Tegra: group platform settings together ...

This patch groups all the platform configuration macros into
the common platform.mk makefile.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Merge pull request #917 from soby-mathew/sm/sys_susp_css ...

CSS: Allow system suspend only via PSCI SYSTEM_SUSPEND API

Merge pull request #907 from antonio-nino-diaz-arm/an/smc-ret0 ...

tspd:FWU:Fix usage of SMC_RET0

Merge pull request #900 from vwadekar/ti-uart-bug-fix ...

drivers: ti: uart: remove UART_FCR read-modify-write

Merge pull request #914 from afaerber/align-hex ...

fiptool: Support non-decimal --align arguments

Merge pull request #901 from vwadekar/freebsd-stdbool-header ...

lib: stdbool header from the FreeBSD project

Merge pull request #911 from danh-arm/dh/refactor-bl2-image-load ...

Minor refactor of BL2 image load v2

Merge pull request #909 from sandrine-bailleux-arm/sb/xlat-lib-misc-improvements ...

xlat lib: Use mmap_attr_t type consistently

CSS: Allow system suspend only via PSCI SYSTEM_SUSPEND API ...

The CSS power management layer previously allowed to suspend system
power domain level via both PSCI CPU_SUSPEND and PSCI SYSTEM_SUSPEND
APIs. System suspend via PSCI CPU_SUSPEND was always problematic to
support because of issues with targeting wakeup interrupts to
suspended cores before the per-cpu GIC initialization is done. This
is not the case for PSCI SYSTEM_SUSPEND API because all the other
cores are expected to be offlined prior to issuing system suspend and
PSCI CPU_ON explicit calls will be made to power them on. Hence the Juno
platform used to downgrade the PSCI CPU_SUSPEND request for system
power domain level to cluster level by overriding the default
`plat_psci_pm_ops` exported by CSS layer.

Given the direction the new CSS platforms are evolving, it is best to
limit the system suspend only via PSCI SYSTEM_SUSPEND API for all
CSS platforms. This patch makes changes to allow system suspend
only via PSCI SYSTEM_SUSPEND API. The override of `plat_psci_ops`
for Juno is removed.

Change-Id: Idb30eaad04890dd46074e9e888caeedc50a4b533
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

fiptool: Support non-decimal --align arguments ...

An alignment value of 0x4000 is much easier to type than 16384,
so enhance get_image_align() to recognize a 0x prefix for hexadecimals.

Signed-off-by: Andreas Färber <afaerber@suse.de>

drivers: ti: uart: remove UART_FCR writes ...

This patch removes the code that touched UART_FCR, from
console_core_putc(). The check for whether transmit FIFO is
full is sufficient before writing to UART TX FIFO. In fact
setting UARTFCR_TXCLR immediately after a byte is written to
FIFO might even result in loss of that byte, if UART hasn't
sent that byte out yet.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Merge pull request #912 from vwadekar/tegra-smmu-ctx-save-robust ...

Tegra: smmu: make the context save sequence robust

Merge pull request #910 from dp-arm/dp/AArch32-juno-port ...

Add AArch32 support for Juno

Merge pull request #902 from vwadekar/tegra186-sip-mce-calls ...

Tegra186: Support AARCH32/64 encoding for MCE calls

Merge pull request #898 from soby-mathew/sm/dcache-early ...

PSCI: Build option to enable D-Caches early in warmboot

Merge pull request #903 from antonio-nino-diaz-arm/an/build-xlat-v1 ...

ARM platforms: Add option to use xlat tables lib v1

Merge pull request #906 from antonio-nino-diaz-arm/an/asserts-release ...

Add `ENABLE_ASSERTIONS` build option

Tegra: smmu: make the context save sequence robust ...

This patch sanity checks the SMMU context created by the platform
code. The first entry contains the size of the array; which the
driver now verifies before moving on with the save.

This patch also fixes an error in the calculation of the size of
the context that gets copied to TZDRAM.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

AArch32: Add SP_MIN support for JUNO ...

This patch adds support for SP_MIN on JUNO platform.
The changes include addition of AArch32 assembly files,
JUNO specific SP_MIN make file and miscellaneous changes
in ARM platform files to enable support for SP_MIN.

Change-Id: Id1303f422fc9b98b9362c757b1a4225a16fffc0b
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

Changes to support execution in AArch32 state for JUNO ...

