arm: Shorten the Firmware Update (FWU) process
The watchdog is configured with a default value of 256 seconds in order to implement the Trusted Board Boot Requirements. For the FVP and Juno platforms, the FWU process relies on a watchdog reset. In order to automate the test of FWU, the length of this process needs to be as short as possible. Instead of waiting for those 4 minutes to have a reset by the watchdog, tell it to reset immediately. There are no side effects as the value of the watchdog's load register resets to 0xFFFFFFFF. Tested on Juno. Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com> |
---|
|
include/plat/arm/common/plat_arm.h |
---|
plat/arm/board/a5ds/a5ds_err.c 0 → 100644 |
---|
plat/arm/board/a5ds/platform.mk |
---|
plat/arm/board/fvp/fvp_bl1_setup.c |
---|
plat/arm/board/fvp/fvp_err.c 0 → 100644 |
---|
plat/arm/board/fvp/platform.mk |
---|
plat/arm/board/fvp_ve/fvp_ve_err.c 0 → 100644 |
---|
plat/arm/board/fvp_ve/platform.mk |
---|
plat/arm/board/juno/juno_bl1_setup.c |
---|
plat/arm/board/juno/juno_err.c |
---|
plat/arm/board/juno/platform.mk |
---|
plat/arm/board/rde1edge/platform.mk |
---|
plat/arm/board/rde1edge/rde1edge_err.c 0 → 100644 |
---|
plat/arm/board/rdn1edge/platform.mk |
---|
plat/arm/board/rdn1edge/rdn1edge_err.c 0 → 100644 |
---|
plat/arm/board/sgi575/platform.mk |
---|
plat/arm/board/sgi575/sgi575_err.c 0 → 100644 |
---|
plat/arm/board/sgm775/platform.mk |
---|
plat/arm/board/sgm775/sgm775_err.c 0 → 100644 |
---|
plat/arm/common/arm_err.c |
---|