Tegra210: new TZDRAM base address ...

This patch modifies the TZDRAM base address to the new aperture
allocated by the bootloader.

Change-Id: Id158d15b1ec9aa681136d258e90fbba930aebf92
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra210: set core power state during cluster power down ...

This patch sets the core power state during cluster power down,
so that the 'get_target_pwr_state' handler can calculate the
proper states for all the affinity levels.

Change-Id: If4adb001011208916427ee1623c6c923bed99985
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: calculate proper power state for affinity levels ...

This patch fixes the 'tegra_soc_get_target_pwr_state' handler used to
calculate the proper state for each of the affinity levels.

Change-Id: Id16bd15b96f0fc633ffeac2d7a390592fbd0454b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: fix logic to calculate GICD_ISPENDR register address ...

This patch uses GICD_BASE to calculate the GICD_ISPENDR regsiter address
in the platform's 'plat_crash_print_regs' routine.

Reported by: Seth Eatinger <seatinger@nvidia.com>

Change-Id: Ic7be29abc781f475ad25b59582ae60a0a2497377
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: uninit and re-init console across System Suspend ...

This patch removes the console_init() from runtime_setup() as we already
initialize it earlier and disables/enables it across "System Suspend".

Change-Id: I992d3ca56ff4797faf83e8d7fa52c0ef3e1c3367
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: support for silicon/simulation platforms ...

This patch adds support to identify the underlying platform
on which we are running. The currently supported platforms
are actual silicon and simulation platforms.

Change-Id: Iadf96e79ec663b3dbd1a18e9bb95ffcdb82fc8af
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Merge pull request #859 from Summer-ARM/sq/update-doc ...

Update LOAD_IMAGE_V2 user guide documentation

AArch32: Enable override of plat_set_my_stack/plat_get_my_stack ...

This patch makes the default MP definitions of plat_get_my_stack()
and plat_set_my_stack() as weak so that they can be overridden by
the AArch32 Secure Payload if it requires.

Change-Id: I3b6ddff5750443a776505e3023ff2934227592b6
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

AArch32: Fix conditional inclusion of bakery_locks ...

Due to incorrect conditional compilation checks, bakery locks were
excluded from the CCN driver and the power controller driver for FVP
when BL32 was built as the EL3 Runtime Software in AArch32 mode.
This patch corrects the same.

Change-Id: Ib1f163d9167a5c38e4d622232c4835cad9c235aa
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

AArch32: Fix normal memory bakery compilation ...

This patch fixes a compilation issue with bakery locks when
PSCI library is compiled with USE_COHERENT_MEM = 0 build option.

Change-Id: Ic7f6cf9f2bb37f8a946eafbee9cbc3bf0dc7e900
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

Merge pull request #853 from vwadekar/tegra-changes-from-downstream-v3 ...

Tegra changes from downstream v3

PSCI: Optimize call paths if all participants are cache-coherent ...

The current PSCI implementation can apply certain optimizations upon the
assumption that all PSCI participants are cache-coherent.

  - Skip performing cache maintenance during power-up.

  - Skip performing cache maintenance during power-down:

    At present, on the power-down path, CPU driver disables caches and
    MMU, and performs cache maintenance in preparation for powering down
    the CPU. This means that PSCI must perform additional cache
    maintenance on the extant stack for correct functioning.

    If all participating CPUs are cache-coherent, CPU driver would
    neither disable MMU nor perform cache maintenance. The CPU being
    powered down, therefore, remain cache-coherent throughout all PSCI
    call paths. This in turn means that PSCI cache maintenance
    operations are not required during power down.

  - Choose spin locks instead of bakery locks:

    The current PSCI implementation must synchronize both cache-coherent
    and non-cache-coherent participants. Mutual exclusion primitives are
    not guaranteed to function on non-coherent memory. For this reason,
    the current PSCI implementation had to resort to bakery locks.

