2014-05-08 |
Merge pull request #65 from vikramkanigiri/vk/console_init
...
Ensure a console is initialized before it is used
danh-arm
committed
on 8 May 2014
|
Ensure a console is initialized before it is used
...
This patch moves console_init() to bl32_early_platform_setup(). It
also ensures that console_init() is called in each
blX_early_platform_setup() function before the console is used
e.g. through a printf call in an assert() statement.
Fixes ARM-software/TF-issues#127
Change-Id: I5b1f17e0152bab674d807d2a95ff3689c5d4794e
Vikram Kanigiri
committed
on 8 May 2014
|
Merge pull request #61 from athoelke/use-mrs-msr-from-assembler-v2
...
Use MRS/MSR instructions in assembler code v2
danh-arm
committed
on 8 May 2014
|
Merge pull request #60 from athoelke/disable-mmu-v2
...
Replace disable_mmu with assembler version v2
danh-arm
committed
on 8 May 2014
|
Merge pull request #59 from athoelke/review-barriers-v2
...
Correct usage of data and instruction barriers v2
danh-arm
committed
on 8 May 2014
|
Remove unused 'PL011_BASE' macro
...
'PL011_BASE' macro is no longer used because the right UART base
address is now directly given to the 'console_init()' function.
This patch removes it.
Change-Id: I94759c99602df4876291a56f9f6a75de337a65ec
Sandrine Bailleux
committed
on 8 May 2014
|
2014-05-07 |
Access system registers directly in assembler
...
Instead of using the system register helper functions to read
or write system registers, assembler coded functions should
use MRS/MSR instructions. This results in faster and more
compact code.
This change replaces all usage of the helper functions with
direct register accesses.
Change-Id: I791d5f11f257010bb3e6a72c6c5ab8779f1982b3
Andrew Thoelke
committed
on 7 May 2014
|
Replace disable_mmu with assembler version
...
disable_mmu() cannot work as a C function as there is no control
over data accesses generated by the compiler between disabling and
cleaning the data cache. This results in reading stale data from
main memory.
As assembler version is provided for EL3, and a variant that also
disables the instruction cache which is now used by the BL1
exception handling function.
Fixes ARM-software/tf-issues#147
Change-Id: I0cf394d2579a125a23c2f2989c2e92ace6ddb1a6
Andrew Thoelke
committed
on 7 May 2014
|
Correct usage of data and instruction barriers
...
The current code does not always use data and instruction
barriers as required by the architecture and frequently uses
barriers excessively due to their inclusion in all of the
write_*() helper functions.
Barriers should be used explicitly in assembler or C code
when modifying processor state that requires the barriers in
order to enable review of correctness of the code.
This patch removes the barriers from the helper functions and
introduces them as necessary elsewhere in the code.
PORTING NOTE: check any port of Trusted Firmware for use of
system register helper functions for reliance on the previous
barrier behaviour and add explicit barriers as necessary.
Fixes ARM-software/tf-issues#92
Change-Id: Ie63e187404ff10e0bdcb39292dd9066cb84c53bf
Andrew Thoelke
committed
on 7 May 2014
|
2014-05-06 |
Remove variables from .data section
...
Update code base to remove variables from the .data section,
mainly by using const static data where possible and adding
the const specifier as required. Most changes are to the IO
subsystem, including the framework APIs. The FVP power
management code is also affected.
Delay initialization of the global static variable,
next_image_type in bl31_main.c, until it is realy needed.
Doing this moves the variable from the .data to the .bss
section.
Also review the IO interface for inconsistencies, using
uintptr_t where possible instead of void *. Remove the
io_handle and io_dev_handle typedefs, which were
unnecessary, replacing instances with uintptr_t.
Fixes ARM-software/tf-issues#107.
Change-Id: I085a62197c82410b566e4698e5590063563ed304
Dan Handley
committed
on 6 May 2014
|
Reduce deep nesting of header files
...
Reduce the number of header files included from other header
files as much as possible without splitting the files. Use forward
declarations where possible. This allows removal of some unnecessary
"#ifndef __ASSEMBLY__" statements.
Also, review the .c and .S files for which header files really need
including and reorder the #include statements alphabetically.
Fixes ARM-software/tf-issues#31
Change-Id: Iec92fb976334c77453e010b60bcf56f3be72bd3e
Dan Handley
committed
on 6 May 2014
|
Always use named structs in header files
...
