2018-03-05 |
Merge pull request #1288 from michpappas/tf-issues#558_qemu_separate_code_and_data
...
qemu: Support SEPARATE_CODE_AND_RODATA
davidcunado-arm
authored
on 5 Mar 2018
GitHub
committed
on 5 Mar 2018
|
2018-03-04 |
qemu: Accessing UART1 causes a data abort
...
The register address range of UART1 (crash console) are outside the
address ranges mapped for MMIO, resulting to an MMU abort when the
device registers are accessed.
Increase the size of DEVICE1 memory to include the range of UART1.
Fixes ARM-software/tf-issues#560
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Michalis Pappas
committed
on 4 Mar 2018
|
2018-02-28 |
qemu: Support SEPARATE_CODE_AND_RODATA
...
Update qemu_configure_mmu_##_el to add an additional region for code,
marked as MT_CODE | MT_SECURE. Update ro region attributes to NON_EXEC.
Update calls to QEMU_CONFIGURE_BLx_MMU() to pass an additional region for
code. Update calls to pass regions defined in common_def.h.
Increase MAX_MMAP_REGIONS to 10.
Enable SEPARATE_CODE_AND_RODATA by default on QEMU builds.
Fixes ARM-software/tf-issues#558
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Michalis Pappas
committed
on 28 Feb 2018
|
2018-02-27 |
Update ULL() macro and instances of ull to comply with MISRA
...
MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes.
This patch resolves this for the ULL() macro by using ULL suffix instead
of the ull suffix.
Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01
Signed-off-by: David Cunado <david.cunado@arm.com>
David Cunado
committed
on 27 Feb 2018
|
2018-02-09 |
qemu: Fix interrupt type check
...
Function plat_ic_get_pending_interrupt_type() should return interrupt
type, not id. The function is used in aarch64 exception handling and
currently the irq/fiq forwarding fails if a secure interrupt happens while
running normal world.
The qemu-specific gic file does not contain any extra functionality so it
can be removed and common file can be used instead.
fixes arm-software/tf-issues#546
Signed-off-by: Santeri Salko <santeri.salko@gmail.com>
Santeri Salko
committed
on 9 Feb 2018
|
2018-02-06 |
Merge pull request #1173 from etienne-lms/armv7-qemu
...
support to boot OP-TEE on AArch32/Armv7+example with Cortex-A15/Qemu
davidcunado-arm
authored
on 6 Feb 2018
GitHub
committed
on 6 Feb 2018
|
2018-02-05 |
qemu: support ARMv7/Cortex-A15
...
Define Qemu AArch32 implementation for some platform functions
(core position, secondary boot cores, crash console). These are
derived from the AArch64 implementation.
BL31 on Qemu is needed only for ARMv8 and later. On ARMv7, BL32 is
the first executable image after BL2.
Support SP_MIN and OP-TEE as BL32: create a sp_min make script target
in Qemu, define mapping for IMAGE_BL32
Minor fix Qemu return value type for plat_get_ns_image_entrypoint().
Qemu model for the Cortex-A15 does not support the virtualization
extension although the core expects it. To overcome the issue, Qemu
ARMv7 configuration set ARCH_SUPPORTS_VIRTUALIZATION to 0.
Add missing AArch32 assembly macro arm_print_gic_regs from ARM platform
used by the Qemu platform.
Qemu Cortex-A15 model integrates a single cluster with up to 4 cores.
Change-Id: I65b44399071d6f5aa40d5183be11422b9ee9ca15
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere
committed
on 5 Feb 2018
|
2018-02-01 |
Build: change the first parameter of TOOL_ADD_IMG to lowercase
...
In the next commit, I need the image name in lowercase because
output files are generally named in lowercase.
Unfortunately, TOOL_ADD_IMG takes the first argument in uppercase
since we generally use uppercase Make variables.
make_helpers/build_macros.mk provides 'uppercase' macro to convert
a string into uppercase, but 'lowercase' does not exist. We can
implement it if we like, but it would be more straightforward to
change the argument of TOOL_ADD_IMG.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 1 Feb 2018
|
Build: rename FIP_ADD_IMG to TOOL_ADD_IMG
...
