/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef PLATFORM_DEF_H
#define PLATFORM_DEF_H
#include <arch.h>
#include <common_def.h>
#include <tbbr_img_def.h>
#define PLATFORM_STACK_SIZE 0x1000
#define PLATFORM_MAX_CPUS_PER_CLUSTER 2
#define PLATFORM_CLUSTER_COUNT 1
#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
#define PLATFORM_CLUSTER1_CORE_COUNT 0
#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \
PLATFORM_CLUSTER1_CORE_COUNT)
#define WARP7_PRIMARY_CPU 0
#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \
PLATFORM_CORE_COUNT)
#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1
#define PLAT_MAX_RET_STATE 1
#define PLAT_MAX_OFF_STATE 2
/* Local power state for power domains in Run state. */
#define PLAT_LOCAL_STATE_RUN 0
/* Local power state for retention. Valid only for CPU power domains */
#define PLAT_LOCAL_STATE_RET 1
/*
* Local power state for OFF/power-down. Valid for CPU and cluster power
* domains.
*/
#define PLAT_LOCAL_STATE_OFF 2
/*
* Macros used to parse state information from State-ID if it is using the
* recommended encoding for State-ID.
*/
#define PLAT_LOCAL_PSTATE_WIDTH 4
#define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
/*
* Some data must be aligned on the biggest cache line size in the platform.
* This is known only to the platform as it might have a combination of
* integrated and external caches.
* i.MX7 has a 32 byte cacheline size
* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1, 08/2016 pg 244
*/
#define CACHE_WRITEBACK_SHIFT 4
#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
/*
* Partition memory into secure BootROM, OCRAM_S, non-secure DRAM, secure DRAM
*/
#define BOOT_ROM_BASE 0x00000000
#define BOOT_ROM_SIZE 0x00020000
#define OCRAM_S_BASE 0x00180000
#define OCRAM_S_SIZE 0x00008000
/* Controller maps 2GB, board contains 512 MB. 0x80000000 - 0xa0000000 */
#define DRAM_BASE 0x80000000
#define DRAM_SIZE 0x20000000
#define DRAM_LIMIT (DRAM_BASE + DRAM_SIZE)
/* Place OPTEE at minus 32 MB from the end of memory. 0x9e000000 - 0xa0000000 */
#define WARP7_OPTEE_SIZE 0x02000000
#define WARP7_OPTEE_BASE (DRAM_LIMIT - WARP7_OPTEE_SIZE)
#define WARP7_OPTEE_LIMIT (WARP7_OPTEE_BASE + WARP7_OPTEE_SIZE)
/* Place ATF directly beneath OPTEE. 0x9df00000 - 0x9e000000 */
#define BL2_RAM_SIZE 0x00100000
#define BL2_RAM_BASE (WARP7_OPTEE_BASE - BL2_RAM_SIZE)
#define BL2_RAM_LIMIT (BL2_RAM_BASE + BL2_RAM_SIZE)
/* Optional Mailbox. Only relevant on i.MX7D. 0x9deff000 - 0x9df00000*/
#define SHARED_RAM_SIZE 0x00001000
#define SHARED_RAM_BASE (BL2_RAM_BASE - SHARED_RAM_SIZE)
#define SHARED_RAM_LIMIT (SHARED_RAM_BASE + SHARED_RAM_SIZE)
/* Define the absolute location of u-boot 0x87800000 - 0x87900000 */
#define WARP7_UBOOT_SIZE 0x00100000
#define WARP7_UBOOT_BASE (DRAM_BASE + 0x7800000)
#define WARP7_UBOOT_LIMIT (WARP7_UBOOT_BASE + WARP7_UBOOT_SIZE)
/* Define FIP image absolute location 0x80000000 - 0x80100000 */
#define WARP7_FIP_SIZE 0x00100000
#define WARP7_FIP_BASE (DRAM_BASE)
#define WARP7_FIP_LIMIT (WARP7_FIP_BASE + WARP7_FIP_SIZE)
/* Define FIP image location at 1MB offset */
#define WARP7_FIP_MMC_BASE (1024 * 1024)
/* Define the absolute location of DTB 0x83000000 - 0x83100000 */
#define WARP7_DTB_SIZE 0x00100000
#define WARP7_DTB_BASE (DRAM_BASE + 0x03000000)
#define WARP7_DTB_LIMIT (WARP7_DTB_BASE + WARP7_DTB_SIZE)
/*
* BL2 specific defines.