Add tag names to all unnamed structs in header files. This
allows forward declaration of structs, which is necessary to
reduce header file nesting (to be implemented in a subsequent
commit).
Also change the typedef names across the codebase to use the _t
suffix to be more conformant with the Linux coding style. The
coding style actually prefers us not to use typedefs at all but
this is considered a step too far for Trusted Firmware.
Also change the IO framework structs defintions to use typedef'd
structs to be consistent with the rest of the codebase.
Change-Id: I722b2c86fc0d92e4da3b15e5cab20373dd26786f
Dan Handley
committed
on 6 May 2014
|
Refactor GIC header files
...
Move the function prototypes from gic.h into either gic_v2.h or
gic_v3.h as appropriate. Update the source files to include the
correct headers.
Change-Id: I368cfda175cdcbd3a68f46e2332738ec49048e19
Dan Handley
committed
on 6 May 2014
|
Remove vpath usage in makefiles
...
Remove all usage of the vpath keyword in makefiles as it was prone
to mistakes. Specify the relative paths to source files instead.
Also reorder source files in makefiles alphabetically.
Fixes ARM-software/tf-issues#121
Change-Id: Id15f60655444bae60e0e2165259efac71a50928b
Dan Handley
committed
on 6 May 2014
|
Make use of user/system includes more consistent
...
Make codebase consistent in its use of #include "" syntax for
user includes and #include <> syntax for system includes.
Fixes ARM-software/tf-issues#65
Change-Id: If2f7c4885173b1fd05ac2cde5f1c8a07000c7a33
Dan Handley
committed
on 6 May 2014
|
Move FVP power driver to FVP platform
...
Move the FVP power driver to a directory under the FVP platform
port as this is not a generically usable driver.
Change-Id: Ibc78bd88752eb3e3964336741488349ac345f4f0
Dan Handley
committed
on 6 May 2014
|
Move include and source files to logical locations
...
Move almost all system include files to a logical sub-directory
under ./include. The only remaining system include directories
not under ./include are specific to the platform. Move the
corresponding source files to match the include directory
structure.
Also remove pm.h as it is no longer used.
Change-Id: Ie5ea6368ec5fad459f3e8a802ad129135527f0b3
Dan Handley
committed
on 6 May 2014
|
2014-04-24 |
Enable secure memory support for FVPs
...
- Use the TrustZone controller on Base FVP to program DRAM access
permissions. By default no access to DRAM is allowed if
'secure memory' is enabled on the Base FVP.
- The Foundation FVP does not have a TrustZone controller but instead
has fixed access permissions.
- Update FDTs for Linux to use timers at the correct security level.
- Starting the FVPs with 'secure memory' disabled is also supported.
Limitations:
Virtio currently uses a reserved NSAID. This will be corrected in
future FVP releases.
Change-Id: I0b6c003a7b5982267815f62bcf6eb82aa4c50a31
Harry Liebel
committed
on 24 Apr 2014
|
2014-04-22 |
Merge pull request #43 from danh-arm/dh/tf-issues#129
...
Move console.c to pl011 specific driver location
danh-arm
committed
on 22 Apr 2014
|
Merge pull request #44 from danh-arm/dh/tf-issues#136
...
Remove redundant code from bl1_plat_helpers.S
danh-arm
committed
on 22 Apr 2014
|
2014-04-16 |
Merge pull request #45 from danh-arm/dh/tf-issues#114
...
Rename FVP "mmap" array to avoid name confusion
danh-arm
committed
on 16 Apr 2014
|
Remove redundant code from bl1_plat_helpers.S
...
Remove redundant code in plat_secondary_cold_boot_setup() in
plat/fvp/aarch64/bl1_plat_helpers.S.
Fixes ARM-software/tf-issues#136
Change-Id: I98c0a46d95cfea33125e34e609c83dc2c97cd86e
Dan Handley
committed
on 16 Apr 2014
|
2014-04-15 |
Allocate single stacks for BL1 and BL2
...
The BL images share common stack management code which provides
one coherent and one cacheable stack for every CPU. BL1 and BL2
just execute on the primary CPU during boot and do not require
the additional CPU stacks. This patch provides separate stack
support code for UP and MP images, substantially reducing the
RAM usage for BL1 and BL2 for the FVP platform.
