maintainers.rst: separate maintainership of uniphier and synquacer ...

Socionext has multiple product lines.  The UniPhier is not the only
platform any more.  Correct the maintainership.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge pull request #1443 from jeenu-arm/sdei-fixes ...

SDEI client EL determination fix

SDEI: Fix name of internal function ...

The function end_sdei_explicit_dispatch() was intended to be
end_sdei_synchronous_dispatch() which does the opposite of
begin_sdei_synchronous_dispatch(). This patch fixes that.

No functional changes.

Change-Id: I141bd91eb342ecf4ddfd05b49513eee4549e7a56
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

SDEI: Fix determining client EL ...

commit 2ccfcb2 ("SDEI: Determine client
EL from NS context's SCR_EL3") intended to read from SCR_EL3, but
wrongly read from SPSR_EL3 instead. This patch fixes that.

Change-Id: I8ffea39cc98ef59cb8e7a4c6ef4cb12011c58536
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Merge pull request #1442 from jeenu-arm/sdei-dispatch-fix ...

SDEI: Fix dispatch bug

SDEI: Fix dispatch bug ...

The Commit cdb6ac9 introduced a bug
because of which the SDEI dispatcher wrongly panic when an SDEI event
dispatched earlier as a result of interrupt. This patch fixes the check
for a bound interrupt.

Change-Id: If55c8f0422ff781731248bbbc9c1b59fa0d3c4b0
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Merge pull request #1437 from jeenu-arm/ras-remaining ...

SDEI dispatch changes to enable RAS use cases

Merge pull request #1440 from antonio-nino-diaz-arm/an/xlat-enums ...

xlat: Remove mmap_attr_t enum type

Merge pull request #1427 from b49020/integration ...

Add support for Socionext Synquacer SC2A11 SoC based Developerbox platform.

xlat: Remove mmap_attr_t enum type ...

The values defined in this type are used in logical operations, which
goes against MISRA Rule 10.1: "Operands shall not be of an inappropriate
essential type".

Now, `unsigned int` is used instead. This also allows us to move the
dynamic mapping bit from 30 to 31. It was an undefined behaviour in the
past because an enum is signed by default, and bit 31 corresponds to the
sign bit. It is undefined behaviour to modify the sign bit. Now, bit 31
is free to use as it was originally meant to be.

mmap_attr_t is now defined as an `unsigned int` for backwards
compatibility.

Change-Id: I6b31218c14b9c7fdabebe432de7fae6e90a97f34
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Merge pull request #1436 from antonio-nino-diaz-arm/an/spm-sync ...

SPM: Allow entering the SP without needing a SMC

Arm platforms: Remove common RAS configuration source ...

The file arm_ras.c intended to provide common platform-specific RAS
configuration for Arm platforms. Because this file has symbol
definitions, it's proving difficult to provide a common definition.

This patch therefore renames and makes the file specific to FVP. Other
platforms shall provide their own configuration in similar fashion.

Change-Id: I766fd238946e3e49cdb659680e1b45f41b237901
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

SDEI: Make dispatches synchronous ...

SDEI event dispatches currently only sets up the Non-secure context
before returning to the caller. The actual dispatch only happens upon
exiting EL3 next time.

However, for various error handling scenarios, it's beneficial to have
the dispatch happen synchronously. I.e. when receiving SDEI interrupt,
or for a successful sdei_dispatch_event() call, the event handler is
executed; and upon the event completion, dispatcher execution resumes
after the point of dispatch. The jump primitives introduced in the
earlier patch facilitates this feature.

With this patch:

  - SDEI interrupts and calls to sdei_dispatch_event prepares the NS
    context for event dispatch, then sets a jump point, and immediately
    exits EL3. This results in the client handler executing in
    Non-secure.

  - When the SDEI client completes the dispatched event, the SDEI
    dispatcher does a longjmp to the jump pointer created earlier. For
    the caller of the sdei_dispatch_event() in particular, this would
    appear as if call returned successfully.

The dynamic workaround for CVE_2018_3639 is slightly shifted around as
part of related minor refactoring. It doesn't affect the workaround
functionality.

Documentation updated.

NOTE: This breaks the semantics of the explicit dispatch API, and any
exiting usages should be carefully reviewed.