Following steps are required to boot JUNO in AArch32 state:
1> BL1, in AArch64 state, loads BL2.
2> BL2, in AArch64 state, initializes DDR.
  Loads SP_MIN & BL33 (AArch32 executable)images.
  Calls RUN_IMAGE SMC to go back to BL1.
3> BL1 writes AArch32 executable opcodes, to load and branch
  at the entrypoint address of SP_MIN, at HI-VECTOR address and
  then request for warm reset in AArch32 state using RMR_EL3.

This patch makes following changes to facilitate above steps:
* Added assembly function to carry out step 3 above.
* Added region in TZC that enables Secure access to the
  HI-VECTOR(0xFFFF0000) address space.
* AArch32 image descriptor is used, in BL2, to load
  SP_MIN and BL33 AArch32 executable images.

A new flag `JUNO_AARCH32_EL3_RUNTIME` is introduced that
controls above changes. By default this flag is disabled.

NOTE: BL1 and BL2 are not supported in AArch32 state for JUNO.

Change-Id: I091d56a0e6d36663e6d9d2bb53c92c672195d1ec
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

AArch32: Add support for ARM Cortex-A53/57/72 MPCore Processor ...

This patch adds AArch32 state support for ARM Cortex-A53,
Cortex-A57 and Cortex-A72 MPCore Processor in the CPU specific
operations framework.

NOTE: CPU errata handling code is not present in this patch.

Change-Id: I01eb3e028e40dde37565707ebc99e06e7a0c113d
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

css: Ensure PSCI system off/reset is not interrupted ...

If there is a pending interrupt, it is possible for the AP to come out
of the final WFI before SCP has a chance to act on it.  Prevent this
by disabling the GIC CPU interface before issuing a WFI.

Previously, SCP would not wait on WFI before taking an action but
would shut down the core or system regardless.

Change-Id: Ib0bcf69a515d540ed4f73c11e40ec7c863e39c92
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

xlat lib: Use mmap_attr_t type consistently ...

This patch modifies both versions of the translation table library
to use the mmap_attr_t type consistently wherever it is manipulating
MT_* attributes variables. It used to use mmap_attr_t or plain integer
types interchangeably, which compiles fine because an enumeration type
can be silently converted to an integer, but which is semantically
incorrect.

This patch removes this assumption by using the abstract type
'mmap_attr_t' all the time.

Change-Id: Id1f099025d2cb962b275bb7e39ad2c4dbb4e366c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Control inclusion of helper code used for asserts ...

Many asserts depend on code that is conditionally compiled based on the
DEBUG define. This patch modifies the conditional inclusion of such code
so that it is based on the ENABLE_ASSERTIONS build option.

Change-Id: I6406674788aa7e1ad7c23d86ce94482ad3c382bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Remove build option `ASM_ASSERTION` ...

The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.

All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.

ASM_ASSERTION has been removed from the user guide.

Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

tspd:FWU:Fix usage of SMC_RET0 ...

SMC_RET0 should only be used when the SMC code works as a function that
returns void. If the code of the SMC uses SMC_RET1 to return a value to
signify success and doesn't return anything in case of an error (or the
other way around) SMC_RET1 should always be used to return clearly
identifiable values.

This patch fixes two cases in which the code used SMC_RET0 instead of
SMC_RET1.

It also introduces the define SMC_OK to use when an SMC must return a
value to tell that it succeeded, the same way as SMC_UNK is used in case
of failure.

Change-Id: Ie4278b51559e4262aced13bbde4e844023270582
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #904 from vwadekar/tegra-smmu-ctx-size-fix ...

Tegra: smmu: fix the size used to save context

lib: stdbool header from the FreeBSD project ...

This patch pulls the stdbool.h header file from the FreeBSD
project. The platforms require this header to fix many MISRA
defects among other things.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: smmu: fix the size used to save context ...

This patch fixes the size used to save the context, when the
device enters System Suspend.

Reported by: David Cunado

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Minor refactor of BL2 image load v2 ...

Previously, get_next_bl_params_from_mem_params_desc() populated arg0
in the EL3 runtime entrypoint with a bl_params_t pointer. This is the
responsibility of the generic LOAD_IMAGE_V2 framework instead of the
descriptor-based image loading utility functions. Therefore this patch
moves that code to bl2_load_images().

Also, this patch moves the code that flushes the bl_params structure to
flush_bl_params_desc(), together with the other descriptor-based image
loading flushing code.

Change-Id: I4541e3f50e3878dde7cf89e9e8f31fe0b173fb9d
Signed-off-by: Dan Handley <dan.handley@arm.com>