This patch also provides macros for declaring stacks and
calculating stack base addresses to improve consistency where
this has to be done in the firmware.
The stack allocation source files are now included via
platform.mk rather than the common BLx makefiles. This allows
each platform to select the appropriate MP/UP stack support
for each BL image.
Each platform makefile must be updated when including this
commit.
Fixes ARM-software/tf-issues#76
Change-Id: Ia251f61b8148ffa73eae3f3711f57b1ffebfa632
Andrew Thoelke
committed
on 15 Apr 2014
|
Rename FVP "mmap" array to avoid name confusion
...
Rename the array "mmap" in plat/fvp/aarch64/plat_common.c to
"fvp_mmap", to avoid confusion with the array of the same name
in lib/arch/aarch64/xlat_tables.c
Fixes ARM-software/tf-issues#114
Change-Id: I61478c0070aa52d5dcf5d85af2f353f56c060cfb
Dan Handley
committed
on 15 Apr 2014
|
Merge pull request #36 from athoelke/at/gc-sections-80
...
Using GCC --gc-sections to eliminate unused code and data
danh-arm
committed
on 15 Apr 2014
|
2014-04-14 |
Move console.c to pl011 specific driver location
...
Rename drivers/console/console.c to
drivers/arm/peripherals/pl011/pl011_console.c. This makes it clear
that this is a pl011 specific console implementation.
Fixes ARM-software/tf-issues#129
Change-Id: Ie2f8109602134c5b86993e32452c70734c45a3ed
Dan Handley
committed
on 14 Apr 2014
|
2014-04-08 |
Define frequency of system counter in platform code
...
BL3-1 architecture setup code programs the system counter frequency
into the CNTFRQ_EL0 register. This frequency is defined by the
platform, though. This patch introduces a new platform hook that
the architecture setup code can call to retrieve this information.
In the ARM FVP port, this returns the first entry of the frequency
modes table from the memory mapped generic timer.
All system counter setup code has been removed from BL1 as some
platforms may not have initialized the system counters at this stage.
The platform specific settings done exclusively in BL1 have been moved
to BL3-1. In the ARM FVP port, this consists in enabling and
initializing the System level generic timer. Also, the frequency change
request in the counter control register has been set to 0 to make it
explicit it's using the base frequency. The CNTCR_FCREQ() macro has been
fixed in this context to give an entry number rather than a bitmask.
In future, when support for firmware update is implemented, there
is a case where BL1 platform specific code will need to program
the counter frequency. This should be implemented at that time.
This patch also updates the relevant documentation.
It properly fixes ARM-software/tf-issues#24
Change-Id: If95639b279f75d66ac0576c48a6614b5ccb0e84b
Sandrine Bailleux
committed
on 8 Apr 2014
|
Revert "Move architecture timer setup to platform-specific code"
...
This reverts commit 1c297bf
because it introduced a bug: the CNTFRQ_EL0 register was no
longer programmed by all CPUs. bl31_platform_setup() function
is invoked only in the cold boot path and consequently only
on the primary cpu.
A subsequent commit will correctly implement the necessary changes
to the counter frequency setup code.
Fixes ARM-software/tf-issues#125
Conflicts:
docs/firmware-design.md
plat/fvp/bl31_plat_setup.c
Change-Id: Ib584ad7ed069707ac04cf86717f836136ad3ab54
Sandrine Bailleux
committed
on 8 Apr 2014
|
2014-03-26 |
Place assembler functions in separate sections
...
This extends the --gc-sections behaviour to the many assembler
support functions in the firmware images by placing each function
into its own code section. This is achieved by creating a 'func'
macro used to declare each function label.
Fixes ARM-software/tf-issues#80
Change-Id: I301937b630add292d2dec6d2561a7fcfa6fec690
Andrew Thoelke
committed
on 26 Mar 2014
|
Initialise UART console in all bootloader stages
...
This patch reworks the console driver to ensure that each bootloader stage
initializes it independently. As a result, both BL3-1 and BL2 platform code
now calls console_init() instead of relying on BL1 to perform console setup
Fixes ARM-software/tf-issues#120
Change-Id: Ic4d66e0375e40a2fc7434afcabc8bbb4715c14ab
Vikram Kanigiri
authored
on 25 Mar 2014
Dan Handley
committed
on 26 Mar 2014
|