Now FIP_ADD_IMG takes care of both fiptool and cert_create
symmetrically. Rename it so that it matches the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 1 Feb 2018
|
2017-11-30 |
Do not enable SVE on pre-v8.2 platforms
...
Pre-v8.2 platforms such as the Juno platform does not have
the Scalable Vector Extensions implemented and so the build
option ENABLE_SVE is set to zero.
This has a minor performance improvement with no functional
impact.
Change-Id: Ib072735db7a0247406f8b60e325b7e28b1e04ad1
Signed-off-by: David Cunado <david.cunado@arm.com>
David Cunado
committed
on 30 Nov 2017
|
2017-11-03 |
Merge pull request #1142 from etienne-lms/qemu-int
...
qemu: update deprecated interrupt registering
davidcunado-arm
authored
on 3 Nov 2017
GitHub
committed
on 3 Nov 2017
|
2017-11-02 |
qemu: update deprecated interrupt registering
...
Registered interrupts are configured in edge detection as the default
previous configuration assumed in previous code.
Not target mask required as Qemu BL31 will not send/route SGIs.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere
committed
on 2 Nov 2017
|
2017-10-26 |
Merge pull request #1147 from etienne-lms/qemu-optee-load
...
qemu/optee: load OP-TEE pageable part 2MB above OP-TEE image
davidcunado-arm
authored
on 26 Oct 2017
GitHub
committed
on 26 Oct 2017
|
Merge pull request #1143 from etienne-lms/qemu-hpen
...
qemu: fix holding pen mailbox sequence
davidcunado-arm
authored
on 26 Oct 2017
GitHub
committed
on 26 Oct 2017
|
qemu/optee: load OP-TEE pageable part 2MB above OP-TEE image
...
OP-TEE dedicates the end of the Qemu secure DRAM as specific out-of-TEE
secure RAM. To support this configuration the trusted firmware should
not load OP-TEE resources in this area.
To overcome the issue, OP-TEE pageable image is now loaded 2MByte above
the secure RAM base address.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere
committed
on 26 Oct 2017
|
2017-10-24 |
qemu: Add support for Trusted Board Boot
...
This patch adds support for TBB to qemu. An RSA ROT keypair is generated at
build time and is included into BL1/BL2. The key and content certificates
are read over semihosting.
Fixes ARM-software/tf-issues#526
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Michalis Pappas
committed
on 24 Oct 2017
|
qemu: fix holding pen mailbox sequence
...
Before this change, plat_secondary_cold_boot_setup reads wake up mailbox
as a byte array but through 64bit accesses on unaligned 64bit addresses.
In the other hand qemu_pwr_domain_on wakes secondary cores by writing
into a 64bit array.
This change forces the 64bit mailbox format as PLAT_QEMU_HOLD_ENTRY_SIZE
explicitly specifies it.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere
committed
on 24 Oct 2017
|
2017-08-24 |
qemu: Add OP-TEE extra image parsing support
...
OP-TEE may have extra images to be loaded. Load them one by one and do
the parsing. In this patch, ARM TF need to load up to 3 images for
OP-TEE: header, pager and pages images. Header image is the info about
optee os and images. Pager image include pager code and data. Paged
image include the paging parts using virtual memory.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Jens Wiklander
committed
on 24 Aug 2017
|
qemu: replace deprecated plat_psci_common.c
...
Change to compile with new plat/common/plat_psci_common.c instead of the old
deprecated plat/common/aarch64/plat_psci_common.c
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Jens Wiklander
committed
on 24 Aug 2017
|
qemu: replace deprecated ADDR_SPACE_SIZE
...
Replaces the deprecated ADDR_SPACE_SIZE with PLAT_PHY_ADDR_SPACE_SIZE
and PLAT_VIRT_ADDR_SPACE_SIZE.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Jens Wiklander
committed
on 24 Aug 2017
|
2017-08-15 |
qemu: Add LOAD_IMAGE_V2 support
...
