FVP: Add BL2 hash calculation in BL1 ...

This patch provides support for measured boot by adding calculation
of BL2 image hash in BL1 and writing these data in TB_FW_CONFIG DTB.

Change-Id: Ic074a7ed19b14956719c271c805b35d147b7cec1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Merge "fconf: Clean Arm IO" into integration

Merge "plat/sgi: Bump bl1 RW limit" into integration

Merge "spmd: skip loading of secure partitions on pre-v8.4 platforms" into integration

spmd: skip loading of secure partitions on pre-v8.4 platforms ...

When SPD=spmd and SPMD_SPM_AT_SEL2=0, that is SPMC sits at S-EL1
then there is no need for TF-A to load secure partitions individually.
In this configuration, SPMC handles secure partition loading at
S-EL1/EL0 levels.

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06a0d88a4811274a8c347ce57b56bb5f64e345df

Merge changes from topic "static_analysis" into integration ...

* changes:
  io: io_stm32image: correct possible NULL pointer dereference
  plat/st: correctly check pwr-regulators node
  nand: stm32_fmc2_nand: correct xor_ecc.val assigned value
  plat/st: correct static analysis tool warning
  raw_nand: correct static analysis tool warning
  spi: stm32_qspi: correct static analysis issues

plat/st: correctly check pwr-regulators node ...

This warning was issued by cppcheck in our downstream code:
[plat/st/common/stm32mp_dt.c:629] -> [plat/st/common/stm32mp_dt.c:634]:
 (warning) Identical condition 'node<0', second condition is always false

The second test has to check variable pwr_regulators_node.

Change-Id: I4a20c4a3ac0ef0639c2df36309d90a61c02b511f
Signed-off-by: Yann Gautier <yann.gautier@st.com>

plat/st: correct static analysis tool warning ...

Correct the following sparse warnings:
plat/st/common/stm32mp_dt.c:103:5: warning:
 symbol 'fdt_get_node_parent_address_cells' was not declared.
 Should it be static?
plat/st/common/stm32mp_dt.c:123:5: warning:
 symbol 'fdt_get_node_parent_size_cells' was not declared.
 Should it be static?

As those 2 functions are only used by assert(), put them under
ENABLE_ASSERTIONS flag.

Change-Id: Iad721f12128df83a3de3f53e7920a9c1dce64c56
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Merge "allwinner: H6: Fix GPIO and CCU memory map addresses" into integration

Merge changes from topic "tegra-downstream-03192020" into integration ...

* changes:
  Tegra194: move cluster and CPU counter to header file.
  Tegra: gicv2: initialize target masks
  spd: tlkd: support new TLK SMCs for RPMB service
  Tegra210: trigger CPU0 hotplug power on using FC
  Tegra: memctrl: cleanup streamid override registers
  Tegra: memctrl_v2: remove support to secure TZSRAM
  Tegra: include platform headers from individual makefiles
  Tegra210: rename ENABLE_WDT_LEGACY_FIQ_HANDLING macro
  Tegra194: SiP function ID to read SMMU_PER registers
  Tegra: memctrl: map video memory as uncached
  Tegra: remove support for USE_COHERENT_MEM
  Tegra: remove circular dependency with common_def.h
  Tegra: include missing stdbool.h
  Tegra: remove support for SEPARATE_CODE_AND_RODATA=0

Merge "plat/arm/sgi: mark remote chip shared ram as non-cacheable" into integration

Merge changes I8ca411d5,Ib5f5dd81,I0488e22c into integration ...

* changes:
  plat: imx: imx8qm: apply clk/pinmux configuration for DEBUG_CONSOLE
  plat: imx: imx8qm: provide debug uart num as build param
  plat: imx: imx8_iomux: fix shift-overflow errors

allwinner: H6: Fix GPIO and CCU memory map addresses ...

The base address for both the GPIO and the clock unit of the H6 memory map
have been typo-ed. Fix them to match the Linux DT and the manual.

The H6 code use neither of them, so this doesn't change or fix anything
in the real world, but should be corrected anyway.

The issue was found and reported by Github user "armlabs".

Change-Id: Ic6fdfb732ce1cfc54cbb927718035624a06a9e08
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Tegra194: move cluster and CPU counter to header file. ...

