2015-12-09 |
Merge pull request #461 from yatharth-arm/yk/nvidia_patch
...
Include psci.h from tegra platform header
danh-arm
committed
on 9 Dec 2015
|
Include psci.h from tegra platform header
...
The `plat/nvidia/tegra/include/tegra_private.h` file uses resources
from psci.h (for example, psci_power_state_t) but does not explicitly
include psci.h. This does not currently cause a problem since psci.h
is indirectly included via other headers. However, this may not be
the case in future.
This patch explicitly includes psci.h from tegra_private.h
Change-Id: Ia991147898dbd117c1d3496a95850995a5554c05
Yatharth Kochar
committed
on 9 Dec 2015
|
Merge pull request #460 from sandrine-bailleux/sb/init-vttbrel2-vmid
...
Initialize VTTBR_EL2 when bypassing EL2
danh-arm
committed
on 9 Dec 2015
|
Initialize VTTBR_EL2 when bypassing EL2
...
In the situation that EL1 is selected as the exception level for the
next image upon BL31 exit for a processor that supports EL2, the
context management code must configure all essential EL2 register
state to ensure correct execution of EL1.
VTTBR_EL2 should be part of this set of EL2 registers because:
- The ARMv8-A architecture does not define a reset value for this
register.
- Cache maintenance operations depend on VTTBR_EL2.VMID even when
non-secure EL1&0 stage 2 address translation are disabled.
This patch initializes the VTTBR_EL2 register to 0 when bypassing EL2
to address this issue. Note that this bug has not yet manifested
itself on FVP or Juno because VTTBR_EL2.VMID resets to 0 on the
Cortex-A53 and Cortex-A57.
Change-Id: I58ce2d16a71687126f437577a506d93cb5eecf33
Sandrine Bailleux
committed
on 9 Dec 2015
|
Merge pull request #458 from soby-mathew/sm/rem_tzc_base_assert
...
Remove the assert for TZC base during initialization
danh-arm
committed
on 9 Dec 2015
|
Merge pull request #457 from soby-mathew/sm/fix_fpregs_restore
...
Fix issue in Floating point register restore
danh-arm
committed
on 9 Dec 2015
|
Merge pull request #456 from soby-mathew/sm/gicv3-tsp-plat-changes-v2
...
Modify TSP and ARM standard platforms for new GIC drivers v2
danh-arm
committed
on 9 Dec 2015
|
Merge pull request #455 from jcastillo-arm/jc/fvp_delay_timer
...
Fix SP804 delay timer on FVP
danh-arm
committed
on 9 Dec 2015
|
Fix issue in Floating point register restore
...
The `fpregs_context_restore()` function used to restore the floating point
regsiter context had a typo error wherein it was doing `str` instead of
`ldr` for a register. This issue remained undetected becuase none of the ARM
Standard development platforms save and restore the floating point register
context when a context switch is done. This patch corrects the issue.
Change-Id: Id178e0ba254a5e0a4a844f54b39d71dc34e0f6ea
Soby Mathew
committed
on 9 Dec 2015
|
TSP: Allow preemption of synchronous S-EL1 interrupt handling
...
Earlier the TSP only ever expected to be preempted during Standard SMC
processing. If a S-EL1 interrupt triggered while in the normal world, it
will routed to S-EL1 `synchronously` for handling. The `synchronous` S-EL1
interrupt handler `tsp_sel1_intr_entry` used to panic if this S-EL1 interrupt
was preempted by another higher priority pending interrupt which should be
handled in EL3 e.g. Group0 interrupt in GICv3.
With this patch, the `tsp_sel1_intr_entry` now expects `TSP_PREEMPTED` as the
return code from the `tsp_common_int_handler` in addition to 0 (interrupt
successfully handled) and in both cases it issues an SMC with id
`TSP_HANDLED_S_EL1_INTR`. The TSPD switches the context and returns back
to normal world. In case a higher priority EL3 interrupt was pending, the
execution will be routed to EL3 where interrupt will be handled. On return
back to normal world, the pending S-EL1 interrupt which was preempted will
get routed to S-EL1 to be handled `synchronously` via `tsp_sel1_intr_entry`.
