Merge "plat: imx8mm: provide uart base as build option" into integration

Merge "hikey960: Enable system power off callback" into integration

Merge changes from topic "xlat" into integration ...

* changes:
  Factor xlat_table sections in linker scripts out into a header file
  xlat_tables_v2: use ARRAY_SIZE in REGISTER_XLAT_CONTEXT_FULL_SPEC
  xlat_tables_v2: merge REGISTER_XLAT_CONTEXT_{FULL_SPEC,RO_BASE_TABLE}

Merge "plat/arm: Retrieve the right ROTPK when using the dualroot CoT" into integration

Factor xlat_table sections in linker scripts out into a header file ...

TF-A has so many linker scripts, at least one linker script for each BL
image, and some platforms have their own ones. They duplicate quite
similar code (and comments).

When we add some changes to linker scripts, we end up with touching
so many files. This is not nice in the maintainability perspective.

When you look at Linux kernel, the common code is macrofied in
include/asm-generic/vmlinux.lds.h, which is included from each arch
linker script, arch/*/kernel/vmlinux.lds.S

TF-A can follow this approach. Let's factor out the common code into
include/common/bl_common.ld.h

As a start point, this commit factors out the xlat_table section.

Change-Id: Ifa369e9b48e8e12702535d721cc2a16d12397895
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge changes from topic "sb/dualroot" into integration ...

* changes:
  plat/arm: Pass cookie argument down to arm_get_rotpk_info()
  plat/arm: Add support for dualroot CoT
  plat/arm: Provide some PROTK files for development

Tegra186: store TZDRAM base/size to scratch registers ...

This patch saves the TZDRAM base and size values to secure scratch
registers, for the WB0. The WB0 reads these values and uses them to
verify integrity of the TZDRAM aperture.

Change-Id: Ic70914cb958249f06cb58025a24d13734a85e16e
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra186: add SE support to generate SHA256 of TZRAM ...

The BL3-1 firmware code is stored in TZSRAM on Tegra186 platforms. This
memory loses power when we enter System Suspend and so its contents are
stored to TZDRAM, before entry. This opens up an attack vector where the
TZDRAM contents might be tampered with when we are in the System Suspend
mode. To mitigate this attack the SE engine calculates the hash of entire
TZSRAM and stores it in PMC scratch, before we copy data to TZDRAM. The
WB0 code will validate the TZDRAM and match the hash with the one in PMC
scratch.

This patch adds driver for the SE engine, with APIs to calculate the hash
and store SE SHA256 hash-result to PMC scratch registers.

Change-Id: Ib487d5629225d3d99bd35d44f0402d6d3cf27ddf
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>

Tegra186: add support for bpmp_ipc driver ...

This patch enables the bpmp-ipc driver for Tegra186 platforms,
to ask BPMP firmware to toggle SE clock.

Change-Id: Ie63587346c4d9b7e54767dbee17d0139fa2818ae
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>

Tegra210: disable ERRATA_A57_829520 ...

ERRATA_A57_829520 disables "indirect branch prediction" for
EL1 on cpu reset, leading to 15% drop in CPU performance
with coremark benchmarks.

Tegra210 already has a hardware fix for ARM BUG#829520,so
this errata is not needed.

This patch disables the errata to get increased performance
numbers.

Change-Id: I0b42e8badd19a8101f6a55d80eb2d953597d3c20
Signed-off-by: Mithun Maragiri <mmaragiri@nvidia.com>

Tegra194: memctrl: add support for MIU4 and MIU5 ...

This patch adds support for memqual miu 4,5.

The MEMQUAL engine has miu0 to miu7 in which miu6 and
miu7 is hardwired to bypass SMMU. So only miu0 to miu5
support is provided.

Change-Id: Ib350334eec521e65f395f1c3205e2cdaf464ebea
Signed-off-by: Pravin <pt@nvidia.com>

Tegra194: memctrl: remove support to reconfigure MSS ...

As bpmp-fw is running at the same time as ATF, and
the mss client reconfiguration sequence involves performing
a hot flush resets on bpmp, there is a chance that bpmp-fw is
trying to perform accesses while the hot flush is active.

Therefore, the mss client reconfigure has been moved to
System Suspend resume fw and bootloader, and it can be
removed from here.

Change-Id: I34019ad12abea9681f5e180af6bc86f2c4c6fc74
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>

Tegra: fiq_glue: remove bakery locks from interrupt handler ...

This patch removes usage of bakery_locks from the FIQ handler, as it
creates unnecessary dependency whenever the watchdog timer interrupt
fires. All operations inside the interrupt handler are 'reads', so
no need for serialization.

Change-Id: I3f675e610e4dabc5b1435fdd24bc28e424f5a8e4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra210: SE: add context save support ...

Tegra210B01 SoCs support atomic context save for the two SE
hardware engines. Tegra210 SoCs have support for only one SE
engine and support a software based save/restore mechanism
instead.

This patch updates the SE driver to make this change.

Change-Id: Ia5e5ed75d0fe011f17809684bbc2ed2338925946
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>

Tegra210: update the PMC blacklisted registers ...

Update the list to include PMC registers that the NS world cannot
access even with smc calls.

Change-Id: I588179b56ebc0c29200b55e6d61535fd3a7a3b7e
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>

Tegra: disable CPUACTLR access from lower exception levels ...

This patch resets the macros to update the CPUACTLR_ELx to make
them generic for all exception levels.