MISRA rules request that the cluster and CPU counter be unsigned
values and have a suffix 'U'. If the define located in the makefile,
this cannot be done.

This patch moves the PLATFORM_CLUSTER_COUNT and PLATFORM_MAX_CPUS_PER_CLUSTER
macros to tegra_def.h as a result.

Change-Id: I9ef0beb29485729de204b4ffbb5241b039690e5a
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>

Tegra: gicv2: initialize target masks ...

This patch initializes the target masks in the GICv2 driver
data, for all PEs. This will allow platforms to set the PE
target for SPIs.

Change-Id: I7bf2ad79c04c2555ab310acba17823fb157327a3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra210: trigger CPU0 hotplug power on using FC ...

Hotplug poweron is not working for boot CPU as it's being
triggerred using PMC and not with Flow Controller. This is
happening because "cpu_powergate_mask" is only getting set
for non-boot CPU's as the boot CPU's first bootup follows
different code path. The patch is marking a CPU as ON within
"cpu_powergate_mask" when turning its power domain on
during power on. This will ensure only first bootup on all
CPU's is using PMC and subsequent hotplug poweron will be
using Flow Controller.

Change-Id: Ie9e86e6f9a777d41508a93d2ce286f31307932c2
Signed-off-by: sumitg <sumitg@nvidia.com>

Tegra: memctrl: cleanup streamid override registers ...

Streamid override registers are passed to memctrl to program bypass
streamid for all the registers. There is no reason to bypass SMMU
for any of the client so need to remove register list and do not
set streamid_override_cfg.

Some Tegra186 platforms don't boot due to SDMMC failure so keep SDMMC
bypass as of now. Will revisit once these issues are fixed.

Change-Id: I3f67e2a0e1b53160e2218f3acace7da45532f934
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

Tegra: memctrl_v2: remove support to secure TZSRAM ...

This patch removes support to secure the on-chip TZSRAM memory for
Tegra186 and Tegra194 platforms as the previous bootloader does that
for them.

Change-Id: I50c7b7f9694285fe31135ada09baed1cfedaaf07
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: include platform headers from individual makefiles ...

This patch modifies PLAT_INCLUDES to include individual Tegra SoC
headers from the platform's makefile.

Change-Id: If5248667f4e58ac18727d37a18fbba8e53f2d7b5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra210: rename ENABLE_WDT_LEGACY_FIQ_HANDLING macro ...

This patch renames 'ENABLE_WDT_LEGACY_FIQ_HANDLING' macro to
'ENABLE_TEGRA_WDT_LEGACY_FIQ_HANDLING', to indicate that this
is a Tegra feature.

Change-Id: I5c4431e662223ee80efbfd5ec2513f8b1cadfc50
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra194: SiP function ID to read SMMU_PER registers ...

This patch introduces SiP function ID, 0xC200FF00, to read SMMU_PER
error records from all supported SMMU blocks.

The register values are passed over to the client via CPU registers
X1 - X3, where

X1 = SMMU_PER[instance #1] | SMMU_PER[instance #0]
X2 = SMMU_PER[instance #3] | SMMU_PER[instance #2]
X3 = SMMU_PER[instance #5] | SMMU_PER[instance #4]

Change-Id: Id56263f558838ad05f6021f8432e618e99e190fc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: memctrl: map video memory as uncached ...

Memmap video memory as uncached normal memory by adding flag
'MT_NON_CACHEABLE' in mmap_add_dynamic_region().
This improves the time taken for clearing the non-overlapping video
memory:

test conditions: 32MB memory size, EMC running at 1866MHz, t186
1) without MT_NON_CACHEABLE: 30ms ~ 40ms
<3>[  133.852885]  vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[  133.860471] _tegra_set_vpr_params[120]: begin
<3>[  133.896481] _tegra_set_vpr_params[123]: end
<3>[  133.908944]  vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[  133.916397] _tegra_set_vpr_params[120]: begin
<3>[  133.956369] _tegra_set_vpr_params[123]: end
<3>[  133.970394]  vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[  133.977934] _tegra_set_vpr_params[120]: begin
<3>[  134.013874] _tegra_set_vpr_params[123]: end
<3>[  134.025666]  vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[  134.033512] _tegra_set_vpr_params[120]: begin
<3>[  134.065996] _tegra_set_vpr_params[123]: end
<3>[  134.075465]  vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[  134.082923] _tegra_set_vpr_params[120]: begin
<3>[  134.113119] _tegra_set_vpr_params[123]: end
<3>[  134.123448]  vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[  134.130790] _tegra_set_vpr_params[120]: begin
<3>[  134.162523] _tegra_set_vpr_params[123]: end
<3>[  134.172413]  vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[  134.179772] _tegra_set_vpr_params[120]: begin
<3>[  134.209142] _tegra_set_vpr_params[123]: end

