LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

2018-03-05	19b731e Browse files » hikey960: fix invoking driver init in image load driver ... It's unnecessary to call platform driver initialization in image load driver. We could make bl2_platform_setup() to executing just before SCP_BL2 by setting flag IMAGE_ATTRIB_PLAT_SETUP. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	d212873 Browse files » hikey960: migrate to bl2_el3 ... Since non-TF ROM is used in HiKey960 platform (Hisilicon Hi3660 SoC), replace BL1 by BL2_EL3 in normal boot mode. When flush images in recovery mode, keep to use BL1. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	99ffcaf Browse files » hikey960: drop LOAD_IMAGE v1 ... Since LOAD_IMAGE_V2 is always enabled in HiKey960 platform. Drop LOAD_IMAGE v1 to simplify code. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	8495c03 Browse files » hikey960: fix memory overlapped in memory map ... MAP_TSP_MEM could be either in SRAM or DRAM. When MAP_TSP_MEM is in DRAM, it's overlapped with MAP_DDR. Since TSP_MEM is always configured in DRAM case, it means MAP_OPTEE_PAGEABLE is always disabled. Just remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	17cf8ab Browse files » hikey960: avoid to dump message when fetch boardid ... The main difference between HiKey960 v1 hardware and HiKey960 v2 hardware is on UART console. But the function of detecting boardid dumps message before console ready. So fix it by removing those messages. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
	054c3e0 Browse files » hikey: move out duplicated code ... Create hikey_bl_common.c to store duplicated initialization code in BL1 and BL2. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 5 Mar 2018
2018-03-04	a628b1a Browse files » hikey: migrate to bl2_el3 ... Since non-TF ROM is used in HiKey platform (Hisilicon Hi6220 SoC), replace BL1 by BL2_EL3 in normal boot mode. When we recovery images in recovery mode, keep to use BL1. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
	a9b3021 Browse files » hikey: clean dcache for SRAM after initialized ... Although SRAM is initialized, DCACHE should be cleaned too. Because MCU is a parrallel core to access SRAM. We need to make sure that initialized value is really written to SRAM before MCU using it. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
	103c213 Browse files » hikey: drop LOAD_IMAGE v1 ... Since LOAD_IMAGE_V2 is always enabled in HiKey platform. Drop LOAD_IMAGE v1 to simplify code. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 4 Mar 2018
2018-01-29	cde9f4f Browse files » hikey: fix memory overlapped in memory map ... MAP_TSP_MEM could be either in SRAM or DRAM. When MAP_TSP_MEM is in DRAM, it's overlapped with MAP_DDR. Since MAP_OPTEE_PAGEABLE isn't used in SRAM case, just remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 29 Jan 2018
	Unverified e47541a Browse files » Merge pull request #1237 from sandrine-bailleux-arm/sb/spm-timer ... SPM: Map devices in the 1st GB davidcunado-arm authored on 29 Jan 2018 GitHub committed on 29 Jan 2018
	Unverified aca8a49 Browse files » Merge pull request #1246 from sandrine-bailleux-arm/topics/sb/fix-cnp-doc ... Fix documentation for CnP bit davidcunado-arm authored on 29 Jan 2018 GitHub committed on 29 Jan 2018
	Unverified 380acca Browse files » Merge pull request #1243 from afaerber/hikey-docs ... docs: hikey: Fix typo davidcunado-arm authored on 29 Jan 2018 GitHub committed on 29 Jan 2018
	7c0a843 Browse files » Fix documentation for CnP bit ... The CnP bit documentation in the Firmware Design Guide incorrectly used the term "Page Entries" instead of "Processing Elements". Fix that. Change-Id: Ie44ee99c281b7b1a9ad90fba2c7d109f12425507 Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com> Sandrine Bailleux committed on 29 Jan 2018
	Unverified 1b56ed6 Browse files » Merge pull request #1241 from vchong/fixmemprot ... hikey: fix assert in sec_protect() davidcunado-arm authored on 29 Jan 2018 GitHub committed on 29 Jan 2018
	c4fa173 Browse files » SPM: Map devices in the 1st GB ... This patch maps the devices in the first GB of the system address map on the FVP into the S-EL1&0 translation regime when SPM support is enabled. This grants the Secure Partition access to the devices in this region, for example the memory-mapped Generic Timer device. Change-Id: I3aeea65f859ecbe83efde2acee20c55500c451bc Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com> Sandrine Bailleux committed on 29 Jan 2018