    If all participants are cache-coherent, the implementation can
    enable MMU and data caches early, and substitute bakery locks for
    spin locks. Spin locks make use of architectural mutual exclusion
    primitives, and are lighter and faster.

The optimizations are applied when HW_ASSISTED_COHERENCY build option is
enabled, as it's expected that all PSCI participants are cache-coherent
in those systems.

Change-Id: Iac51c3ed318ea7e2120f6b6a46fd2db2eae46ede
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

PSCI: Introduce cache and barrier wrappers ...

The PSCI implementation performs cache maintenance operations on its
data structures to ensure their visibility to both cache-coherent and
non-cache-coherent participants. These cache maintenance operations
can be skipped if all PSCI participants are cache-coherent. When
HW_ASSISTED_COHERENCY build option is enabled, we assume PSCI
participants are cache-coherent.

For usage abstraction, this patch introduces wrappers for PSCI cache
maintenance and barrier operations used for state coordination: they are
effectively NOPs when HW_ASSISTED_COHERENCY is enabled, but are
applied otherwise.

Also refactor local state usage and associated cache operations to make
it clearer.

Change-Id: I77f17a90cba41085b7188c1345fe5731c99fad87
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Disallow using coherent memory with hardware-assisted coherency ...

ARM Trusted Firmware keeps certain data structures in a memory region
with non-cacheable attributes (termed as "coherent memory") to keep data
coherent with observers that are cache-coherent, and those not. These
data structures pertain to power management and mutual exclusion. Using
coherent memory also costs at least an additional page to map memory
with special memory attributes.

On systems with hardware-assisted coherency, all CPUs that participate
in power management and mutual exclusion are cache-coherent, obviating
the need for special memory attributes for such data structures.
Instead, they can be placed in normal memory, along with rest of data.

On systems with hardware-assisted coherency, where build option
HW_ASSISTED_COHERENCY will be set, also having USE_COHERENT_MEMORY
enabled only wastes a page of memory without any
benefit. Therefore, with HW_ASSISTED_COHERENCY set to 1, require that
USE_COHERENT_MEMORY is explicitly set to 0.

Change-Id: I5101657ae6b1a46278069f23e2d88ee5cbd98efa
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Enable data caches early with hardware-assisted coherency ...

At present, warm-booted CPUs keep their caches disabled when enabling
MMU, and remains so until they enter coherency later.

On systems with hardware-assisted coherency, for which
HW_ASSISTED_COHERENCY build flag would be enabled, warm-booted CPUs can
have both caches and MMU enabled at once.

Change-Id: Icb0adb026e01aecf34beadf49c88faa9dd368327
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

build: Define build option for hardware-assisted coherency ...

The boolean build option HW_ASSISTED_COHERENCY is introduced to enable
various optimizations in ARM Trusted Software, when built for such
systems. It's set to 0 by default.

Change-Id: I638390da6e1718fe024dcf5b402e07084f1eb014
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Update LOAD_IMAGE_V2 user guide documentation ...

Now the TRUSTED_BOARD_BOOT is supported for AArch64 when LOAD_IMAGE_V2
is enabled. This patch updates the user-guide.md documentation for the
same.

Change-Id: I97de07435c81258c2a5f41a30a69736863a10bd1
Signed-off-by: Summer Qin <summer.qin@arm.com>

Flush the GIC driver data after init ...

The GIC driver data is initialized by the primary CPU with caches
enabled. When the secondary CPU boots up, it initializes the
GICC/GICR interface with the caches disabled and there is a chance that
the driver data is not yet written back to the memory. This patch fixes
this problem by flushing the driver data after they have been
initialized.

Change-Id: Ie9477029683846209593ff005d2bac559bb8f5e6
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

rockchip: plat_pm.c: Change callbacks implement for our SOCs. ...

Remove struct rockchip_pm_ops_cb and instead of using weak functions
implement; in this way we want the codes look clear and simple;

Change-Id: Ib9e8a5e932fdfc2b3e6a1ec502c40dfe720ac400
Signed-off-by: tony.xie <tony.xie@rock-chips.com>

Tegra: per-soc `get_target_pwr_state` handler ...

