Merge "Select the Log Level for the Event Log Dump on Measured Boot at build time." into integration

plat: tc0: enable TZC ...

Change-Id: Ic2bb8482f0b602f6b7850d4fa553448bc4931edc
Signed-off-by: Usama Arif <usama.arif@arm.com>

clk: stm32mp1: fix rcc mckprot status ...

MCKPROT hardening in RCC mandates that both bits RCC[TZEN] and
RCC[MCKPROT] are enabled. This change fixes stm32mp1_rcc_is_mckprot()
to check both bits, not RCC[MCKPROT] only.

This change also updates stm32mp1_rcc_is_secure() for consistency.

Change-Id: If1f07babdcb5677906ddbf974d9dc17255d4e174
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

drivers: st: add missing includes in ETZPC header ...

Depending on compiler, the issue about bool or uint*_t not defined can
appear.
Correct this by adding stdbool.h and stdint.h includes in etzpc.h.

Change-Id: If1419dc511efbe682459fa4a776481fa52a38aa3
Signed-off-by: Yann Gautier <yann.gautier@st.com>

mmc: st: clear some flags before sending a command ...

The ICR static flags are cleared before sending a command.
The SDMMC_DCTRLR register is set to 0 if no data is expected on a given
command or on the next command in case of CMD55.

Change-Id: I5ae172a484218f53160e98b3684967c6960475a6
Signed-off-by: Yann Gautier <yann.gautier@st.com>

mmc: st: correct retries management ...

The retries number should be 3.
A warning message is added in mmc_block_read(), and the code is refactored.

Change-Id: I577c7dd91c451c7580b1660042cb5fe26ee3fa12
Signed-off-by: Yann Gautier <yann.gautier@st.com>

nand: raw_nand: fix timeout issue in nand_wait_ready ...

nand_wait_ready is called with a millisecond delay
but the timeout used a micro second. Fixing the conversion
in the timeout call.
The prototype of the function is also changed to use an unsigned int
parameter.

Change-Id: Ia3281be7980477dfbfdb842308d35ecd8b926fb8
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

mtd: spi_nor: change message level on macronix detection ...

Change the detection message from WARN to INFO when macronix
NOR is detected.

Change-Id: I488696f1fb75b823e85decfcd6cd32e7b36a6c2e
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

gpio: stm32_gpio: check GPIO node status after checking DT ...

The call to fdt_get_status(node) has to be done after the DT is found
to be valid.

Fixes: 1fc2130c5 stm32mp1: update device tree and gpio functions

Change-Id: I70f803aae3dde128a9e740f54c8837b64cb1a244
Signed-off-by: Yann Gautier <yann.gautier@st.com>

crypto: stm32_hash: fix issue when restarting computation ...

While restarting a new hash computation, STR register
is not cleared. It needs to be written before each
computation.

Change-Id: If65902dd21f9c139ec5da3ca87721232f73710db
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Merge "libc: Import strtok_r from FreeBSD project" into integration

fdts: tc0: update MHUv2 interrupt number ...

This is as part of the architecture change in TC0.

Change-Id: I470241f67938e7998941d26f0e8bc05073234152
Signed-off-by: Usama Arif <usama.arif@arm.com>

Select the Log Level for the Event Log Dump on Measured Boot at build time. ...

Builds in Debug mode with Measured Boot enabled might run out of trusted
SRAM. This patch allows to change the Log Level at which the Measured Boot
driver will dump the event log, so the latter can be accessed even on
Release builds if necessary, saving space on RAM.

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I133689e313776cb3f231b774c26cbca4760fa120

Merge "plat: marvell: ap807: implement workaround for errata-id 3033912" into integration

Merge "SPMC: adjust the number of EC context to max number of PEs" into integration

stm32mp1: correct crash console GPIO alternate configuration ...

If GPIO port for UART TX is less than 8, the register GPIO_AFRL should
be used to set the alternate. GPIO_AFRH is used if GPIO port is greater
or equal to 8. The macro GPIO_TX_ALT_SHIFT is removed and the GPIO port
number is tested against GPIO_ALT_LOWER_LIMIT (=8) in
plat_crash_console_init() function.

Change-Id: Ibb62223ed6bce589bbcab59a5e986b2677e6d118
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: add plat_panic_handler function ...

The STM32MP1 implementation of this function will call
plat_report_exception(). It displays more information about the panic
if DEBUG is enabled.
The LR register is also filled with R6 content, which hold the faulty
address. This allows debugger to reconstruct the backtrace.

Change-Id: I6710e8e2ab6658b05c5bbad2f3c545f07f355afb
Signed-off-by: Yann Gautier <yann.gautier@st.com>

stm32mp1: update plat_report_exception ...

In case DEBUG is enabled, plat_report_exception will now display extra
information of the cause of the exception.

Change-Id: I72cc9d180959cbf31c13821dd051eaf4462b733e
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Align AARCH32 version of debug.S with AARCH64 ...

Re-order code (put panic and report_exception at the end of the file).
Export asm_print_* functions.
Add asm_print_line_dec macro, and asm_print_newline func.
Align comments in both AARCH32 and AARCH64 files.
Add blank lines in AARCH64 files to align with AARCH32.

Change-Id: I8e299a27c1390f71f04e260cd4a0e59b2384eb19
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Merge "n1sdp: add support for remote chip pcie." into integration

Merge "build_macros.mk: include assert and define loop macros" into integration

Merge "defaults.mk: default KEY_SIZE to 2048 in case of RSA algorithm" into integration

libc: Import strtok_r from FreeBSD project ...

From commit: 21571b1
Made small changes to fit into TF-A project

Change-Id: I991f653a7ace04f9c84bcda78ad8d7114ea18e93
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Merge changes from topic "ehf_common" into integration ...

* changes:
  plat: tegra: Use generic ehf defines
  ehf: use common priority level enumuration

Merge "spmd: remove assert for SPMC PC value" into integration

Merge "doc: Recommend using C rather than assembly language" into integration

n1sdp: add support for remote chip pcie. ...

Remote chip  ITS, SMMU, PCIe nodes are added for enabling remote
chip PCIe hierarchy.

Change-Id: I5b3ca733715defa38e413588ccd13d0688cba271
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>

Merge "SPE: Fix feature detection" into integration

Merge changes from topic "cot-parser" into integration ...

* changes:
  plat/arm: fvp: Increase BL2 maximum size
  lib: fconf: Implement a parser to populate CoT

Merge "doc: Correct CPACR.FPEN usage" into integration