Merge "plat: imx: imx8qx: provide debug uart num as build param" into integration

Merge "Update code freeze and release target date for 2.3" into integration

Merge "xlat_tables_v2: add enable_mmu()" into integration

Merge "Add get_current_el_maybe_constant()" into integration

Merge "Build: define IMAGE_AT_EL1 or IMAGE_AT_EL3 globally for C files" into integration

Update code freeze and release target date for 2.3 ...

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: Icf0a5737852e4f025dd8ce3748594ad25da43045

Merge "fconf: exclude fconf_dyn_cfg_getter.c from BL1_SOURCES" into integration

Merge "bl32: sp_min: reduce the alignment for fconf_populator" into integration

Merge "plat: pass -D option to BL*_CPPFLAGS instead of BL*_CFLAGS" into integration

Merge "Build: introduce per-BL CPPFLAGS and ASFLAGS" into integration

Merge "Create separate header for ARM specific SMCCC defines" into integration

Merge "Makefile: don't use $(CC) before value is explicit set" into integration

Makefile: don't use $(CC) before value is explicit set ...

Unless specified in the environment, $(CC) expands to some generic
host C compiler like cc or c99. We set our own value for $(CC), but
only few lines later.

Move the first use of the $(CC) variable behind the definition to
correct this.

Change-Id: I45344e063d21ddfe22b7ad77954e85c1c46087bd
Fixes: 1684b8733 ("Use clang assembler when clang compiler is used")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

Merge "TF-A GICv3 driver: Introduce makefile" into integration

Merge "Tegra: fixup GIC init from the 'on_finish' handler" into integration

Merge "Tegra186: increase memory mapped regions" into integration

fconf: exclude fconf_dyn_cfg_getter.c from BL1_SOURCES ...

fconf_dyn_cfg_getter.c calls FCONF_REGISTER_POPULATOR(), which populates
the fconf_populator structure.

However, bl1/bl1.ld.S does not have:

        __FCONF_POPULATOR_START__ = .;
        KEEP(*(.fconf_populator))
        __FCONF_POPULATOR_END__ = .;

So, this is not linked to bl1.elf

We could change either bl1/bl1.lds.S or lib/fconf/fconf.mk to make
them consistent.

I chose to fix up fconf.mk to keep the current behavior.

This is a groundwork to factor out the common code from linker scripts.

Change-Id: I07b7ad4db4ec77b57acf1588fffd0b06306d7293
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

bl32: sp_min: reduce the alignment for fconf_populator ...

sp_min.ld.S is used for aarch32.

ALIGN(4) is used for alignment of the other structures. I do not think
struct fconf_populator is a special case. Let's use ALIGN(4) here too.

Perhaps, this is just a copy-paste mistake of commit 26d1e0c33098
("fconf: necessary modifications to support fconf in BL31 & SP_MIN").

Change-Id: I29f4c68680842c1b5ef913934b4ccf378e9bfcfb
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

plat: pass -D option to BL*_CPPFLAGS instead of BL*_CFLAGS ...

-D is a preprocessor flag that defines a macro. So, adding it to
BL*_CPPFLAGS makes more sense. You can reference it not only from
.c files but also from .S files.

Change-Id: Ib4f2f27a3ed3eae476a6a32da7ab5225ad0649de
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: introduce per-BL CPPFLAGS and ASFLAGS ...

Currently, BL*_CFLAGS and BL*_LDFLAGS are supported.

For completion, this adds BL*_CPPFLAGS and BL*_ASFLAGS.

My main motivation is to pass -D<macro> to BL*_CPPFLAGS so that
the macro can be used from all source files.

Change-Id: I0ca1e4e26386bef7fed999af140ee7cce7c2f8ef
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

xlat_tables_v2: add enable_mmu() ...

enable_mmu_* has a different function name, so it is not handy in the
shared code. enable_mmu() calls an appropriate one depending on the
exception level.

Change-Id: I0657968bfcb91c32733f75f9259f550a5c35b1c3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add get_current_el_maybe_constant() ...

There are some cases where we want to run EL-dependent code in the
shared code.

We could use #ifdef, but it leaves slight possibility where we do not
know the exception level at the build-time (e.g. library code).

The counter approach is to use get_current_el(), but it is run-time
detection, so all EL code is linked, some of which might be unneeded.

This commit adds get_current_el_maybe_constant(). This is a static
inline function that returns a constant value if we know the exception
level at build-time. This is mostly the case.

    if (get_current_el_maybe_constant() == 1) {
            /* do something for EL1 */
    } else if (get_current_el_maybe_constant() == 3) {
            /* do something for EL3 */
    }

If get_current_el_maybe_constant() is build-time constant, the compiler
will optimize out the unreachable code.

If such code is included from the library code, it is not built-time
constant. In this case, it falls back to get_current_el(), so it still
works.

Change-Id: Idb03c20342a5b5173fe2d6b40e1fac7998675ad3
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Build: define IMAGE_AT_EL1 or IMAGE_AT_EL3 globally for C files ...

The build system defines the IMAGE_BL* macro when compiling each image.
This is useful to distinguish which image the current file is being
built for by using #if defined(IMAGE_BL2) or #if defined(IMAGE_BL31),
or whatever.

There are some cases where we are more interested in which exception
level the current file is being built for.

include/lib/cpus/{aarch32,aarch64}/cpu_macros.S defines IMAGE_AT_EL3,
but we do not have it globally.

Pass IMAGE_AT_EL1 or IMAGE_AT_EL3 to BL*_CFLAGS so that it is available
from all C code.

The library code (libc.a, libmbedtls.a, etc.) is exceptional cases,
where the code can be shared between BL images.

Other than that, we know the exception level at the build time, and
this macro will be useful in the shared code.

Change-Id: I7c8a1da10726906adfba981cfe8464dff111d6b0
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge "plat/sgm775: Add support for dynamic config using fconf" into integration

plat/sgm775: Add support for dynamic config using fconf ...

1. Necessary changes to platform makefile to include fw_config
device tree and package it in fip.bin

2. Removed hw_config node from fw_config dts as there is no
HW_CONFIG device tree source for sgm775

3. Added mbedtls_heap related properties for TBBR functionality

Change-Id: I26b940c65b17ad2fb5537141f8649785bb0fd4ad
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Merge "Flush dcache when storing timestamp" into integration

Merge changes from topic "ddr_map" into integration ...

* changes:
  stm32mp1: use stm32mp_get_ddr_ns_size() function
  stm32mp1: set XN attribute for some areas in BL2
  stm32mp1: dynamically map DDR later and non-cacheable during its test
  stm32mp1: add a function to get non-secure DDR size

Create separate header for ARM specific SMCCC defines ...

Moved SMCCC defines from plat_arm.h to new <smccc_def.h> header
and include this header in all ARM platforms.

Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I4cbc69c7b9307461de87b7c7bf200dd9b810e485

TF-A GICv3 driver: Introduce makefile ...

This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.

NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.

Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Merge "plat/arm/sgi: fix the incorrect check for SCMI channel ID" into integration