Change-Id: I2087c7fedb37746fbd9200cdda9b6dba93e16201
Soby Mathew
committed
on 9 Dec 2015
|
Enable support for EL3 interrupt in IMF
...
This patch enables support for EL3 interrupts in the Interrupt Management
Framework (IMF) of ARM Trusted Firmware. Please note that although the
registration of the EL3 interrupt type is now supported, it has not been
tested on any of the ARM Standard platforms.
Change-Id: If4dcdc7584621522a2f3ea13ea9b1ad0a76bb8a1
Soby Mathew
committed
on 9 Dec 2015
|
Rework use of ARM GIC drivers on ARM platforms
...
Suport for ARM GIC v2.0 and v3.0 drivers has been reworked to create three
separate drivers instead of providing a single driver that can work on both
versions of the GIC architecture. These drivers correspond to the following
software use cases:
1. A GICv2 only driver that can run only on ARM GIC v2.0 implementations
e.g. GIC-400
2. A GICv3 only driver that can run only on ARM GIC v3.0 implementations
e.g. GIC-500 in a mode where all interrupt regimes use GICv3 features
3. A deprecated GICv3 driver that operates in legacy mode. This driver can
operate only in the GICv2 mode in the secure world. On a GICv3 system, this
driver allows normal world to run in either GICv3 mode (asymmetric mode)
or in the GICv2 mode. Both modes of operation are deprecated on GICv3
systems.
ARM platforms implement both versions of the GIC architecture. This patch adds a
layer of abstraction to help ARM platform ports chose the right GIC driver and
corresponding platform support. This is as described below:
1. A set of ARM common functions have been introduced to initialise the GIC and
the driver during cold and warm boot. These functions are prefixed as
"plat_arm_gic_". Weak definitions of these functions have been provided for
each type of driver.
2. Each platform includes the sources that implement the right functions
directly into the its makefile. The FVP can be instantiated with different
versions of the GIC architecture. It uses the FVP_USE_GIC_DRIVER build option
to specify which of the three drivers should be included in the build.
3. A list of secure interrupts has to be provided to initialise each of the
three GIC drivers. For GIC v3.0 the interrupt ids have to be further
categorised as Group 0 and Group 1 Secure interrupts. For GIC v2.0, the two
types are merged and treated as Group 0 interrupts.
The two lists of interrupts are exported from the platform_def.h. The lists
are constructed by adding a list of board specific interrupt ids to a list of
ids common to all ARM platforms and Compute sub-systems.
This patch also makes some fields of `arm_config` data structure in FVP redundant
and these unused fields are removed.
Change-Id: Ibc8c087be7a8a6b041b78c2c3bd0c648cd2035d8
Achin Gupta
authored
on 3 Nov 2015
Soby Mathew
committed
on 9 Dec 2015
|
Prepare platforms to use refactored ARM GIC drivers
...
This patch adds platform helpers for the new GICv2 and GICv3 drivers in
plat_gicv2.c and plat_gicv3.c. The platforms can include the appropriate
file in their build according to the GIC driver to be used. The existing
plat_gic.c is only meant for the legacy GIC driver.
In the case of ARM platforms, the major changes are as follows:
1. The crash reporting helper macro `arm_print_gic_regs` that prints the GIC CPU
interface register values has been modified to detect the type of CPU
interface being used (System register or memory mappped interface) before
using the right interface to print the registers.
2. The power management helper function that is called after a core is powered
up has been further refactored. This is to highlight that the per-cpu
distributor interface should be initialised only when the core was originally
powered down using the CPU_OFF PSCI API and not when the CPU_SUSPEND PSCI API
was used.
3. In the case of CSS platforms, the system power domain restore helper
`arm_system_pwr_domain_resume()` is now only invoked in the `suspend_finish`
handler as the system power domain is always expected to be initialized when
the `on_finish` handler is invoked.
Change-Id: I7fc27d61fc6c2a60cea2436b676c5737d0257df6
Soby Mathew
committed
on 9 Dec 2015
|
2015-12-08 |
Merge pull request #454 from yatharth-arm/vk/deprecate-cci-400
...
