LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

2014-03-12	4d5a115 Browse files » io_fip: add BL30 to FIP name to uuid table ... BL30 needs an entry in the table in io_fip.c. I made it #ifdef'd so that ports that don't use a BL30 won't break. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Ryan Harkin authored on 19 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	ff956f1 Browse files » juno: plat_io_storage: remove semihosting ... Removing semihosting from the plat_io_storage code copied from FVP. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Ryan Harkin authored on 18 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	0617670 Browse files » juno: BL1: default to building bypass rom ... Juno has a "taped out" BL1. To run your own BL1 on the board, you have to place it in a "ROM bypass" address and configure the platform to boot from there. The agreed bypass address is an offset of 0x03EC0000 from the start of NOR flash (0x08000000), which equates to 0x0BEC0000. To run the model using a BL1 in bypass mode, you should use a parameter set something like this: <path to>/FVP_CSS_Juno3 \ -C css.aon.scp.ROMloader.fname=<SCP ROM filename> \ --data css.cluster1.cpu0=bl1.bin@0x0BEC0000 \ -C soc.scc.apps_alt_boot=0x0BEC0000 To build BL1 as a ROM located at address zero, you can over-ride the default value for TZROM_BASE by passing parameters to make, eg: ASFLAGS="-D TZROM_BASE=0x00000000" \ CFLAGS="-D TZROM_BASE=0x00000000" \ CROSS_COMPILE=aarch64-linux-gnu- \ make PLAT=juno DEBUG=1 all Then you can launch the model using a command such as: <path to>/FVP_CSS_Juno3 \ -C css.aon.scp.ROMloader.fname=<SCP ROM filename> \ -C css.trustedBootROMloader.fname=<path to>/bl1.bin \ Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Ryan Harkin authored on 3 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	7f6dba1 Browse files » juno: Add a handler for 'ARM Architecture' SMC calls ... Currently UEFI and Linux are using SMC calls in the 'ARM Architecture' Owning Entity range so lets implement these to get things working. UEFI probably doesn't actually need to issue the ID_PRESENCE and ID_UID calls it does, and the device-tree used by Linux could specify the PSCI identifiers instead. After those changes, this patch isn't required. Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 19 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	e7aa4a6 Browse files » Workaround: Setup register context for BL3-3 ... This is a temporary solution for issue #20 Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 19 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	a0d586e Browse files » juno: Implement PM ops to power down CPUs ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 11 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	7441ac3 Browse files » juno: Implement PM ops to power on CPUs ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 6 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	dbf5789 Browse files » juno: Implement SCPI Set CSS Power State command ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 11 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	0aadcc0 Browse files » juno: Add bootloader for SCP image ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 9 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	2e45bfd Browse files » juno: Add SCPI interface and implement the SCP Ready command ... The SCP Ready command is sent by the SCP to indicate that the BL3-0 RAM Firmware image is successfully up and running. Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 10 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	4d65df5 Browse files » juno: Add MHU interface ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 9 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	1202672 Browse files » juno: Initialise PCIe ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 4 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	06f1af9 Browse files » juno: Initialise TZC-400 ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 25 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	0be17c4 Browse files » juno: Initialise NIC-400 ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 27 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	29dfa23 Browse files » juno: Initialise GIC ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 27 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	39fa81b Browse files » juno: Port plat_topology.c ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 23 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	1100a4f Browse files » juno: Update GIC addresses ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 23 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	f5a885f Browse files » juno: Port mailbox initialisation ... Note, on Juno mailboxes are 16 bytes because any bigger and they would overlap the memory used for MHU payload data for SCP->AP transfers. Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 20 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	c478ff5 Browse files » juno: Port CCI ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 20 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	4c47d98 Browse files » juno: Override platform_get_core_pos and platform_is_primary_cpu ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 13 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	c30556a Browse files » juno: Update memory map and use generic MMU code ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 15 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
	8f23fbc Browse files » juno: Various tidyups Sandrine Bailleux committed on 12 Mar 2014
	b34ce28 Browse files » juno: Improve compliance to Linux coding style Sandrine Bailleux committed on 12 Mar 2014
	a40fc37 Browse files » juno: Use the correct firmware image names in comments and messages Sandrine Bailleux committed on 12 Mar 2014
	241a8bb Browse files » juno: Use static declaration of bl31_args ... Juno doesn't have TZDRAM as FVP does, and there is real reason why we need a special memory region for bl31_args anyway, assuming we take care to copy it in BL31 before BL2's memory is reused. Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 24 Feb 2014 Sandrine Bailleux committed on 12 Mar 2014
	3056803 Browse files » juno: Initialise architected timer in BL3-1 Jon Medhurst authored on 10 Mar 2014 Sandrine Bailleux committed on 12 Mar 2014
	b862951 Browse files » juno: Create as a trimmed copy of plat/fvp ... Signed-off-by: Jon Medhurst <tixy@linaro.org> Jon Medhurst authored on 13 Jan 2014 Sandrine Bailleux committed on 12 Mar 2014
2014-03-10	1c297bf Browse files » Move architecture timer setup to platform-specific code ... At present, bl1_arch_setup() and bl31_arch_setup() program the counter frequency using a value from the memory mapped generic timer. The generic timer however is not necessarily present on all ARM systems (although it is architected to be present on all server systems). This patch moves the timer setup to platform-specific code and updates the relevant documentation. Also, CNTR.FCREQ is set as the specification requires the bit corresponding to the counter's frequency to be set when enabling. Since we intend to use the base frequency, set bit 8. Fixes ARM-software/tf-issues#24 Change-Id: I32c52cf882253e01f49056f47c58c23e6f422652 Jeenu Viswambharan authored on 7 Jan 2014 Dan Handley committed on 10 Mar 2014
2014-03-10	92a1286 Browse files » Remove unused 'CPU present' flag ... This patch removes the 'CPU present' flag that's being set but not referred or used anywhere else. Change-Id: Iaf82bdb354134e0b33af16c7ba88eb2259b2682a Jeenu Viswambharan authored on 7 Jan 2014 Dan Handley committed on 10 Mar 2014
2014-03-05	5cfa93d Browse files » Remove change log instructions from contribution.md ... Remove the instructions to update the change log from contribution.md. The change log no longer contains a "Detailed changes since last release" section. Also, update the documentation links following recent documentation changes. Change-Id: Id9df43d666f7f9a60dcc6f663a8a85cdd2ff7cc4 Dan Handley committed on 5 Mar 2014