2018-01-28	1b9e79e Browse files » docs: hikey: Fix typo ... The correct name of the manufacturer is LeMaker. Signed-off-by: Andreas Färber <afaerber@suse.de> Andreas Färber committed on 28 Jan 2018
2018-01-27	d5d5595 Browse files » hikey: fix assert in sec_protect() ... `assert(e)` was used in place of `if (e) ERROR()` when sec_protect() was ported from hikey fork so the logic should have been reversed. Fixes: 3d5d9f5a ("hikey: configure the top 16MB of DRAM as secure") Fixes: 52988b38 ("hikey: configure 4 MB of secure DRAM for OP-TEE Secure Data Path") Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Victor Chong <victor.chong@linaro.org> Victor Chong committed on 27 Jan 2018
2018-01-26	Unverified 5df2778 Browse files » Merge pull request #1205 from petegriffin/hikey-protect-memory ... Hikey protect optee / sdp memory davidcunado-arm authored on 26 Jan 2018 GitHub committed on 26 Jan 2018
2018-01-25	Unverified f478253 Browse files » Merge pull request #1232 from masahir0y/uniphier ... uniphier: migrate to BL2-AT-EL3 davidcunado-arm authored on 25 Jan 2018 GitHub committed on 25 Jan 2018
2018-01-24	Unverified 73ba5d4 Browse files » Merge pull request #1234 from SNG-ARM/master ... SPM: Declare explicit width based types in secure_partition_boot_info… davidcunado-arm authored on 24 Jan 2018 GitHub committed on 24 Jan 2018
	Unverified 8253eb5 Browse files » Merge pull request #1231 from Leo-Yan/hikey960_enable_fiq_handling ... Hikey960: Enable invalid FIQ handling davidcunado-arm authored on 24 Jan 2018 GitHub committed on 24 Jan 2018
	Unverified d95eb47 Browse files » Merge pull request #1228 from dp-arm/dp/cve_2017_5715 ... Workarounds for CVE-2017-5715 on A9/A15 and A17 + serial console reporting davidcunado-arm authored on 24 Jan 2018 GitHub committed on 24 Jan 2018
	Unverified e5dbebf Browse files » Merge pull request #1223 from vchong/poplar_bl1loadsfip ... poplar: Enable emmc and recovery build support davidcunado-arm authored on 24 Jan 2018 GitHub committed on 24 Jan 2018
	Unverified 040f1e6 Browse files » Merge pull request #1193 from jwerner-chromium/JW_coreboot ... New console API and coreboot support [v4] davidcunado-arm authored on 24 Jan 2018 GitHub committed on 24 Jan 2018
	247fc04 Browse files » uniphier: switch to BL2-AT-EL3 and remove BL1 support ... UniPhier platform implements non-TF boot ROM. Prior to the BL2-AT-EL3 support, BL1 (worked as a pseudo ROM) was needed just for ensuring BL2 is entered at EL1-S. Now, this platform is able to avoid this waste. Enable the BL2_AT_EL3 option, and remove BL1. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Masahiro Yamada committed on 24 Jan 2018
	8e053dc Browse files » uniphier: set PROGRAMMABLE_RESET_ADDRESS to disable warm boot mailbox ... The warm boot mailbox code is compiled if PROGRAMMABLE_RESET_ADDRESS is disabled. The warm boot mailbox is useless for UniPhier SoC family because BL1 is not the first image. The UniPhier platform implements non-TF ROM, then BL1 works as a pseudo ROM, so it is never executed in the warm boot. The reset vector address is not actually programmable for UniPhier platform, but it should not hurt to enable PROGRAMMABLE_RESET_ADDRESS to disable the mailbox and remove pointless plat_get_my_entrypoint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Masahiro Yamada committed on 24 Jan 2018
	Unverified d218405 Browse files » Merge pull request #1233 from soby-mathew/sm/rm_uniphier_override ... Allow API deprecation for uniphier platform davidcunado-arm authored on 24 Jan 2018 GitHub committed on 24 Jan 2018
2018-01-23	52988b3 Browse files » hikey: configure 4 MB of secure DRAM for OP-TEE Secure Data Path ... Update the memory firewall configuration to reserve 4 MB of secure RAM for use by the kernel and OP-TEE as the Secure Data Path pool. Note that this address range (0x3E800000 - 0x3EC00000) falls in the range already set aside by UEFI (which reserves the upper 32 MB of the 1GB DRAM for OP-TEE [1]) and was previously unused. [1] https://github.com/96boards-hikey/edk2/blob/hikey/HisiPkg/HiKeyPkg/Library/HiKeyLib/HiKeyMem.c#L44 Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Victor Chong <victor.chong@linaro.org> Peter Griffin committed on 23 Jan 2018
2018-01-23	3d5d9f5 Browse files » hikey: configure the top 16MB of DRAM as secure ... DRAM region 0x3f000000 - 0x3fffffff is reserved for OP-TEE and should therefore be accessible only from secure world. Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Victor Chong <victor.chong@linaro.org> Jerome Forissier authored on 4 May 2015 Peter Griffin committed on 23 Jan 2018