Add CCI-400 specific driver to deprecated driver list
danh-arm
committed
on 8 Dec 2015
|
Add CCI-400 specific driver to deprecated driver list
...
Add compile time `__warn_deprecated` flag to public api's in CCI-400
specific driver so that user is aware of the driver being deprecated.
Similarly, it also adds an error message when `ERROR_DEPRECATED` is set
to prevent succesful compilation if CCI-400 specific driver is used.
Change-Id: Id7e61a560262abc01cbbd432ca85b9bf448a194d
Vikram Kanigiri
authored
on 3 Dec 2015
Yatharth Kochar
committed
on 8 Dec 2015
|
Remove the assert for TZC base during initialization
...
When resuming from system suspend the TZC needs to be
re-initialized. Hence the assertion for TZC base address
to detect re-initialization is removed.
Change-Id: I53d64146f6c919e95526441bb997f7b309c68141
Soby Mathew
committed
on 8 Dec 2015
|
Merge pull request #452 from vwadekar/tegra-new-platform-apis-v2
...
Tegra new platform apis v2
danh-arm
committed
on 8 Dec 2015
|
2015-12-04 |
Tegra: remove support for legacy platform APIs
...
This patch modifies the Tegra port to support the new platform
APIs so that we can disable the compat layer. This includes
modifications to the power management and platform topology code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Varun Wadekar
committed
on 4 Dec 2015
|
Enable use of FIQs and IRQs as TSP interrupts
...
On a GICv2 system, interrupts that should be handled in the secure world are
typically signalled as FIQs. On a GICv3 system, these interrupts are signalled
as IRQs instead. The mechanism for handling both types of interrupts is the same
in both cases. This patch enables the TSP to run on a GICv3 system by:
1. adding support for handling IRQs in the exception handling code.
2. removing use of "fiq" in the names of data structures, macros and functions.
The build option TSPD_ROUTE_IRQ_TO_EL3 is deprecated and is replaced with a
new build flag TSP_NS_INTR_ASYNC_PREEMPT. For compatibility reasons, if the
former build flag is defined, it will be used to define the value for the
new build flag. The documentation is also updated accordingly.
Change-Id: I1807d371f41c3656322dd259340a57649833065e
Soby Mathew
committed
on 4 Dec 2015
|
Unify interrupt return paths from TSP into the TSPD
...
The TSP is expected to pass control back to EL3 if it gets preempted due to
an interrupt while handling a Standard SMC in the following scenarios:
1. An FIQ preempts Standard SMC execution and that FIQ is not a TSP Secure
timer interrupt or is preempted by a higher priority interrupt by the time
the TSP acknowledges it. In this case, the TSP issues an SMC with the ID
as `TSP_EL3_FIQ`. Currently this case is never expected to happen as only
the TSP Secure Timer is expected to generate FIQ.
2. An IRQ preempts Standard SMC execution and in this case the TSP issues
an SMC with the ID as `TSP_PREEMPTED`.
In both the cases, the TSPD hands control back to the normal world and returns
returns an error code to the normal world to indicate that the standard SMC it
had issued has been preempted but not completed.
This patch unifies the handling of these two cases in the TSPD and ensures that
the TSP only uses TSP_PREEMPTED instead of separate SMC IDs. Also instead of 2
separate error codes, SMC_PREEMPTED and TSP_EL3_FIQ, only SMC_PREEMPTED is
returned as error code back to the normal world.
Background information: On a GICv3 system, when the secure world has affinity
routing enabled, in 2. an FIQ will preempt TSP execution instead of an IRQ. The
FIQ could be a result of a Group 0 or a Group 1 NS interrupt. In both case, the
TSPD passes control back to the normal world upon receipt of the TSP_PREEMPTED
SMC. A Group 0 interrupt will immediately preempt execution to EL3 where it
will be handled. This allows for unified interrupt handling in TSP for both
GICv3 and GICv2 systems.
Change-Id: I9895344db74b188021e3f6a694701ad272fb40d4
Soby Mathew
committed
on 4 Dec 2015
|
Rename GICv3 interrupt group macros
...
