xilinx: common: Move ATF handover to common file ...

ATF handover can be used by Xilinx platforms, so move it to common
file from platform specific files.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5f0839351f534619de581d1953c8427a079487e0

plat: xilinx: Move pm_client.h to common directory ...

Move pm_client.h to common directory to avoid duplication
of function declaration.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iea542e681f42db089cccd9b24d286ac8f0a2ce35

xilinx: move ipi mailbox svc to xilinx common ...

As IPI mailbox service is common to both ZynqMP and Versal,
move it to xilinx/common.

Signed-off-by: Wendy Liang <wendy.liang@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I1a7008ccf7930829621147922d2c6d8d46df5502

plat: xilinx: zynqmp: Use GIC framework for warm restart ...

- Flag GICV2_G0_FOR_EL3 needs to be set for group interrupts
  to be targeted to EL3.
- Raise SGI interrupts for individual CPU cores as GIC API
  uses CPU num as parameter, not CPU mask.
- Flag WARMBOOT_ENABLE_DCACHE_EARLY needs to be set to enable
  CPU interface mask work properly for all CPU cores which is
  required when generating SGI.
- Call plat_ic_end_of_interrupt() from ttc_fiq_handler() to clear
  GIC interrupt to avoid same interrupt again.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I71d4935b8d4688a3729c62753ca8a1a77cd92ae7

plat: xilinx: zynqmp: Add checksum support for IPI data ...

This patch adds support for CRC checksum for IPI data when the
macro ZYNQMP_IPI_CRC_CHECK is defined.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic981f162666b3c1fffeb1b9fef3ee7714ecd889d

zynqmp: pm_service: Add support to query max divisor ...

Add new QID to get maximum supported divisor by clock.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I35fc92457e522f3f0614d983c21e55c2b0b8e80a

zynqmp: pm: Add CLK_SET_RATE_PARENT in gem clock node ...

Existing implementation does not allow to change the value of the
DIV1 because DIV2 does not have SET_RATE_PARENT flag.
This causes DIV1 value to be fixed and only value of DIV2 will be
adjusted according to required clock rate.

Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ic6c4ca091bf0c5dc91ebddf86621c82c705dc87b

zynqmp: pm: clock: Move custom flags to typeflags ...

Linux expects custom flags in type flags. So move
custom flags to type flags instead of providing
them to clock core flags.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I668a8084d966815a9d9e86c2b18ecb5b18cb6b78

zynqmp: pm: clock: Add support for custom type flags ...

Add support to add extra custom type flags and provide
to caller in topology query.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Id9cc065dbadfed2291dd4f62674d7838da4cdf40

plat: xilinx: zynqmp: Add GET_CALLBACK_DATA function ...

Add GET_CALLBACK_DATA function again as now Linux driver
supports both mailbox as well as ISR method.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ieb99d61976e1cb718fcd1021d9cf4958e7556c81

zynqmp: pm: Remove CLK_TOPSW_LSBUS from invalid clock list ...

CLK_TOPSW_LSBUS is parent of WDT clock. Clock from invalid
clock list would not be registered to CCF framework and so
cannot be used as parent of other clocks.

WDT clock has default parent as CLK_TOPSW_LSBUS(APB clock).
If CLK_TOPSW_LSBUS is not registered, CCF would not recognize
that clock and hence rate of WDT clock would be calculated to
be 0 by CCF(as parent rate is considered 0).

So it is necessary to allow registration of CLK_TOPSW_LSBUS
clock.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iceaba0f137784fc5fd666e66ffc4c143381c6ccc

zynqmp: pm: Add LPD WDT clock to the pm_clock structure ...

This patch adds LPD WDT clock node to the pm_clock clocks structure list
so that LPD WDT can be used from Linux.

Also this patch removes the CLK_LPD_LSBUS from invalid clock list to
allow the registration of this clock to CCF framework as it is the
parent of LPD WDT.

Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iea065aa8150eaba4bb4b42bc6be1fd4b7fe7b403

zynqmp: pm: Fix clock models and IDs of GEM-related clocks ...

GEM-related clock models were incorrect and are fixed as follows
(documented below for GEM0, but the same holds for any GEM ID):

- CLK_GEM0_REF_UNGATED represents clock that has DIV0/1 divisors and
 the multiplexer controllable in GEM0_REF_CTRL (CRL_APB). The ID of this
 clock is newly introduced in this patch.

- CLK_GEM0_REF models the clock mux that selects the reference clock
 for Tx, i.e. selects CLK_GEM0_REF_UNGATED or external Tx clock. This
 mux is controllable via GEM_CLK_CTRL (IOU_SLCR), bit GEM0_REF_SRC_SEL.
 Note that the routing of external clock to the mux is not modelled
 and is assumed to be configured by the FSBL if required, and not
 changeable at runtime. The ID of this clock is introduced in this patch.

- CLK_GEM0_TX models clock with only a gate that is controlled via
 bit 25 in GEM0_REF_CTRL (CRL_APB). The parent of this clock is
 CLK_GEM0_REF. The clock ID of CLK_GEM0_TX matches the previous ID
 value of CLK_GEM0_REF. This is done in order to fix the clock models
 and incorrect binding without requiring to change device-tree (binding
 of clock IDs to GEM interface).

