BL31: correct GOT section omission ...

When the patch SHA 931f7c6 introduced PIE support for BL31,
adding the GOT section when the SEPARATE_CODE_AND_RODATA=0
to the linker script was erroneously omitted. This patch corrects
the same.

Also the patch reduces the alignment requirement for GOT and RELA
sections from 16 bytes to 8. Comments are added explain the
intent for alignment.

Change-Id: I8035cbf75f346f99bd56b13f32e0b3b70dd2fe6c
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

FVP: Change BL31_BASE when RESET_TO_BL31=1 ...

This patch defines BL31_BASE to 0x0 when RESET_TO_BL31=1 as the
executable is built with PIE support and can be loaded anywhere
in SRAM for execution.

Change-Id: I4007f4626322f1200a6304c9c565987d3357986c
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Merge pull request #1712 from jeenu-arm/ssbs ...

AArch64: Use SSBS for CVE_2018_3639 mitigation

Merge pull request #1707 from antonio-nino-diaz-arm/an/spm ...

SPM: Initial prototype based on SPCI and SPRT

SPM: Rename files for consistency ...

Rename files prefixed by sp_ to spm_.

Change-Id: Ie3016a4c4ac5987fe6fdd734c6b470c60954e23d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Remove remaining SMC interfaces ...

Also, add a disclaimer to explain that the current implementation of SPM
is a prototype that is going to undergo a lot of rework.

Change-Id: I303c1e61c51d9f286cc599fea565fc9ba5a996bf
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Migrate mem attr get/set helpers to SPRT ...

The old SMCs SP_MEMORY_ATTRIBUTES_{GET,SET}_AARCH64 have been removed in
favour of SPRT_MEMORY_PERM_ATTR_{GET,SET}_AARCH64.

Change-Id: Idb93cfa5461d0098df941037c5653f7c44b65227
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Allow preemption in non-blocking requests ...

Change-Id: I1fdc2285a3f6517a715ad6159322543fd5a37a37
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Support non-blocking calls ...

Note that the arguments passed during the SMC call don't comply with the
SPCI specifications. This will be fixed in following patches, but it is
needed to implement a few more SPCI SMCs to be able to do it. The
current code allows us to start testing it.

Change-Id: Ic13dcc54c40327df03be1b0f52e8a44f468f06b4
Co-authored-by: Jean-Paul Etienne <jean-paul.etienne@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Implement global response buffer helpers ...

This buffer is where all the responses from Secure Partitions are stored
until they are requested.

Change-Id: Iafeb8f0848c5ff6f3e187060cd3a47702484dc45
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Prevent simultaneous blocking calls ...

Blocking calls can only succeed if the target Secure Partition is idle.

Change-Id: Iabeaa0b8d3e653fd8581fa086758936abfc1c772
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Support blocking calls ...

Note that the arguments passed during the SMC call don't comply with the
SPCI specifications. This will be fixed in following patches, but it is
needed to implement a few more SPCI SMCs to be able to do it. The
current code allows us to start testing it.

Change-Id: Ief0e75d072b311737fcdb0c6a60ba5b7406a9ee5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Introduce SPRT C host library ...

Change-Id: If57ec9cc0791f49d9ade83dff9d24ef9047963a8
Co-authored-by: Jean-Paul Etienne <jean-paul.etienne@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Implement SPCI open/close handle SMCs ...

Introduce SMCs that open and close handles according to the SPCI
specification.

Change-Id: I65f365f15612e01aa445e783e96e48ae275c39fd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Introduce SMC handlers for SPCI and SPRT ...

Change-Id: I2ae9b3bb686c41b2e138132a7bed107925ac861e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Support multiple xlat tables contexts ...

Change-Id: Ib7c2529b85bb5930d44907edfc8ead13d3b1ef4d
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Support multiple partitions ...

Change-Id: I6673a5f8c2f6afa7780483e0ce8d4dad4c8dc8ea
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Remove old SMC interfaces ...

Remove interfaces based on MM_COMMUNICATE.

Change-Id: I628c884b91d9f4758269ea2c4dedc37a66bb93cf
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Map memory regions from RD ...