This patch renames the GICv3 interrupt group macros from
INT_TYPE_G0, INT_TYPE_G1S and INT_TYPE_G1NS to INTR_GROUP0,
INTR_GROUP1S and INTR_GROUP1NS respectively.
Change-Id: I40c66f589ce6234fa42205adcd91f7d6ad8f33d4
Soby Mathew
committed
on 4 Dec 2015
|
Fix SP804 delay timer on FVP
...
This patch fixes several issues with the SP804 delay timer on FVP:
* By default, the SP804 dual timer on FVP runs at 32 KHz. In order
to run the timer at 35 MHz (as specified in the FVP user manual)
the Overwrite bit in the SP810 control register must be set.
* The CLKMULT and CLKDIV definitions are mixed up:
delta(us) = delta(ticks) * T(us) = delta(ticks) / f(MHz)
From the delay function:
delta_us = (delta * ops->clk_mult) / ops->clk_div;
Matching both expressions:
1 / f(MHz) = ops->clk_mult / ops->clk_div
And consequently:
f(MHz) = ops->clk_div / ops->clk_mult
Which, for a 35 MHz timer, translates to:
ops->clk_div = 35
ops->clk_mult = 1
* The comment in the delay timer header file has been corrected:
The ratio of the multiplier and the divider is the clock period
in microseconds, not the frequency.
Change-Id: Iffd5ce0a5a28fa47c0720c0336d81b678ff8fdf1
Juan Castillo
committed
on 4 Dec 2015
|
2015-12-02 |
Merge pull request #446 from vikramkanigiri/vk/tzc-400
...
Fix TZC-400 peripheral detection
danh-arm
committed
on 2 Dec 2015
|
Merge pull request #449 from jcastillo-arm/jc/tbb_oid
...
TBB: add ARM OIDs
danh-arm
committed
on 2 Dec 2015
|
Merge pull request #444 from jcastillo-arm/jc/tbb_wdog
...
Jc/tbb wdog
danh-arm
committed
on 2 Dec 2015
|
TBB: add Trusted Watchdog support on ARM platforms
...
This patch adds watchdog support on ARM platforms (FVP and Juno).
A secure instance of SP805 is used as Trusted Watchdog. It is
entirely managed in BL1, being enabled in the early platform setup
hook and disabled in the exit hook. By default, the watchdog is
enabled in every build (even when TBB is disabled).
A new ARM platform specific build option `ARM_DISABLE_TRUSTED_WDOG`
has been introduced to allow the user to disable the watchdog at
build time. This feature may be used for testing or debugging
purposes.
Specific error handlers for Juno and FVP are also provided in this
patch. These handlers will be called after an image load or
authentication error. On FVP, the Table of Contents (ToC) in the FIP
is erased. On Juno, the corresponding error code is stored in the
V2M Non-Volatile flags register. In both cases, the CPU spins until
a watchdog reset is generated after 256 seconds (as specified in
the TBBR document).
Change-Id: I9ca11dcb0fe15af5dbc5407ab3cf05add962f4b4
Juan Castillo
committed
on 2 Dec 2015
|
TBB: add ARM OIDs
...
This patch adds ARM specific OIDs which will be used to extract
the extension data from the certificates. These OIDs are arranged
as a subtree whose root node has been specifically allocated for
ARM Ltd.
{ iso(1) identified-organization(3) dod(6) internet(1)
private(4) enterprise(1) 4128 }
Change-Id: Ice20b3c8a31ddefe9102f3bd42f7429986f3ac34
Juan Castillo
committed
on 2 Dec 2015
|
2015-12-01 |
Merge pull request #443 from achingupta/sb/el3_payloads-cb_single_cpu
...
Add support to boot EL3 payloads and only a single CPU at cold reset
danh-arm
committed
on 1 Dec 2015
|
Merge pull request #445 from jcastillo-arm/jc/tf-issues/320
...
Add NULL pointer check before reading BL32 entry point information
danh-arm
committed
on 1 Dec 2015
|
Merge pull request #442 from soby-mathew/sm/remove_imf_read_intid
...
Remove the IMF_READ_INTERRUPT_ID build option
danh-arm
committed
on 1 Dec 2015
|