Merge pull request #1349 from amitdanielkachhap/juno_fix_bl2_sizes ...

Juno: Increase bl2 max size to fix build when SPD=opteed

Merge pull request #1341 from vwadekar/improve-mmap-efficiency ...

lib: xlat_tables_v2: reduce time required to add a mmap region

Merge pull request #1306 from JiafeiPan/master ...

layerscape: Initial ATF support for LS1043ardb

Juno: Add support for TrustZone Media Protection 1 (TZMP1) ...

Add TZMP1 support on Juno and increase the BL2 size accordingly due to the
extra data structures to describe the TZC regions and the additional code.

Signed-off-by: Summer Qin <summer.qin@arm.com>

plat/arm: Allow override of default TZC regions ...

This patch allows the ARM Platforms to specify the TZC regions to be
specified to the ARM TZC helpers in arm_tzc400.c and arm_tzc_dmc500.c.
If the regions are not specified then the default TZC region will be
configured by these helpers.

This override mechanism allows specifying special regions for TZMP1
usecase.

Signed-off-by: Summer Qin <summer.qin@arm.com>

Add NXP to contributor list ...

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>

layerscape: Initial TF-A support for LS1043ardb ...

This patch introduce TF-A support for NXP's ls1043a platform.
more details information of ls1043a chip and ls1043ardb board
can be found at docs/plat/ls1043a.rst.

Boot sequence on ls1043a is: bootrom loads bl1 firstly, then bl1
loads bl2, bl2 will load bl31, bl32 and bl33, bl31 will boot
bl32(tee os) and bl33(u-boot or uefi), bl33 boot Linux kernel.

Now TF-A on ls1043ardb platform has the following features in this patch:
	* Support boot from Nor flash.
	* TF-A can boot bl33 which runs in el2 of non-secure world.
	* TF-A boot OPTee OS.
	* Support PSCI

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Chenyin.Ha <Chenyin.Ha@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
Signed-off-by: Wen He <wen.he_1@nxp.com>

lib: xlat_tables_v2: reduce time required to add a mmap region ...

The last entry in the mapping table is not necessarily the same as the
end of the table. This patch loops through the table to find the last
entry marker, on every new mmap addition. The memove operation then
has to only move the memory between current entry and the last entry.
For platforms that arrange their MMIO map properly, this opearation
turns out to be a NOP.

The previous implementation added significant overhead per mmap
addition as the memmove operation always moved the difference between
the current mmap entry and the end of the table.

Tested on Tegra platforms and this new approach improves the memory
mapping time by ~75%, thus significantly reducing boot time on some
platforms.

Change-Id: Ie3478fa5942379282ef58bee2085da799137e2ca
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Merge pull request #1328 from JiafeiPan/upstream-bl2-rom ...

Add support for BL2 in XIP memory

Juno: Increase bl2 max size to fix build when SPD=opteed ...

Building TBBR(SPD=opteed) and non-TBBR TF-A images is breaking for
Juno for different configurations listed below:

* Overflow error of 4096 bytes for rsa algorithm.
* Overflow error of 8192 bytes for ecdsa algorithm.
* Overflow error of 4096 bytes for rsa+ecdsa algorithm.
* Overflow error of 4096 bytes for non-TBBR case.

So this patch increments macro PLAT_ARM_MAX_BL2_SIZE for all the above
cases accordingly.

Change-Id: I75ec6c0a718181d34553fe55437f0496f467683f
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>

DMC500: Add platform support to set system interface count ...

Some low end platforms using DMC500 memory controller do not have
CCI(Cache Coherent Interconnect) interface and only have non-coherent
system interface support. Hence this patch makes the system interface
count configurable from the platforms.

Change-Id: I6d54c90eb72fd18026c6470c1f7fd26c59dc4b9a
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>

Merge pull request #1339 from dp-arm/dp/smccc ...

Fixup SMCCC_FEATURES return value for SMCCC_ARCH_WORKAROUND_1

fix instruction address range limitation ...

