LuminaSensum/arm-trusted-firmware

Fork: 0

LuminaSensum / arm-trusted-firmware

History for arm-trusted-firmware / plat

2017-11-07	Unverified 2904f84 Browse files » Merge pull request #1155 from masahir0y/uniphier ... Fix build error when creating ROT key for UniPhier platform davidcunado-arm authored on 7 Nov 2017 GitHub committed on 7 Nov 2017
2017-11-06	3c94615 Browse files » uniphier: make sure to create build directory before ROT key ... Building the UniPhier platform in parallel with TRUSTED_BOARD_BOOT=1 could fail due to non-existing directory. It might be difficult to reproduce, but here is an easier way to trigger the problem: $ make PLAT=uniphier TRUSTED_BOARD_BOOT=1 MBEDTLS_DIR=mbedtls certificates OPENSSL build/uniphier/release/rot_key.pem /bin/sh: 1: cannot create build/uniphier/release/rot_key.pem: Directory nonexistent make: *** [build/uniphier/release/rot_key.pem] Error 2 The $(ROT_KEY) must depend on $(BUILD_PLAT) so that the build directory is created before the key. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Masahiro Yamada committed on 6 Nov 2017
	8012cc5 Browse files » Build: introduce ${BUILD_PLAT} target to create the top build directory ... Some platforms (for ex. UniPhier) want to create files in the very top of the build directory. Add ${BUILD_PLAT} so such files can depend on it. Make existing directory targets depend on ${BUILD_PLAT} because they are sub-directories of ${BUILD_PLAT}. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Masahiro Yamada committed on 6 Nov 2017
	Unverified 92c5066 Browse files » Merge pull request #1153 from robertovargas-arm/fix-macros ... Avoid use of undefined macros davidcunado-arm authored on 6 Nov 2017 GitHub committed on 6 Nov 2017
2017-11-03	Unverified 157650c Browse files » Merge pull request #1142 from etienne-lms/qemu-int ... qemu: update deprecated interrupt registering davidcunado-arm authored on 3 Nov 2017 GitHub committed on 3 Nov 2017
2017-11-03	Unverified 3de7d58 Browse files » Merge pull request #1137 from soby-mathew/sm/arm_plat_en_gicv3_save ... Enable GICv3 save for ARM platforms davidcunado-arm authored on 3 Nov 2017 GitHub committed on 3 Nov 2017
2017-11-02	ad3803b Browse files » qemu: update deprecated interrupt registering ... Registered interrupts are configured in edge detection as the default previous configuration assumed in previous code. Not target mask required as Qemu BL31 will not send/route SGIs. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Etienne Carriere committed on 2 Nov 2017
2017-11-01	e8a87ac Browse files » Fix usage of IMAGE_BLx macros ... These macros are only defined for corresponding image, and they are undefined for other images. It means that we have to use ifdef or defined() instead of relying on being 0 by default. Change-Id: Iad11efab9830ddf471599b46286e1c56581ef5a7 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 1 Nov 2017
2017-11-01	d58f3ca Browse files » Always define ARM_TSP_RAM_LOCATION_ID ... ARM_TSP_RAM_LOCATION_ID was defined only in AARCH64, but the macro was also used in AARCH32, and it meant that it was taking the value 0, which happened to equal ARM_TRUSTED_SRAM_ID. Change-Id: If9f4dbee1a2ba15e7806f2a03305b554bd327363 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 1 Nov 2017
2017-10-31	Unverified 27b2493 Browse files » Merge pull request #1141 from robertovargas-arm/boot_redundancy ... Add platform hooks for boot redundancy support davidcunado-arm authored on 31 Oct 2017 GitHub committed on 31 Oct 2017
2017-10-30	Unverified a2ef56a Browse files » Merge pull request #1144 from geesun/qx/resize_bl2_size ... Change the default option of ARM_TSP_RAM_LOCATION and Enlarge the BL2 size on ARM platforms davidcunado-arm authored on 30 Oct 2017 GitHub committed on 30 Oct 2017
2017-10-26	2455224 Browse files » Merge pull request #1147 from etienne-lms/qemu-optee-load ... qemu/optee: load OP-TEE pageable part 2MB above OP-TEE image davidcunado-arm authored on 26 Oct 2017 GitHub committed on 26 Oct 2017
	9071400 Browse files » Merge pull request #1143 from etienne-lms/qemu-hpen ... qemu: fix holding pen mailbox sequence davidcunado-arm authored on 26 Oct 2017 GitHub committed on 26 Oct 2017
	11d9b20 Browse files » qemu/optee: load OP-TEE pageable part 2MB above OP-TEE image ... OP-TEE dedicates the end of the Qemu secure DRAM as specific out-of-TEE secure RAM. To support this configuration the trusted firmware should not load OP-TEE resources in this area. To overcome the issue, OP-TEE pageable image is now loaded 2MByte above the secure RAM base address. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Etienne Carriere committed on 26 Oct 2017