- CLK_GEM0_RX models clock that has only gate controlled via RX_CLKACT
 bit (26) in GEM0_REF_CTRL (CRL_APB). Parent of this clock is sourced
 from external RGMII PHY (via MIO or EMIO). We do not model the whole
 clock path to the Rx gate, since this is configured by the FSBL and
 never changed at runtime (and there is no mechanism to change the
 path at runtime). The clock ID of CLK_GEM0_RX clock is equal to the
 previous ID value of CLK_GEM0_TX clock. This is done because the TX/RX
 were swapped in device tree, so by fixing the IDs this way there is no
 need for device tree fix.

Rates of the external RX/TX clocks can be specified in device tree if
needed. Right now, that's not necessary because Tx clock is sourced
from an on-chip PLL (via CLK_GEM0_REF_UNGATED/CLK_GEM0_REF), whereas
the Rx clock is sourced from external reference and the driver never
attempts to get/get clock rate (only to enable it). If this changes in
future, ATF clock model doesn't need to be changed. Instead, the clock
rates for gem0_tx_ext and gem0_rx_ext have to be specified in device
tree.

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <will.wong@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I6497d4309e92205c527bd81b3aa932f4474f5b79

zynqmp: pm: Rename FPD WDT clock ID ...

This patch renames FPD WDT clock ID from CLK_WDT to CLK_FPD_WDT.

Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I4d00a59b1dc54920115a2da55e8a06347fe2231c

plat: xilinx: zynqmp: Correct syscnt freq for QEMU ...

Correct the syscnt frequency for ZynqMP QEMU to 65Mhz.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Ie0137feb9b7e24ed4e5d6cbf81c58ac77bb69214

arm64: zynqmp: Add idcodes for new RFSoC silicons ZU48DR and ZU49DR ...

Add support for zu48dr and zu49dr to the list of zynqmp devices. The
zu48dr and zu49dr are the new RFSoC silicons with id values of 0x7b
and 0x7e.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I2978f16bb663853951ef8059bf0327f909447f34

arm64: zynqmp: Add id for new RFSoC device ZU39DR ...

This patch adds new RFSoC device ZU39DR to zynqmp
devices list

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I35735da9e7d7facbde44323c49eac1b714e4909d

Enable -Wlogical-op always ...

-Wlogical-op prevents common errors with using numerical constants where
a boolean one is expected as well as when the operands of a logical
operator are the same. While these are perfectly valid behavior, they
can be a sign that something is slightly off.

This patch adds this warning to gcc and it's closest equivalent to
clang, while also fixing any warnings that enabling them causes.

Change-Id: Iabadfc1e6ee0c44eef6685a23b0aed8abef8ce89
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

plat: xilinx: zynqmp: Initialize IPI table from zynqmp_config_setup() ...

Common ipi_table needs to be initialized before using any
IPI command (i.e send/receive). Move zynqmp ipi config table
initialization from sip_svc_setup() to zynqmp_config_setup().

Change-Id: Ic8aaa0728a43936cd4c6e1ed590e01ba8f0fbf5b
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>

zynqmp: add support for multi console interface ...

This patch addds multi console interface for ZynqMP
platform

Change-Id: I508a61412df2b71d04bca6a1139c8f32cbd7dccd
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>

zynqmp: pm: Add support for setting PMU configuration object ...

Allow EL2 (e.g. U-Boot) to load the configuration object at runtime
into the Xilinx ZynqMP PMU firmware. This allows booting with U-Boot
and U-Boot SPL with PMU FW without hard-coding the configuration
object.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>

Merge pull request #1804 from antonio-nino-diaz-arm/an/cleanup ...

Minor cleanup

Remove duplicated definitions of linker symbols ...

Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.

As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.

Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Arm platforms: Rename PLAT_ARM_NS_IMAGE_OFFSET ...

PLAT_ARM_NS_IMAGE_OFFSET is in fact not an offset relative to some base
address, it is an absolute address. Rename it to avoid any confusion.

Change-Id: I1f7f5e8553cb267786afe7e5f3cd4d665b610d3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

plat/arm: Sanitise includes ...

Use full include paths like it is done for common includes.

This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned common files and drivers. This
patch does the same to Arm platforms.

Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

xilinx: Move IPI functions to common file ...

pm_service ipi functions can be used by other xilinx
platforms. So move it to common directory. Also change
node_id member type in pm_proc structure so it can be
used for versal where device IDs are used instead of
node IDs.

To accommodate this change header files are re-organized.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

xilinx: pm_service: Rename macros to use generic macro names ...

ZynqMP pm_service ipi file uses platform specific macros names.
pm_service ipi functions can be used by other Xilinx platforms
also. Make rename macros to use generic names so that it can be
used by common file.

pm_service ipi functions will be moved to common file in next patch.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

xilinx: zynqmp: Rename pm_api members to use generic name ...

Use generic name for pm_api structure member, so that pm_api
structure can be used other Xilinx platforms.

Structure definition will be moved to common file in upcoming
patch.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Move generic ipi_mb functions to common files ...

ipi_mb functions can be used for other Xilinx platform.
Move it to common file from platform specific files.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

xilinx: Remove platform specific dependency from IPI function ...

ipi_mb function uses platform specific ipi configuration table.
These ipi_mb functions can be used for other Xilinx platform.
So, instead of using direct data structure, initialize IPI
configuration data by passing platform specific ipi table.
Macros are updated accordingly for this ipi table change.

This change is done so that ipi_mb functions can be moved to
common file without major changes. All common functions now would
be moved to common file in next patch.

Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Reviewed-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>