For the adr instruction, it require the label's offset from the
address of this instruction must be in the range +/-1MB. If the
option "BL2_IN_XIP_MEM" is set to '1', in some cases, BL2's RW
memory will not in the range of +/-1MB from BL2's RO memory region.
so we need to use ldr instruction to cover this case.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>

Add support for BL2 in XIP memory ...

In some use-cases BL2 will be stored in eXecute In Place (XIP) memory,
like BL1. In these use-cases, it is necessary to initialize the RW sections
in RAM, while leaving the RO sections in place. This patch enable this
use-case with a new build option, BL2_IN_XIP_MEM. For now, this option
is only supported when BL2_AT_EL3 is 1.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>

rockchip/rk3399: Fix sram_udelay ...

This fixes an off by 576x bug the the sram_udelay code. The wrong
value was multipled by the system ticks per mhz value (which is 24),
so we delayed for 1/576th of the requested time.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>

FVP: Fix function for translating MPIDR to linear index ...

The current AArch32 version of plat_arm_calc_core_pos uses an incorrect
algorithm to calculate the linear position of a core / PE from its
MPIDR.

This patch corrects the algorithm to:

(ClusterId * FVP_MAX_CPUS_PER_CLUSTER) * FVP_MAX_PE_PER_CPU
+ (CPUId * FVP_MAX_PE_PER_CPU)
+ ThreadId

which supports cores where there are more than 1 PE per CPU.

NOTE: the AArch64 version was fixed in 39b21d1

Change-Id: I72aea89d8f72f8b1fef54e2177a0fa6fef0f5513
Signed-off-by: David Cunado <david.cunado@arm.com>

Merge pull request #1338 from antonio-nino-diaz-arm/an/spm-flag-check ...

SPM: Assert value of `ENABLE_SPM` build flag

Fixup SMCCC_FEATURES return value for SMCCC_ARCH_WORKAROUND_1 ...

Only return -1 if the workaround for CVE-2017-5715 is not compiled in.

Change-Id: I1bd07c57d22b4a13cf51b35be141a1f1ffb065ff
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Merge pull request #1334 from michpappas/tf-issues#572_qemu_dont_use_C_for_crash_console ...

qemu: don't use C functions for the crash console callbacks

SPM: Assert value of `ENABLE_SPM` build flag ...

The Makefile was missing a check to verify that the value of
`ENABLE_SPM` is boolean.

Change-Id: I97222e4df9ae2fbd89cdb3263956dca52d360993
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

qemu: don't use C functions for the crash console callbacks ...

Use the console_pl011_core_* functions directly in the crash console
callbacks.

This bypasses the MULTI_CONSOLE_API for the crash console (UART1), but
allows using the crash console before the C runtime has been initialized
(eg to call ASM_ASSERT). This retains backwards compatibility with respect
to functionality when the old API is used.

Use the MULTI_CONSOLE_API to register UART0 as the boot and runtime
console.

Fixes ARM-software/tf-issues#572

Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>

Merge pull request #1327 from npoushin/npoushin/sgi575 ...

ARM platforms: Add support for SGI575

Merge pull request #1313 from jonathanwright-ARM/jw/MISRA-switch-statements ...

Fix switch statements to comply with MISRA rules

Merge pull request #1333 from jeenu-arm/icfg-fix ...

GIC: Fix interrupt setting interrupt configuration

Merge pull request #1325 from michpappas/tf-issues#568_qemu_add_ENABLE_STACK_PROTECTOR ...

qemu: Add support for stack canary protection

Merge pull request #1331 from hzhuang1/reboot_delay ...

hikey960: add delay before reset

Merge pull request #1329 from antonio-nino-diaz-arm/an/rpi3-multi-console ...

rpi3: Migrate to the multi console API

Merge pull request #1335 from JoelHutton/jh/cleanup_void_pointers ...

Clean usage of void pointers to access symbols

Merge pull request #1336 from jonathanwright-ARM/jw/MISRA-init-arrays ...

psci: initialize array fully to comply with MISRA

ARM platforms: Add support for SGI575 ...

Add support for System Guidance for Infrastructure platform SGI575.

Change-Id: I0125c2ed4469fbc8367dafcc8adce770b6b3147d
Signed-off-by: Nariman Poushin <nariman.poushin@linaro.org>