SPM: Declare explicit width based types in secure_partition_boot_info_t structure ...

The secure_partition_boot_info_t structure is used to communicate boot
parameters with the StandaloneMM code executing at S-EL0 through a
shared buffer. Certain data types used for members of this structure
are opaque with their size depending on the toolchain being used.

Declare the members of the structure with explicit width based data
types, which would maintain compatibility across toolchains.

Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>

Merge pull request #1229 from manojkumar-arm/manojkumar-arm/ca72-aarch32-reset-fix ...

lib/cpus: fix branching in reset function for cortex-a72 AARCH32 mode

Merge pull request #1227 from geesun/qx/emmc_macros ...

emmc: add macros CMD21, BUS_WIDTH_DDR_4 and BUS_WIDTH_DDR_8

Merge pull request #1200 from robertovargas-arm/bl2-el3 ...

Add BL2_AT_EL3 build option

lib/cpus: fix branching in reset function for cortex-a72 AARCH32 mode ...

In AARCH32 mode, cortex_a72_reset_func branches to address in lr
register instead of r5 register. This leads to linux boot failure
of Cortex-A72 cores in AARCH32 mode on Juno-R2 board.

This patch fixes the branching of cortex_a72_reset_func to r5
register as in cortex_a57_reset_func implementation.

Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>

bl2-el3: Don't compile BL1 when BL2_AT_EL3 is defined in FVP ...

This patch modifies the makefiles to avoid the definition
of BL1_SOURCES and BL2_SOURCES in the tbbr makefiles, and
it lets to the platform makefiles to define them if they
actually need these images. In the case of BL2_AT_EL3
BL1 will not be needed usually because the Boot ROM will
jump directly to BL2.

Change-Id: Ib6845a260633a22a646088629bcd7387fe35dcf9
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

bl2-el3: Don't include BL2 in fip for BL2 at EL3 ...

It is better to not include BL2 in FIP when using `BL2 at EL3` as
platforms using this config would not have the capability to parse the
FIP format in Boot ROM and BL2 needs to be loaded independently. This
patch does the required changes for the same.

Change-Id: Iad285c247b3440e2d827fef97c3dd81f5c09cabc
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

bl2-el3: Add documentation for BL2 at EL3 ...

Update firmware-design.rst, porting-guide.rst and user-guide.rst
with the information about BL2 at EL3. Firmware-design.rst is
also update to explain how to test this feauture with FVP.

Change-Id: I86d64bc64594e13eb041cea9cefa3f7f3fa745bd
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

bl2-el3: Mark all the assembly functions in bl2 at el3 ...

When BL2_AT_EL3 option is enabled some platforms are going to
need a resident part in BL2 because the boot rom may jump to it
after a reset. This patch introduces __TEXT_RESIDENT_START__ and
__TEXT_RESIDENT_END__ linker symbols that mark the resident region.

Change-Id: Ib20c1b8ee257831bcc0ca7d3df98d0cb617a04f8
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Mark functions defined in assembly files ...

This patch change the name of the section containing the functions
defined in assembly files from text.* to text.asm.*. This change
makes possible to select in the linker script the functions
defined in those files.

Change-Id: If35e44ef1b43ffd951dfac5e052db75d7198e2e0
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

bl2-el3: Add BL2 at EL3 support in FVP ...

This patch add supports for the new API added for BL2 at EL3 for
FVP. We don't have a non-TF Boot ROM for FVP, but this option can be
tested setting specific parameters in the model.

The bl2 image is loaded directly in memory instead of being loaded
by a non-TF Boot ROM and the reset address is changed:

	--data cluster0.cpu0=bl2.bin@0x4001000
	-C cluster0.cpu0.RVBAR=0x4001000

These parameters mean that in the cold boot path the processor will
jump to BL2 again. For this reason, BL2 is loaded in dram in this
case, to avoid other images reclaiming BL2 memory.

Change-Id: Ieb2ff8535a9e67ccebcd8c2212cad366e7776422
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

bl2-el3: Add BL2_EL3 image ...

This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL
stages without need for BL1.  This is not currently possible because
BL2 executes at S-EL1 and cannot jump straight to EL3.

Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Merge pull request #1226 from masahir0y/utils ...

utils: rename struct mem_region_t to struct mem_region

Merge pull request #1211 from Leo-Yan/remove_ca73_cpu_nap_state ...

Hikey960: Remove ca73 cpu nap state

emmc: add macros CMD21, BUS_WIDTH_DDR_4 and BUS_WIDTH_DDR_8 ...

Add some macros according to JEDEC Standard Embedded Multi-Media
Card (eMMC) Electrical Standard (5.1)": Table 145 - Bus Mode
Selection.

Change-Id: Iaa45e0582653ef4290efd60d039f0bdc420eeb47
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>

utils: rename struct mem_region_t to struct mem_region ...

typedef mem_region_t mem_region_t;

... seems to work because they belong to different name-spaces,
but humans are confused even if compilers are not.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Hikey960: Change CPU standby state for WFI ...

At early time, the CPU CA73 retention state has been supported on
Hikey960.  Later we found the system has the hang issue and for
resolving this issue Hisilicon released new MCU firmware, but
unfortunately the new MCU firmware has side effect and results in the
CA73 CPU cannot really enter retention state and roll back to WFI state.

After discussion we cannot see the possibility to enable CA73 retention
state anymore on Hikey960, based on this conclusion we should remove
this state supporting from ARM-TF and roll back to WFI state only.  We
will commit one patch to remove CA73 CPU retention state in kernel DT
binding as well.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Kevin Wang <jean.wangtao@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Revert "Hikey960: Change to use recommended power state id format" ...

This reverts commit fdae60b.

The commit fdae60b changed the
parameter encoding for the hikey960.  However that implies a DT change
in the kernel side.  After submitting the DT change for upstreaming,
the backward compatibility issue and the interface change raise some
concerns from the Linux community about the issues related to kernel <->
ATF alignment.  There is no way to detect a mis-alignment of those
without a deep knowledge of the ATF and the kernel.  Furthermore, the
failing calls to PSCI in the idle path (because of bad parameters), will
lead to busy looping, implying: thermal issues and extra energy
consumption.

In regard of the Linux community concerns, the potential issues when the
ATF and the kernel are not aligned, it is preferable to revert the
commit.

Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Kevin Wang <jean.wangtao@linaro.org>
Co-authored-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

Merge pull request #1221 from hzhuang1/fix_HLE ...

emmc/dw_mmc: fix the assert on HLE bit

Merge pull request #1219 from antonio-nino-diaz-arm/an/mm-version ...

SPM: Fix version header definitions

Merge pull request #1218 from antonio-nino-diaz-arm/an/xlat-fix ...

xlat v2: Correctly unmap regions on map error

Merge pull request #1216 from hzhuang1/fix_psci ...

Hikey960: Fix hikey960 pcie mount fail

Merge pull request #1215 from vwadekar/tlkd-ns-dram-ranges ...

spd: tlkd: support for "NS memory ranges" function ID

Merge pull request #1217 from robertovargas-arm/doc-plat_try_next_boot_source ...

Add documentation about plat_try_next_boot_source to bl1_platform_setup

Merge pull request #1213 from masahir0y/uniphier ...

uniphier: clean-up platform makefile

Merge pull request #1225 from dp-arm/dp/amu-remove-warn ...

AMU: Remove unnecessary WARN()

AMU: Remove unnecessary WARN() ...

If AMU is not supported by the hardware but it is enabled in Trusted
Firmware, the console will be spammed with warnings every time a CPU
is brought up with a CPU ON call.

Remove the warning message as this is more in line with how other
extensions like SPE and SVE are handled.

Change-Id: Iba6d367e4d1375ab554d23d2eaceab3ae1362c5a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Merge pull request #1197 from dp-arm/dp/amu ...

AMUv1 support

Merge pull request #1214 from dp-arm/dp/cve_2017_5715 ...

Workarounds for CVE-2017-5715 on Cortex A57/A72/A73 and A75

Merge pull request #1222 from davidcunado-arm/dp/bl31_mem ...

Increase BL31 memory space by 2 pages