Change-Id: I33e9b860efb543934b654a2f5d775135df7f1aa6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Merge changes from topic "tbbr/fw_enc" into integration ...

* changes:
  docs: qemu: Add instructions to boot using FIP image
  docs: Update docs with firmware encryption feature
  qemu: Support optional encryption of BL31 and BL32 images
  qemu: Update flash address map to keep FIP in secure FLASH0
  Makefile: Add support to optionally encrypt BL31 and BL32
  tools: Add firmware authenticated encryption tool
  TBB: Add an IO abstraction layer to load encrypted firmwares
  drivers: crypto: Add authenticated decryption framework

Merge "uniphier: shrink UNIPHIER_ROM_REGION_SIZE" into integration

uniphier: shrink UNIPHIER_ROM_REGION_SIZE ...

Currently, the ROM region is needlessly too large.

The on-chip SRAM region of the next SoC will start from 0x04000000,
and this will cause the region overlap.

Mapping 0x04000000 for the ROM is enough.

Change-Id: I85ce0bb1120ebff2e3bc7fd13dc0fd15dfff5ff6
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

qemu: Support optional encryption of BL31 and BL32 images ...

Enable encryption IO layer to be stacked above FIP IO layer for optional
encryption of Bl31 and BL32 images in case ENCRYPT_BL31 or ENCRYPT_BL32
build flag is set.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I24cba64728861e833abffc3d5d9807599c49feb6

qemu: Update flash address map to keep FIP in secure FLASH0 ...

Secure FLASH0 memory map looks like:
- Offset: 0 to 256K -> bl1.bin
- Offset: 256K to 4.25M -> fip.bin

FLASH1 is normally used via UEFI/edk2 to keep varstore.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I6883f556c22d6a5d3fa3846c703bebc2abe36765

TBB: Add an IO abstraction layer to load encrypted firmwares ...

TBBR spec advocates for optional encryption of firmwares (see optional
requirement: R060_TBBR_FUNCTION). So add an IO abstaction layer to
support firmware decryption that can be stacked above any underlying IO/
packaging layer like FIP etc. It aims to provide a framework to load any
encrypted IO payload.

Also, add plat_get_enc_key_info() to be implemented in a platform
specific manner as handling of encryption key may vary from one platform
to another.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I9892e0ddf00ebecb8981301dbfa41ea23e078b03

Merge changes from topic "spmd-sel2" into integration ...

* changes:
  SPMD: add command line parameter to run SPM at S-EL2 or S-EL1
  SPMD: smc handler qualify secure origin using booleans
  SPMD: SPMC init, SMC handler cosmetic changes
  SPMD: [tegra] rename el1_sys_regs structure to sys_regs
  SPMD: Adds partially supported EL2 registers.
  SPMD: save/restore EL2 system registers.

Merge changes from topic "console_t_drvdata_fix" into integration ...

* changes:
  imx: console: Use CONSOLE_T_BASE for UART base address
  Tegra: spe: use CONSOLE_T_BASE to save MMIO base address

plat: imx8mm: provide uart base as build option ...

Some boards (f.e. Verdin i.MX8M Mini) use different UART base address
for serial debug output, so make this value configurable (as a
build option).

Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: I988492ccecbc3f64a5153b381c4a97b8a0181f52

imx: console: Use CONSOLE_T_BASE for UART base address ...

Since commit ac71344e9eca we have the UART base address in the generic
console_t structure. For most platforms the platform-specific struct
console is gone, so we *must* use the embedded base address, since there
is no storage behind the generic console_t anymore.

Replace the usage of CONSOLE_T_DRVDATA with CONSOLE_T_BASE to fix this.

Change-Id: I6d2ab0bc2c845c71f98b9dd64d89eef3252f4591
Reported-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Tegra: spe: use CONSOLE_T_BASE to save MMIO base address ...

Commit ac71344 moved the base address
for the MMIO aperture of the console inside the console_t struct. As
a result, the driver should now save the MMIO base address to console_t
at offset marked by the CONSOLE_T_BASE macro.

This patch updates the SPE console driver to use the CONSOLE_T_BASE macro
to save/access the MMIO base address.

Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I42afc2608372687832932269108ed642f218fd40

SPMD: loading Secure Partition payloads ...

This patch implements loading of Secure Partition packages using
existing framework of loading other bl images.

The current framework uses a statically defined array to store all the
possible image types and at run time generates a link list and traverse
through it to load different images.

To load SPs, a new array of fixed size is introduced which will be
dynamically populated based on number of SPs available in the system
and it will be appended to the loadable images list.

Change-Id: I8309f63595f2a71b28a73b922d20ccba9c4f6ae4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>

SPMD: add command line parameter to run SPM at S-EL2 or S-EL1 ...

Added SPMD_SPM_AT_SEL2 build command line parameter.
Set to 1 to run SPM at S-EL2.
Set to 0 to run SPM at S-EL1 (pre-v8.4 or S-EL2 is disabled).
Removed runtime EL from SPM core manifest.

Change-Id: Icb4f5ea4c800f266880db1d410d63fe27a1171c0
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

SPMD: [tegra] rename el1_sys_regs structure to sys_regs ...

Renamed the structure according to a SPMD refactoring
introduced in <c585d07aa> since this structure is used
to service both EL1 and EL2 as opposed to serving only EL1.

Change-Id: I23b7c089e53f617157a4b4e6443acce50d85c3b5
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>