	cebec74 Browse files » Merge pull request #1138 from michpappas/tf-issues#526_qemu_does_not_support_TBB ... qemu: Add support for Trusted Board Boot davidcunado-arm authored on 26 Oct 2017 GitHub committed on 26 Oct 2017
2017-10-24	5cc34b1 Browse files » qemu: Add support for Trusted Board Boot ... This patch adds support for TBB to qemu. An RSA ROT keypair is generated at build time and is included into BL1/BL2. The key and content certificates are read over semihosting. Fixes ARM-software/tf-issues#526 Signed-off-by: Michalis Pappas <mpappas@fastmail.fm> Michalis Pappas committed on 24 Oct 2017
	9b1eae9 Browse files » plat/arm: enlarge the BL2 size on Arm platforms when TBB is enabled ... For Trusted Board Boot, BL2 needs more space to support the ECDSA and ECDSA+RSA algorithms. Change-Id: Ie7eda9a1315ce836dbc6d18d6588f8d17891a92d Signed-off-by: Qixiang Xu <qixiang.xu@arm.com> Qixiang Xu committed on 24 Oct 2017
	7ca267b Browse files » plat/arm: change the default option of ARM_TSP_RAM_LOCATION ... On Arm standard platforms, it runs out of SRAM space when TBB is enabled, so the TSP default location is changed to dram when TBB is enabled. Change-Id: I516687013ad436ef454d2055d4e6fce06e467044 Signed-off-by: Qixiang Xu <qixiang.xu@arm.com> Qixiang Xu committed on 24 Oct 2017
	01f62b6 Browse files » Add platform hooks for boot redundancy support ... These hooks are intended to allow one platform to try load images from alternative places. There is a hook to initialize the sequence of boot locations and a hook to pass to the next sequence. Change-Id: Ia0f84c415208dc4fa4f9d060d58476db23efa5b2 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com> Roberto Vargas committed on 24 Oct 2017
	33dd33f Browse files » qemu: fix holding pen mailbox sequence ... Before this change, plat_secondary_cold_boot_setup reads wake up mailbox as a byte array but through 64bit accesses on unaligned 64bit addresses. In the other hand qemu_pwr_domain_on wakes secondary cores by writing into a 64bit array. This change forces the 64bit mailbox format as PLAT_QEMU_HOLD_ENTRY_SIZE explicitly specifies it. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Etienne Carriere committed on 24 Oct 2017
2017-10-23	3b39efa Browse files » Merge pull request #1139 from hzhuang1/fix_edmac ... Fix edmac davidcunado-arm authored on 23 Oct 2017 GitHub committed on 23 Oct 2017
2017-10-21	f911e22 Browse files » Merge pull request #1131 from jeenu-arm/gic-migrate ... Migrate upstream platforms to using interrupt properties davidcunado-arm authored on 21 Oct 2017 GitHub committed on 21 Oct 2017
2017-10-21	623c437 Browse files » Merge pull request #1130 from jeenu-arm/gic-patches ... New GIC APIs and specifying interrupt propertes davidcunado-arm authored on 21 Oct 2017 GitHub committed on 21 Oct 2017
2017-10-18	917d796 Browse files » uniphier: move ROTPK hash to .rodata section ... This is not executable code. It should be put into .rodata instead of .text section. This produces more correct BL1 image when SEPARATE_CODE_AND_RODATA is defined. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Masahiro Yamada committed on 18 Oct 2017
	454748f Browse files » HiKey: make RTC out of reset mode ... Make RTC out of reset mode since it may be used in UEFI. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 18 Oct 2017
	f715bfd Browse files » HiKey: init EDMA controller with non secure mode ... Init EDMA controller with non secure mode. A lot of peripherals are depend on EDMA controller. But EDMA controller is in secure mode by default. And this operation has to be executed in secure mode. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Haojian Zhuang committed on 18 Oct 2017
2017-10-17	95ad62b Browse files » zynqmp: Migrate to using interrupt properties ... Change-Id: Ia8503d446cc8b4246013046f6294fea364c9c882 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com> Jeenu Viswambharan committed on 17 Oct 2017
	831b375 Browse files » mt8173: Migrate to using interrupt properties ... Change-Id: I1463a4f9b74d74d59ac1d37b7b9c8e53416ab904 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com> Jeenu Viswambharan committed on 17 Oct 2017
	be9a750 Browse files » poplar: Migrate to using interrupt properties ... Change-Id: Ibca6ea29be32783de666e0e0a0481668fc11860f Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com> Jeenu Viswambharan committed on 17 Oct 2017
2017-10-16	a982f43 Browse files » uniphier: Migrate to using interrupt properties ... Change-Id: I795ec540942130b5ddc0fa1fd7167f7e1d1ae967 Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com> Jeenu Viswambharan committed on 16 Oct 2017