a packet size of 512 for USBMSD. ...

This is what the ST USBPhy code requires when using HS OTG.

Synchronize upstream changes - May 2023 edition (#160) ...

* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436

* Fix mesh connect semaphore not releasing causing blockage

* Add support of NSAPI_ICMP sockets in Nanostack

* STM32F1: add MCU_STM32F103xD support

* STM32F1: add MCU_STM32F103xG support

* test: Disable failing tests due to echo server

Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.

Signed-off-by: Saheer Babu <saheer.babu@arm.com>

* Check CAN DLC length value

* Fix default interface ID only being used partially

If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.

* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.

Signed-off-by: Yilin Sun <imi415@imi.moe>

* CAN: read only up to 8 bytes

If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.

This fixes https://github.com/ARMmbed/mbed-os/issues/15361

Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>

* STM32F303xC: add RAM_CCM in GCC linker script

* fix(drivers/emac): Remove incorrect RMII RX ER initialization

* fix(drivers/emac): Add missing SPDX indetifier to ST driver files

* fixed compiler inline issue

* Update Mbed version block

* removed HSE speed limitation for STM32G431RB

* Added HSE range validation for STM32g431xB

* added support for 4, 8 and 16MHz

* M487: Remove unused variable 'u32EscapeFrame'

Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings

* force FIFO IRQ for FDCan RX on H7

* Add hardware CRC support to STM32G4

* add support for Nucleo-H745ZI

* Update MAX32670 peripheral drivers with final ones that use by SDK

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* MAX32670 apply mbed required changes on peripheral drivers

Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>

* M467: Support CAN bus

1.  Update BSP CANFD driver
2.  Notes for implementation
    (1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
    (2) For Rx disabling multiple filter handles,
        1)  Map all filter handles to filter handle 0
        2)  Use Rx FIFO 0 for filter handle 0
    (3) For Rx enabling multiple filter handles,
        1)  Use Rx FIFO 0 for filter handle 0
        2)  Use Rx FIFO 1 for filter handle through first invoking can_filter()
        3)  Use dedicated Rx Buffer for other filter handles
        NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
    (4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
    (5) Support no CAN FD.

* Fix 'new[]' array freed with 'delete'

The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.

* Define default parameters of functions of derived class the same as the base class

The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.

* Avoid calling virtual functions from constructors and destructors

Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.

* Fix potentially overrunning write of sprintf

Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.

* Fix system_clock.c location

Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>

* Fix variable name

Signed-off-by: Jasper <jasper.jonker@wingtra.com>

* Change storage-class of secret_buf to static

Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.

* fix compiling errors of FATFileSystem when exFAT was enabled

* Add OSPI support for STM32H7

* Nuvoton: Enable extending sampling time for ADC/EADC

For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.

---------

Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>

More fixes for sleep and clocking stuff on MIMXRT105x (#158) ...

* More fixes for sleep and clocking stuff on MIMXRT105x

* Fix a couple of inadvertent changes

mbed-ce@master + fixes + gcc 11 support (#135) ...

* Fix rtos::Mutex stub, add trylock() method

* LowPowerTicker - Add ::attach(...) method + call callback

* mbed_power_management - rename sleep --> mbed_sleep to avoid conflicts

Fixes conflicts w/ unistd.h and boost::ut

* GCC 11/C++ 20 - Remove deprecated type_traits

* GCC 11/C++ 20 - Remove redundant templating of methods

* Warning - pragma ignore invalid-noreturn for unit tests

* Fix astyle errors

* Fix missing mbed_sleep() calls

Fix all Doxygen errors and make any future errors fatal (#118) ...

* Start working on fixing doxygen warnings

* Upgrade doxyfile to Doxygen 1.9.1

* Clean up some unmatched groups and add some exclusions

* Fix docs for rtos::ThisThread not showing up

* Fix up KV store docs

* Fix incorrect @files, some more incorrect groups

* Fix lots of broken links

* Start fixing mbedtls groups

* Fix more mbedtls docs

* Fix remaining mbedtls files with missing or incorrect grouping

* Fix a huge amount of PSA docs errors

* Fix a few more mbedtls docs errors

* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors

* Fix some broken doc links in HAL headers

* Fix more PSA doc errors

* Fix some doxygen errors in networking code

* Fix lots of network related doc errors

* Try and fix some CI failures

* Use Doxygen Action instead of doxygen in Mbed container to get the right version

* Try removing docs check

* Add first part of doxygen action

* Add next part of doxygen action

* Fix yaml syntax error

* Add in license check fix

* Try using verbose scancode

* Fix some more docs issues, workaround scancode-toolkit#3179

* Clean up the LoRaRadio get_state() function on each implementation.  Also fix some other compile and doc errors.

* Fix all remaining doxygen errors

* Fix escaping, for realsies this time

* Remove Doxygen unsupported config options, fix some more get_status() declarations

* Fix some UNITTESTS build errors

* Fix one more compile error

* Another unittest error

Clean up group/module definitions in doxygen (#97) ...

* Clean up group definitions in doxygen

* remove THIRD_PARTY_DOCS

* some stragglers

* fix astyle formatting

Enable Arduino Nano 33 BLE (#55) ...