This patch implements a per-soc handler to calculate the target
power state for the cluster/system. A weak implementation of the
handler is provided for platforms to use by default.

For SoCs with multiple CPU clusters, this handler would provide
the individual cluster/system state, allowing the PSCI service to
flush caches during cluster/system power down.

Change-Id: I568cdb42204f9841a8430bd9105bd694f71cf91d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: relocate BL32 image to TZDRAM memory ...

This patch adds support to relocate the BL32 image from the NS
memory to TZDRAM during cold boot. The NS memory buffer is
cleared out after the process completes.

Change-Id: I1a033ffe73b8c309449f874d5187708d0a8846d2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

stdlib: add memcpy16() to string.h ...

This patch exports memcpy16() for platforms, as an option to
memcpy().

Change-Id: I5d4e1cfb4608ec3674224b1447fdd740de549b1f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: get BL31 arguments from previous bootloader ...

This patch implements handlers which platforms can override to
get the BL31 arguments passed by the previous bootloader.

Change-Id: I6b9628a984644ce1b5de5aa6d7cd890e57241d89
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: return BL32 entry point info if it is valid ...

This patch returns pointer to the BL32 entrypoint info only if
it is valid.

Change-Id: I71ce3c4626681753c94f3a7bbaa50c26c74874cb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: configure TZDRAM fence during early setup ...

This patch configures the TZDRAM fence during early platform
setup to allow the memory controller to enable DRAM encryption
before the TZDRAM actually gets used.

Change-Id: I0169ef9dda75699527b4e30c9e617a9036ba1d76
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: restore TZRAM settings on "System Resume" ...

This patch restores the TZRAM fence and the access permissions
on exiting the "System Suspend" state.

Change-Id: Ie313fca5a861c73f80df9639b01115780fb6e217
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: enable ECC/Parity protection for Cortex-A57 CPUs ...

This patch enables L2 ECC and Parity Protection for ARM Cortex-A57 CPUs
for Tegra SoCs.

Change-Id: I038fcd529991d0201a4951ce2730ab71b1c980f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: GIC: differentiate between FIQs targeted towards EL3/S-EL1 ...

This patch modifies the secure IRQ registration process to allow platforms
to specify the target CPUs as well as the owner of the IRQ. IRQs "owned"
by the EL3 would return INTR_TYPE_EL3 whereas those owned by the Trusted
OS would return INTR_TYPE_S_EL1 as a result.

Change-Id: I528f7c8220d0ae0c0f354e78d69e188abb666ef6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: implement FIQ interrupt handler ...

This patch adds a handler for FIQ interrupts triggered when
the CPU is in the NS world. The handler stores the NS world's
context along with ELR_EL3/SPSR_EL3.

The NS world driver issues an SMC initially to register it's
handler. The monitor firmware stores this handler address and
jumps to it when the FIQ interrupt fires. Upon entry into the
NS world the driver then issues another SMC to get the CPU
context when the FIQ fired. This allows the NS world driver to
determine the CPU state and call stack when the interrupt
fired. Generally, systems register watchdog interrupts as FIQs
which are then used to get the CPU state during hangs/crashes.

Change-Id: I733af61a08d1318c75acedbe9569a758744edd0c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Tegra: GIC: enable FIQ interrupt handling ...

Tegra chips support multiple FIQ interrupt sources. These interrupts
are enabled in the GICD/GICC interfaces by the tegra_gic driver. A
new FIQ handler would be added in a subsequent change which can be
registered by the platform code.

This patch adds the GIC programming as part of the tegra_gic_setup()
which now takes an array of all the FIQ interrupts to be enabled for
the platform. The Tegra132 and Tegra210 platforms right now do not
register for any FIQ interrupts themselves, but will definitely use
this support in the future.

Change-Id: I0ea164be901cd6681167028fea0567399f18d4b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>