2) with MT_NON_CACHEABLE: 10ms ~ 18ms
<3>[  102.108702]  vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[  102.116296] _tegra_set_vpr_params[120]: begin
<3>[  102.134272] _tegra_set_vpr_params[123]: end
<3>[  102.145839]  vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[  102.153226] _tegra_set_vpr_params[120]: begin
<3>[  102.164201] _tegra_set_vpr_params[123]: end
<3>[  102.172275]  vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[  102.179638] _tegra_set_vpr_params[120]: begin
<3>[  102.190342] _tegra_set_vpr_params[123]: end
<3>[  102.197524]  vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[  102.205085] _tegra_set_vpr_params[120]: begin
<3>[  102.216112] _tegra_set_vpr_params[123]: end
<3>[  102.224080]  vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[  102.231387] _tegra_set_vpr_params[120]: begin
<3>[  102.241775] _tegra_set_vpr_params[123]: end
<3>[  102.248825]  vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[  102.256069] _tegra_set_vpr_params[120]: begin
<3>[  102.266368] _tegra_set_vpr_params[123]: end
<3>[  102.273400]  vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[  102.280672] _tegra_set_vpr_params[120]: begin
<3>[  102.290929] _tegra_set_vpr_params[123]: end

Change-Id: I5f604064ce7b8b73ea9ad5860156ae5e2c6cc42a
Signed-off-by: Ken Chang <kenc@nvidia.com>

Tegra: remove support for USE_COHERENT_MEM ...

This patch removes the support for 'USE_COHERENT_MEM' as
Tegra platforms no longer support the feature.

Change-Id: If1c80fc4e5974412572b3bc1fdf9e70b1ee5d4ec
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

Tegra: remove circular dependency with common_def.h ...

This patch stops including common_def.h from platform_def.h to
fix a circular depoendency between them.

This means platform_def.h now has to define the linker macros:
* PLATFORM_LINKER_FORMAT
* PLATFORM_LINKER_ARCH

Change-Id: Icd540b1bd32fb37e0e455e9146c8b7f4b314e012
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: include missing stdbool.h ...

This patch includes the missing stdbool.h header from flowctrl.h
and bpmp_ivc.c files.

Change-Id: If60d19142b1cb8ae663fbdbdf1ffe45cbbdbc1b2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: remove support for SEPARATE_CODE_AND_RODATA=0 ...

Tegra platforms will not be supporting SEPARATE_CODE_AND_RODATA=0.

This patch uses the common macros provided by bl_common.h as a result
and adds a check to assert if SEPARATE_CODE_AND_RODATA set is not set
to '1'.

Change-Id: I376ea60c00ad69cb855d89418bdb80623f14800e
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>

Merge "fvp: use two instances of Cactus at S-EL1" into integration

Merge "spmc: manifest changes to support two sample cactus secure partitions" into integration

fvp: use two instances of Cactus at S-EL1 ...

To demonstrate communication between SP's two instances of Cactus at
S-EL1 has been used.
This patch replaces Ivy SP with cactus-secondary SP which aligns with
changes in tf-a-tests repository.

Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Iee84f1f7f023b7c4f23fbc13682a42614a7f3707

spmc: manifest changes to support two sample cactus secure partitions ...

When using the SPM Dispatcher, the SPMC sits as a BL32 component
(BL32_IMAGE_ID). The SPMC manifest is passed as the TOS fw config
component (TOS_FW_CONFIG_ID). It defines platform specific attributes
(memory range and physical CPU layout) as well as the attributes for
each secure partition (mostly load address). This manifest is passed
to the SPMC on boot up. An SP package contains the SP dtb in the SPCI
defined partition manifest format. As the SPMC manifest was enriched
it needs an increase of tos_fw-config max-size in fvp_fw_config dts.

Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ia1dce00c6c4cbaa118fa56617980d32e2956a94e