* Add upload target for Arduino Nano 33 BLE, fix linker script preprocessing, add option for USB serial by default

* astyle error

* Use HINTS instead of PATHS so that the Arduino dir is searched first

* Enable OpenOCD and PyOCD for Nano 33 BLE in SWD mode

* Fix missing dependency for USB tests on Windows

* Add RAM defines for nrf52840

* Fix mbed-storage-kv-config depending on SD card library even if said library was not enabled

* Update dsrdtr value

* No longer need to modify linker script now that we aren't using whole-archive!

* Add OPENOCD_ADAPTER_SERIAL

* Add handling for cmsis dap

* Fix typo

* Fix weak symbol issue causing Bluetooth to not work.  In this case, the weak implementation can simply be removed, because there's no legitimate case where it is used.

Fix a few mistakes in the I2C docs. (#66)

Change default serial baudrate to 115200 (#58)

Fix the USB Mass Storage Device test so it can run as a CI user without root (#65)

Lots of usability improvements for the I2C API. Better docs and new top-level functions. (#64) ...

* Lots of usability improvements for the I2C API.  Better docs and new top-level functions.

* Document frequencies

* Tabs to spaces

* More style fixes

* Run astyle

* Clean up docs

* Add note about addressing, change 10 bit to 11 bit

* Fix spellcheck

* Fix paste error

* Oops, fix accidental change

Convert mbed-usb target, enable mbed-usb tests (#49) ...

* Convert mbed-usb target, enable mbed-usb tests

* Fix ByteBuffer compile error

* Add missing requirements, fix some pyserial issues

* Move CDC_ECM to its own target since it needs RTOS

Fix some build errors

Fix ABI differences between mbed-baremetal and mbed-os, remove PlatformMutex

Rename inconsistently named testing-related variables. Also fix STM32CUBE not working from application code.

Convert mbed-ble to STATIC

- Split mbed-core and mbed-rtos into -sources and -flags targets ...

- Fix some logic errors in top level cmakelists related to building greentea tests
- Fix mbed_create_distro() for OBJECT libraries

Clean up top-level build file and build options, fix build issues on MinGW

fix: typo in PwmOut.h (pulsewith -> pulsewidth)

add: PwmOut::read_pulsewitdth_us() for compatibility

rename: read_pulsewitdth_us to read_pulsewidth_us

GPIO: Use uintptr_t for gpio_irq_api context ...

The HAL gpio_irq_api stores object IDs, which serve as a form of context
for the dispatch of the interrupt handler in the drivers level
InterruptIn Class. The way this is achieved is that the InterruptIn
Class casts its address to uint32_t, which is stored as the ID.
This results in compilation failure when the size of an object pointer
is greater than uint32_t, for example when building on a PC for unit
testing.

In order to allow Unit Testing of the InterruptIn Class, we replace the
use of uint32_t with uintptr_t (type capable of holding a pointer),
which allows portability and expresses intentions more clearly.
In aid of this latter goal, we also replace the use of the name "id"
with "context", to improve clarity - these are addresses of the context
related to that callback.

InterruptIn: add note about enabling interrupts in rise/fall ...

Fixes #8188
Make it obvious, only calling rise/fall methods, IRQ are active. Nothing more needed.

CAN: Use uintptr_t for can_irq_ids ...

The HAL can_api stores an array of IDs in order to dispatch interrupts
to the correct CAN object. The drivers level CAN Class casts a pointer
to itself to an uint32_t, which is stored as the ID and then cast back
to a CAN * in order to call the correct handler. This results in
compilation failure when the size of an object pointer is greater than
uint32_t, for example when building on a PC for unit testing.

In order to allow Unit Testing of the CAN Class, we replace the use of
uint32_t with uintptr_t (type capable of holding a pointer), which
allows portability and expresses intentions more clearly. In aid of this
latter goal, we also replace the use of the name "id" with "context",
to improve clarity. These are addresses of the context related to that
callback.

QSPI: Move destructor into source file ...

This allows the entire QSPI class to be mocked/faked for unit testing
purpose, without dependencies from the real implementation such as
`qspi_free()` from the HAL.

drivers: Add missing OSPI.cpp to CMakeLists.txt

Merge pull request #14993 from hazzlim/unit_test_support ...

Add boilerplate unit test code to currently untested modules

Unit tests: Add boilerplate code for AnalogIn.cpp ...

In pursuit of increasing unit test coverage of Mbed OS, we add the
boilerplate code for unit testing of AnalogIn.cpp and an empty test
source file. This serves two purposes - it allows us to report on
currently untested sources in code coverage data, and it makes it a
little easier for developers to write unit tests for these sources.

The 'empty' test file contains a main function that simply returns. This
is required to allow CMake's add_executable() to be used to pull in the
source file for the SUT, which ensures that this source file is built
and therefore instrumented to generate coverage data. The alternative
that was explored was to instead use Google Test's TEST() macro and
prefix the test name with 'DISABLED_' to skip it, but that resulted in
the test being reported as skipped, which was deemed undesireable for
these 'empty' tests.

Add missing include for PinNames.h

CMake: greentea: Add skip reason to ticker test