*
* Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
* size plus a little space for growth.
*/
#define BL2_BASE BL2_RAM_BASE
#define BL2_LIMIT (BL2_RAM_BASE + BL2_RAM_SIZE)
/*
* BL3-2/OPTEE
*/
# define BL32_BASE WARP7_OPTEE_BASE
# define BL32_LIMIT (WARP7_OPTEE_BASE + WARP7_OPTEE_SIZE)
/*
* BL3-3/U-BOOT
*/
#define BL33_BASE WARP7_UBOOT_BASE
#define BL33_LIMIT (WARP7_UBOOT_BASE + WARP7_UBOOT_SIZE)
/*
* ATF's view of memory
*
* 0xa0000000 +-----------------+
* | DDR | BL32/OPTEE
* 0x9e000000 +-----------------+
* | DDR | BL23 ATF
* 0x9df00000 +-----------------+
* | DDR | Shared MBOX RAM
* 0x9de00000 +-----------------+
* | DDR | Unallocated
* 0x87900000 +-----------------+
* | DDR | BL33/U-BOOT
* 0x87800000 +-----------------+
* | DDR | Unallocated
* 0x83100000 +-----------------+
* | DDR | DTB
* 0x83000000 +-----------------+
* | DDR | Unallocated
* 0x80100000 +-----------------+
* | DDR | FIP
* 0x80000000 +-----------------+
* | SOC I/0 |
* 0x00a00000 +-----------------+
* | OCRAM | Not used
* 0x00900000 +-----------------+
* | SOC I/0 |
* 0x00188000 +-----------------+
* | OCRAM_S | Not used
* 0x00180000 +-----------------+
* | SOC I/0 |
* 0x00020000 +-----------------+
* | BootROM | BL1
* 0x00000000 +-----------------+
*/
#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
#define MAX_MMAP_REGIONS 10
#define MAX_XLAT_TABLES 6
#define MAX_IO_DEVICES 2
#define MAX_IO_HANDLES 3
#define MAX_IO_BLOCK_DEVICES 1
/* UART defines */
#if PLAT_WARP7_UART == 1
#define PLAT_WARP7_UART_BASE MXC_UART1_BASE
#elif PLAT_WARP7_UART == 6
#define IMX_UART_DTE
#define PLAT_WARP7_UART_BASE MXC_UART6_BASE
#else
#error "define PLAT_WARP7_UART=1 or PLAT_WARP7_UART=6"
#endif
#define PLAT_WARP7_BOOT_UART_BASE PLAT_WARP7_UART_BASE
#define PLAT_WARP7_BOOT_UART_CLK_IN_HZ 24000000
#define PLAT_WARP7_CONSOLE_BAUDRATE 115200
/* MMC defines */
#ifndef PLAT_WARP7_SD
#define PLAT_WARP7_SD 3
#endif
#if PLAT_WARP7_SD == 1
#define PLAT_WARP7_BOOT_MMC_BASE USDHC1_BASE
#endif /* PLAT_WARP7_SD == 1 */
#if PLAT_WARP7_SD == 2
#define PLAT_WARP7_BOOT_MMC_BASE USDHC2_BASE
#endif /* PLAT_WARP7_SD == 2 */
#if PLAT_WARP7_SD == 3
#define PLAT_WARP7_BOOT_MMC_BASE USDHC3_BASE
#endif /* PLAT_WARP7_SD == 3 */
/*
* GIC related constants
*/
#define GICD_BASE 0x31001000
#define GICC_BASE 0x31002000
#define GICR_BASE 0
/*
* System counter
*/
#define SYS_COUNTER_FREQ_IN_TICKS 8000000 /* 8 MHz */
#endif /* PLATFORM_DEF_H */