The generic LOAD_IMAGE_V2 framework has been merged and enable for almost
all the arm platform. Because qemu platform doesn't share those common
files with arm, QEMU haven't got this support yet.
This patch add all the necessary code the files for adding LOAD_IMAGE_V2
support on QEMU and enable it as default.
Fixes ARM-software/tf-issues#507
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Fu Wei
authored
on 27 May 2017
Fu Wei
committed
on 15 Aug 2017
|
2017-07-31 |
qemu: use translation tables library v2 as default.
...
Almost all the arm platform has switch to translation tables library v2 as
default. Because qemu platform doesn't use arm_common.mk like other arm
platforms, QEMU haven't switched to v2 yet.
This patch adds all the necessary code for adding translation tables
library v2 support on QEMU and use it as default.
Fixes ARM-software/tf-issues#508
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Fu Wei
committed
on 31 Jul 2017
|
2017-07-14 |
Fix order of remaining platform #includes
...
This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.
Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>
Isla Mitchell
committed
on 14 Jul 2017
|
2017-05-11 |
Merge pull request #927 from jeenu-arm/state-switch
...
Execution state switch
davidcunado-arm
authored
on 11 May 2017
GitHub
committed
on 11 May 2017
|
2017-05-03 |
Use SPDX license identifiers
...
To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.
NOTE: Files that have been imported by FreeBSD have not been modified.
[0]: https://spdx.org/
Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
dp-arm
committed
on 3 May 2017
|
2017-05-02 |
Add macro to check whether the CPU implements an EL
...
Replace all instances of checks with the new macro.
Change-Id: I0eec39b9376475a1a9707a3115de9d36f88f8a2a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Jeenu Viswambharan
committed
on 2 May 2017
|
2017-03-20 |
Move plat/common source file definitions to generic Makefiles
...
These source file definitions should be defined in generic
Makefiles so that all platforms can benefit. Ensure that the
symbols are properly marked as weak so they can be overridden
by platforms.
NOTE: This change is a potential compatibility break for
non-upstream platforms.
Change-Id: I7b892efa9f2d6d216931360dc6c436e1d10cffed
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
dp-arm
committed
on 20 Mar 2017
|
2017-02-06 |
Replace some memset call by zeromem
...
Replace all use of memset by zeromem when zeroing moderately-sized
structure by applying the following transformation:
memset(x, 0, sizeof(x)) => zeromem(x, sizeof(x))
As the Trusted Firmware is compiled with -ffreestanding, it forbids the
compiler from using __builtin_memset and forces it to generate calls to
the slow memset implementation. Zeromem is a near drop in replacement
for this use case, with a more efficient implementation on both AArch32
and AArch64.
Change-Id: Ia7f3a90e888b96d056881be09f0b4d65b41aa79e
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Douglas Raillard
committed
on 6 Feb 2017
|
2017-01-23 |
Use #ifdef for IMAGE_BL* instead of #if
...
One nasty part of ATF is some of boolean macros are always defined
as 1 or 0, and the rest of them are only defined under certain
conditions.
For the former group, "#if FOO" or "#if !FOO" must be used because
"#ifdef FOO" is always true. (Options passed by $(call add_define,)
are the cases.)
For the latter, "#ifdef FOO" or "#ifndef FOO" should be used because
checking the value of an undefined macro is strange.
Here, IMAGE_BL* is handled by make_helpers/build_macro.mk like
follows:
$(eval IMAGE := IMAGE_BL$(call uppercase,$(3)))
$(OBJ): $(2)
@echo " CC $$<"
$$(Q)$$(CC) $$(TF_CFLAGS) $$(CFLAGS) -D$(IMAGE) -c $$< -o $$@
This means, IMAGE_BL* is defined when building the corresponding
image, but *undefined* for the other images.
So, IMAGE_BL* belongs to the latter group where we should use #ifdef
or #ifndef.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 23 Jan 2017
|
2017-01-18 |
qemu: remove unused BL32_SIZE
...
I do not see any line that references BL32_SIZE.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada
committed
on 18 Jan 2017
|