SPM needs to map a number of regions on behalf of the secure partition.
Previously, it used to get a list of them from platform code using the
plat_get_secure_partition_mmap() API. Now it gets them from the resource
description structure.

The SPM<->SP shared buffer is mapped dynamically at EL3. This buffer is
used to pass information between SPM and SP, so it must be mapped at EL3
as well in order to be used by SPM.

Dynamic translation tables have been enabled when the Trusted Firmware
is compiled with SPM support.

Change-Id: I64ad335e931661812a0a60558e60372e1e5e6b72
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Read entrypoint from resource descriptor ...

Read entrypoint of the Secure Partition from the resource description
struct.

Change-Id: Ie693c7b4d4fecafd85b6934d9d8c4232efb1dc55
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Load image and RD from SP package ...

Load SP and RD from package instead of relying on RD being already
loaded in memory and the SP being loaded as a BL32 image.

Change-Id: I18d4fbf4597656c6a7e878e1d7c01a8a324f3f8a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: sptool: Introduce tool to package SP and RD ...

This tool packages Secure Partitions and Resource Descriptor blobs into
a simple file that can be loaded by SPM.

Change-Id: If3800064f30bdc3d7fc6a15ffbb3007ef632bcaa
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1714 from chandnich/sgiclark-helios ...

SGI-Clark.Helios platform support patches

SPM: Remove SP memory mappings definitions ...

This information is retrieved from the resource description now.

Change-Id: Iaae23945eb2c45305cdc6442853e42f4e04fe094
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Deprecate boot info struct ...

This information is defined by the Secure Partition in the resource
description.

Change-Id: Ia7db90c5de8360a596106880d3f6a632a88d3ea8
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Introduce functions to load DTB files ...

Introduce helpers to create resource description struct, as well as code
to load the information from DTB files.

Change-Id: I0f5bb94eb8b01c6cb53fe807a9db0c05a70d7a43
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Define resource description data structures ...

The structures and associated definitions are in different files so that
the definitions can be used inside DTS files while the structs are
private to SPM. They follow the SPRT specification.

Change-Id: Id6a629040a086c482b9d9fa1883b8aa6bbee619f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

SPM: Deprecate the current implementation ...

The current SPM is a prototype that only supports one secure partition
in EL0. The objective of SPM is to have multiple partitions. The current
MM interface isn't adequate for this, so it is needed to modify heavily
the code to add proper support for it.

However, there are platforms which are already using this (like SGI) and
removing the code would break it.  For this reason, the current SPM code
has been duplicated in order to temporarily preserve compatibility. All
new improvements/changes to SPM will be done in the non-deprecated copy,
that may change without notice.

The new build option SPM_DEPRECATED has been introduced to select the SPM
implementation. It defaults to 1, that selects the deprecated SPM.

Change-Id: Ic9f80b53b450e97b4d3f47e4ef4a138ee8d87443
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

fvp: Increase stack size when SPM is enabled ...

Change-Id: Iec265dc85d44f35048d1fbcfbe55960d45570027
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

AArch64: Use SSBS for CVE_2018_3639 mitigation ...

The Armv8.5 extensions introduces PSTATE.SSBS (Speculation Store Bypass
Safe) bit to mitigate against Variant 4 vulnerabilities. Although an
Armv8.5 feature, this can be implemented by CPUs implementing earlier
version of the architecture.

With this patch, when both PSTATE.SSBS is implemented and
DYNAMIC_WORKAROUND_CVE_2018_3639 is active, querying for
SMCCC_ARCH_WORKAROUND_2 via. SMCCC_ARCH_FEATURES call would return 1 to
indicate that mitigation on the PE is either permanently enabled or not
required.

When SSBS is implemented, SCTLR_EL3.DSSBS is initialized to 0 at reset
of every BL stage. This means that EL3 always executes with mitigation
applied.

For Cortex A76, if the PE implements SSBS, the existing mitigation (by
using a different vector table, and tweaking CPU ACTLR2) is not used.

Change-Id: Ib0386c5714184144d4747951751c2fc6ba4242b6
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>