Change-Id: Ib9c876d27ea2af7fb22de49832e55a0da83da3f9
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

BL31: Introduce jump primitives ...

This patch introduces setjmp() and ongjmp() primitives to enable
standard setjmp/longjmp style execution. Both APIs parameters take a
pointer to struct jmpbuf type, which hosts CPU registers saved/restored
during jump.

As per the standard usage:

  - setjmp() return 0 when a jump is setup; and a non-zero value when
    returning from jump.

  - The caller of setjmp() must not return, or otherwise update stack
    pointer since.

Change-Id: I4af1d32e490cfa547979631b762b4cba188d0551
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

SDEI: Determine client EL from NS context's SCR_EL3 ...

Currently, the dispatcher reads from SCR_EL3 register directly to
determine the EL of SDEI client. This is with the assumption that
SCR_EL3 is not modified throughout. However, with RAS work flows, it's
possible that SCR_EL3 register contains values corresponding to Secure
world, and therefore EL determination can go wrong. To mitigate this,
always read the register from the saved Non-secure context.

Change-Id: Ic85e4021deb18eb58757f676f9a001174998543a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

SDEI: Allow platforms to define explicit events ...

The current macros only allow to define dynamic and statically-bound
SDEI events. However, there ought be a mechanism to define SDEI events
that are explicitly dispatched; i.e., events that are dispatched as a
result of a previous secure interrupt or other exception

This patch introduces SDEI_EXPLICIT_EVENT() macro to define an explicit
event. They must be placed under private mappings. Only the priority
flags are allowed to be additionally specified.

Documentation updated.

Change-Id: I2e12f5571381195d6234c9dfbd5904608ad41db3
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Merge pull request #1439 from dp-arm/dp/bl2_size ...

fvp: Increase BL2 size for TBBR builds

fvp: Increase BL2 size for TBBR builds ...

Change-Id: I67e64bb79cc984ea3263f069e22738a42321c46d
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Merge pull request #1428 from jeenu-arm/mbedtls ...

Move to mbedtls-2.10.0 tag

Merge pull request #1434 from soby-mathew/sm/fix_cntfrq ...

ARM Platforms: Update CNTFRQ register in CNTCTLBase frame

Merge pull request #1435 from antonio-nino-diaz-arm/an/xlat-fix ...

xlat_v2: Fix descriptor debug print

Merge pull request #1433 from sivadur/integration ...

xilinx: fix zynqmp build when tsp is enabled

xlat_v2: Fix descriptor debug print ...

The XN, PXN and UXN bits are part of the upper attributes, not the
lower attributes.

Change-Id: Ia5e83f06f2a8de88b551f55f1d36d694918ccbc0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

synquacer: Add platform makefile and documentation ...

Add Makefile and plaform definations file.
My thanks to Daniel Thompson and Ard Biesheuvel for the bits and pieces
I've taken from their earlier work regarding build and deploy steps for
Developerbox based on Synquacer SoCs. They deserve much of the credit
for this work although, since I assembled and tested things, any blame
is probably mine.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

synquacer: Enable PSCI framework ...

PSCI framework uses SCPI driver to communicate to SCP firmware for
various power management operations. Following PSCI operations are
supported:
- CPU ON
- CPU OFF
- CPU STANDBY
- SYSTEM RESET
- SYSTEM OFF

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer: Retrieve DRAM info from SCP firmware ...

Retrieve DRAM info from SCP firmware using SCPI driver. Board supports
multiple DRAM slots so its required to fetch DRAM info from SCP firmware
and pass this info to UEFI via non-secure SRAM.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer: Add SCPI driver ...

Add System Control and Power Interface (SCPI) driver which provides APIs
for PSCI framework to work. SCPI driver uses MHU driver APIs to communicate
with SCP firmware for various system control and power operations.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer: Add MHU driver ...

Add Message Handling Unit (MHU) driver used to communicate among
Application Processors (AP) and System Control Processor (SCP).

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer: Enable MMU using xlat_tables_v2 library ...

BL31 runs from SRAM which is a non-coherent memory on synquacer. So
enable MMU with SRAM memory marked as Non-Cacheable and mark page tables
kept on SRAM as Non-Cacheable via XLAT_TABLE_NC flag. Also add page tables
for Device address space.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

synquacer: Enable System level Generic timer ...

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>